Chuck, you struck again. I've got a turn signal issue on my 92. Granted I believe it's somewhere in my column but still, you've just motivated me to start tracing it cus what wires are what have been my reasoning for not looking yet. Thanks again man and keep rockin!
Hey I’ve been working on my 89 YJ and you’ve helped me so much especially with the lighting and dash, even have the same phone mount. I want to start something new with adding a edelbrock air filter because I want to replace the original to clean up the engine make it look less cluttered but I can’t find a real how to video or instructions on it. Hope you can point me to the right direction
Sir, thank you so much for your help on this you are very descriptive and I was able to figure out how to get the daytime running lights going on my van👍👍👍👍👍
I am installing a digital dash that is tablet-based, and I need to wire physical turn signal indicators from my existing turn signals to my new bezel, as I don't have Ford's extended PIDs (Mode 22 PIDs) for the turn signals to use in the app. You literally saved me half an hour of diag time, and that is worth a whole lot to me. subbed, and thank you. I can use any ground for the turn signals, correct?
Typically on a regular style circuit, yes you can use any ground. There are the rare occasions where a circuit is switched by the ground. So not totally knowing what you have going on that's the best answer I can give you. Hope that answer helps. I like seeing comments where my video helps someone. Glad it helped, thanks for the sub, and thanks for taking the time to leave an awesome comment!
Too bad my car requires me to remove a bunch of stuff because it's rather compact… kinda wish the car manual just told us where the wires are and what they do
I hope you might know.... I have a 95 YJ, 4cyl, automatic. Actually I have 2, one is a parts jeep. The grill was bent and twisted on my daily driver. So a friend (jackass) said he would change out the grill for me. After he finished, the windshield wipers will sometimes come on when I turn on the headlights or right hand turn signal, ot use my brights. I can stop the vehicle and fiddle with the wires behind the drivers side headlight and make it act right. But I don't really know what I'm doing and I'm afraid I could get electrocuted if he got something really messed up in there. Can you tell me what could possibly make this happen and how to fix it? Any help would be appreciated. Thank you.
You saved my ass with this one lol. Thank you for the very informative video and fast responses. Are you here in Kentucky?
You are very welcome! Glad that helped!! Nope, I'm in Tennessee, but Franklin Kentucky is only about 20 - 30 minutes from me.
Chuck, you struck again. I've got a turn signal issue on my 92. Granted I believe it's somewhere in my column but still, you've just motivated me to start tracing it cus what wires are what have been my reasoning for not looking yet. Thanks again man and keep rockin!
Very informative video that explains it in a really good way. Very useful technique and some really good ideas, Good job!
Mint video Chuck!!! You always are top shelf
Hey I’ve been working on my 89 YJ and you’ve helped me so much especially with the lighting and dash, even have the same phone mount. I want to start something new with adding a edelbrock air filter because I want to replace the original to clean up the engine make it look less cluttered but I can’t find a real how to video or instructions on it. Hope you can point me to the right direction
Sir, thank you so much for your help on this you are very descriptive and I was able to figure out how to get the daytime running lights going on my van👍👍👍👍👍
Sweet!! You are very welcome. Glad the video helped you!!
Nice video have Ns 95 Stang no daylights and no turn signals thinking it's in the ignition
Will it still light up just by touching the cord or do you need to touch the metal inside the wires to have it light up?
I am installing a digital dash that is tablet-based, and I need to wire physical turn signal indicators from my existing turn signals to my new bezel, as I don't have Ford's extended PIDs (Mode 22 PIDs) for the turn signals to use in the app. You literally saved me half an hour of diag time, and that is worth a whole lot to me. subbed, and thank you.
I can use any ground for the turn signals, correct?
Typically on a regular style circuit, yes you can use any ground. There are the rare occasions where a circuit is switched by the ground. So not totally knowing what you have going on that's the best answer I can give you. Hope that answer helps. I like seeing comments where my video helps someone. Glad it helped, thanks for the sub, and thanks for taking the time to leave an awesome comment!
if you are trying to find out why your lights are not working hook clamp to pos and test for ground this might help thanx
Thank you man for real from the heart ♥️
Nice job my man!
Thank you! Hope it helped!
Thanks so much! You've taught me so much!
Too bad my car requires me to remove a bunch of stuff because it's rather compact… kinda wish the car manual just told us where the wires are and what they do
Solid vid mate, thank you
Glad it helped, you are welcome!
Great info .. !! thanks
You are welcome! Glad you liked it.
So by doing that adding flashing bulb, do I have to change my fuse amperage value if in case?
Nope, factory fuse will be fine.
Thanks a lot. By the way I have subaru forester, what wire gauge should I get? I have a lot of stock wires at home, just asking to same some money.
There’s two wires for the turn signals?
Did you ever figure out a way to engage your emergency brake under 8.8? Or did I miss that video.
I hope you might know.... I have a 95 YJ, 4cyl, automatic. Actually I have 2, one is a parts jeep. The grill was bent and twisted on my daily driver. So a friend (jackass) said he would change out the grill for me. After he finished, the windshield wipers will sometimes come on when I turn on the headlights or right hand turn signal, ot use my brights. I can stop the vehicle and fiddle with the wires behind the drivers side headlight and make it act right. But I don't really know what I'm doing and I'm afraid I could get electrocuted if he got something really messed up in there. Can you tell me what could possibly make this happen and how to fix it? Any help would be appreciated. Thank you.
Oh yeah
Hope the video helped.
@@Poweraddicts very helpful
@9:46 he sticks his light meter into the relay spot & it turns on but says nada. I know I wasn't seeing things....maybe
Hey .. I have duh moments very often :-)
😒 Promo>SM!!!