They usually printed the instructions on the inside of the box in the past. The QR code saves them time and money on printing and lets you keep the box more intact for people who likes boxart
The Shining Gundam is only 16 meters tall. This specific G-Frame is super close to true 1/44 scale. Most HGCE kits and EG Strike are a little taller than they should be canonically.
All of the Gundam series established in the 90's (AKA Japan's lost decade) before Turn A have kits in the HGUC line that are closer to 1/132 scale. My theory is that this is what their heights would have been if they didn't need to cut costs in the 90's.
In SoCal Japanese supermarkets these go for around $12 each ($24 frame+armor) and some of them are released as a combined F+A set in one box for $16-20 to save a few bucks. So in many cases they are more expensive than HG 1/144 kits, just easier to assemble. Mobility Joint Gundam 3 series just came out here ($11), picked up the ReZel, Unicorn and Sinanju.
I collect G-frames, Converge, HG, 30minutes Mission, MG, RG.... You name it, I probably have some sort of representation of that kit in my collection. I always enjoy these G-frame kits as a fun distraction when I can find them.
Do these use 3mm pegs like the bandai 30minute missions kits and the same scale c clips etc really keen to mix and match these with my 30 minute missions kits but want to make sure everything is compatible before i buy one
I have 4 of the older gframe kits. Hobby Lobby sells them and about once a month puts all their model kits on 40% off so you could get them for about $10.
Do these use 3mm pegs like the bandai 30minute missions kits and the same scale c clips etc really keen to mix and match these with my 30 minute missions kits but want to make sure everything is compatible before i buy one
I think the G-Frames are interesting but I find more ROI on just buying a model kit. Though I really liked the Universal Unit line as the only difference for the A and B versions was one weapon. The G-Frame "frame" is pretty useless by itself but it has the items you wish came with the "armor".
PSA: The fifth figure set in the full case is NOT guaranteed to be a GM Custom. I ordered a set from Japan and it was 100% sealed, but when I cracked it open it had two Shining Gundams and only ONE GM Custom!!! This was problematic because I ordered the case with a "co-pay" deal with some friends, and two of us wanted a GM Custom...
In the US, all the stores have the Armor and Frame boxes together as one item to buy. Also, you could argue that since the Bandai Spirits division doesn't make the G-Frame candy toys then they aren't technically model kits.
@@wizardmanaia4664 Bandai Spirits is the division of Bandai Namco that specifically makes model kits so I am saying anything not made by Bandai Spirits could not be qualified as a model kit. All candy toys like the G-Frame are not made by Bandai Spirits.
@@SamRK-1000 even 1/100 regular grade ones too. ^ ^ I was analyzing its 1/144 Old non-timeline HG both kits right before MG version released. And my 144 HG Virtue has hollow parts for bulky legs whether if it fits on Nadleh legs or not.
I'd say no. Because you only really build the frame and the build isn't really like other kits. I think the Entry Grade kits are probably what you might want as like a cheap simple introduction you can build without tools to see if you'd be interested in the hobby. Cheaper than the G Frames and a nice option if you like the Nu, Strike, or original RX-78 Gundam. But HGs are all fairly simple and the only tools you absolutely need for them are some hobby nippers and a hobby knife to clean up nub marks. No reason to feel intimidated. I would really say to just find an HG or EG you think looks cool or is piloted by a character you like and just jump in.
I am very new to gunpla and I am a little intimidated..I would love to pick up some gframes of a few suites so I have something for my shelf while I hone my skills...but I haven't had much luck finding gframes online...any suggestions
Depending on where you live, places like Barnes & Noble, Target, and dedicated hobby stores sell them. TBH, I would suggest just getting some Entry Grade kits and technically all Bandai model kits are just as easy to build no matter the grade
If you can't find the G Frames, have you considered the Entry Grades? There's only three in the line so far (Strike, Nu, RX--78-2) but as the name implies they're supposed to be a good entry point. They're same size as high grades but a little cheaper and the way the runners work you don't need tools to get them out cleanly. But also I don't think there is any shame in having, say, having a straight build High Grade kit that might not have the best nub remove on display. Like it's still a cool robot. You still built it. You can show it off.
I'm a big fan of the G-Frames. Instant Gunpla. Who cares about the seam lines. They are a neat addition to a Gunpla collection. I've managed to pick up the White Zeta, Nu Gundam & Sazabi versions. Top 👍
They usually printed the instructions on the inside of the box in the past. The QR code saves them time and money on printing and lets you keep the box more intact for people who likes boxart
The Shining Gundam is only 16 meters tall. This specific G-Frame is super close to true 1/44 scale. Most HGCE kits and EG Strike are a little taller than they should be canonically.
All of the Gundam series established in the 90's (AKA Japan's lost decade) before Turn A have kits in the HGUC line that are closer to 1/132 scale. My theory is that this is what their heights would have been if they didn't need to cut costs in the 90's.
In SoCal Japanese supermarkets these go for around $12 each ($24 frame+armor) and some of them are released as a combined F+A set in one box for $16-20 to save a few bucks. So in many cases they are more expensive than HG 1/144 kits, just easier to assemble. Mobility Joint Gundam 3 series just came out here ($11), picked up the ReZel, Unicorn and Sinanju.
Yeah import costs and all. They end up being so pricey for what should be a cheap entry grade type set
I got one with frame and armor the other discounted to $4 at hobby lobby. So if anyone is interested but the price is too high keep an eye out
I collect G-frames, Converge, HG, 30minutes Mission, MG, RG.... You name it, I probably have some sort of representation of that kit in my collection. I always enjoy these G-frame kits as a fun distraction when I can find them.
Do these use 3mm pegs like the bandai 30minute missions kits and the same scale c clips etc really keen to mix and match these with my 30 minute missions kits but want to make sure everything is compatible before i buy one
Big fan of the HUGE santa with the Zaku
With this scale they perfect for table top gaming.
if I remembered correctly the set that allows the G-Frame Zeta to transform into its Wave Rider mode is a P-Bandai set and comes in a larger box.
+1000 points for the spongebob reference
Haha glad someone caught it 👍
I have 4 of the older gframe kits. Hobby Lobby sells them and about once a month puts all their model kits on 40% off so you could get them for about $10.
Where I live they have the 40% off every two weeks/every Thursday or Friday
@ 4:10 the international versions have had the directions printed on the inside of the box which i thought was pretty neat.
Do these use 3mm pegs like the bandai 30minute missions kits and the same scale c clips etc really keen to mix and match these with my 30 minute missions kits but want to make sure everything is compatible before i buy one
I think the G-Frames are interesting but I find more ROI on just buying a model kit. Though I really liked the Universal Unit line as the only difference for the A and B versions was one weapon. The G-Frame "frame" is pretty useless by itself but it has the items you wish came with the "armor".
These just make me miss MSiAs more for some reason.
hi, what stand base are you using? I'm currently loooking for 1 that could fit perfectly for my unicorn g frame
G-Frame contest would be cool. Shining Gundam. I have that one.
PSA: The fifth figure set in the full case is NOT guaranteed to be a GM Custom. I ordered a set from Japan and it was 100% sealed, but when I cracked it open it had two Shining Gundams and only ONE GM Custom!!!
This was problematic because I ordered the case with a "co-pay" deal with some friends, and two of us wanted a GM Custom...
Good to know! Thanks for sharing
Those gm custom hands should have come with the rick dias as well, quite challenging
For the zaku there is the small tab to move the eye at the bottom instead of removing the top
In the US, all the stores have the Armor and Frame boxes together as one item to buy. Also, you could argue that since the Bandai Spirits division doesn't make the G-Frame candy toys then they aren't technically model kits.
On what technicality... I'll wait.
@@wizardmanaia4664 Bandai Spirits is the division of Bandai Namco that specifically makes model kits so I am saying anything not made by Bandai Spirits could not be qualified as a model kit. All candy toys like the G-Frame are not made by Bandai Spirits.
for cheapo toys, these actually look pretty good
Hope you get to check the mobility line as well
The HG GM Custom is still a great kit. I recommend you check it out.
The hands from the Zaku would look good on a stral MA.k suit
The GM custom to me is the coolest looking.
I kinda like the Zaku II FZ's design.
I’ve so been wanting to get those kits but here in Ontario I can’t find them anywhere unfortunately 😔. Also zeta is my favourite 😊
These are actually really cool. Simple but good if you want to do a quick build.
the quality of the plastic is very similar to no grade? it really looks like a cheap plastic
Hopefully they make a g frame kshatriya
Didn't hesitate to pre-order Hyper mode Shining Gundam. Gamble pays off.
these are cool as heck
Wanted to try G Frame but in my country the price is higher than most HG.
a hard point for a stand peg on the santa figure? No, no. That’s for giving santa a funnel system back pack.
I can imagine 1/144 HG Nadleh with HG Virtue armor parts clips and fits the whole body like a glove. But.. 😅
Master grade already exists, and two versions of HG nadleeh/virtue were made
@@SamRK-1000 even 1/100 regular grade ones too. ^ ^
I was analyzing its 1/144 Old non-timeline HG both kits right before MG version released. And my 144 HG Virtue has hollow parts for bulky legs whether if it fits on Nadleh legs or not.
Scale?
So mine came pre built and it had a frame…so I’m kinda confused lol did I get two frames in a set?
23:14 I believe you're thinking of the SDCS version, there's been nothing announced for G-Frame
Hmm maybe you’re right
take a shot every time hands are mentioned
That the candy toy for the Zaku FZ / Kai has better color separation than the HG feels sad.
Is there any difference between the gframe line and the hg line?
HG is a model kit you need nippers to build, g frame is a building toy
Considering the environmental messaging in a lot of Gundam series, you think Bandai would have switched to plastic free packaging by now.
Would you agree that G-Frame kits may be a better option that an HG kit for beginners?
I'd say no. Because you only really build the frame and the build isn't really like other kits. I think the Entry Grade kits are probably what you might want as like a cheap simple introduction you can build without tools to see if you'd be interested in the hobby. Cheaper than the G Frames and a nice option if you like the Nu, Strike, or original RX-78 Gundam. But HGs are all fairly simple and the only tools you absolutely need for them are some hobby nippers and a hobby knife to clean up nub marks. No reason to feel intimidated. I would really say to just find an HG or EG you think looks cool or is piloted by a character you like and just jump in.
I am very new to gunpla and I am a little intimidated..I would love to pick up some gframes of a few suites so I have something for my shelf while I hone my skills...but I haven't had much luck finding gframes online...any suggestions
Depending on where you live, places like Barnes & Noble, Target, and dedicated hobby stores sell them. TBH, I would suggest just getting some Entry Grade kits and technically all Bandai model kits are just as easy to build no matter the grade
@@reijigamer thankyou
If you can't find the G Frames, have you considered the Entry Grades? There's only three in the line so far (Strike, Nu, RX--78-2) but as the name implies they're supposed to be a good entry point. They're same size as high grades but a little cheaper and the way the runners work you don't need tools to get them out cleanly. But also I don't think there is any shame in having, say, having a straight build High Grade kit that might not have the best nub remove on display. Like it's still a cool robot. You still built it. You can show it off.
This hobby a disabled child can do. Don't be intimidated
Why never size compare 😭
These are slightly smaller than 1/144
They really gave the Zaku II yaoi hands
I call'em Gumdam
I'm a big fan of the G-Frames. Instant Gunpla. Who cares about the seam lines. They are a neat addition to a Gunpla collection. I've managed to pick up the White Zeta, Nu Gundam & Sazabi versions. Top 👍
😎👍🏼
Ace combat 7 is best game made by Bandai
Tales series says otherwise
@Solbrave amd failed.
Probably one of the best game/ franchise published by bandai, then yes
wumbo
I don't know if I should buy a high grade that doesn't look like shit or this
useless toys... I miss painting and customizing MG kits so bad...
Candy kits like this have existed in Gundam long before the MG line slowed down. These didn't replace MGs.