u got that right about the heat lol. me and the shaw were working just down from timberlands the other day and ran into your old man out for a bike ride, always good to see him and listen to some old stories. stoked to see what can be done with these 500s rock on don
@@donnywalker4691 not yet! I ordered a new tsumura bar for when it shipped but it showed up about 5 days earlier than I thought. I might have to throw one of my shorter bars on it for now just to use it. I don’t have much patience left. I started it up on arrival and it sounds amazing.
Even if a fella has a old drill, I use a 1/2 inch chuck from a dewalt hammer drill on my setup works great! We're hurting in manitoba too for rain and heat has been off the charts all summer above normal for most of the year already. Hope all is getting better your way!
That was good info on doing the timing set up that Oregon chain I have never seen one like that it was odd enjoy you fishing I hope Catch bunch . As for the fires we Evacuated because the dixi fir. I have a buddy who I work with on the week end s doing fire wood with he Stayed behind I’m working with the fire crews in Palma’s county California the fire is bad up there
Donnie use Vacuum caps on the crank ends to protect the threads from the drill chuck. it may never hurt the threads but it's still a little extra protection.
Hey Donny for that bolt behind the dog on the 500i that secures the av would recommend using a blue loctite to better prevent that bolt from vibrating out?
Hey donny you think you'd ever do a video on how to file carbide chain's?? I heard those chain's cut like a hot knife through butter when there really sharp.
As always great vid and info. Did you buy the vice or make it to hold the jug. I am honoring my old age now and holding by hand no longer works. If you can share much appreciated. Be safe and be careful.
Hey there I like both of those saws the only thing I don’t like with 562 is that it’s old auto tune they have had issues with I’m hoping they will update it to new auto tune version and the 362 is good now after about 50 changes and they have the new 3.0 mtronic version so really I just like the way 562 feels and so smooth email walkerized@shaw.ca for pricing cheers
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
Hi Donny, we missed you:)
God Bless and Protect you and your Family.
Thank you for sharing your wisdom with us!!!
Amen
u got that right about the heat lol. me and the shaw were working just down from timberlands the other day and ran into your old man out for a bike ride, always good to see him and listen to some old stories. stoked to see what can be done with these 500s rock on don
Hogan, I wish you and BBR and Donny ALL good safe days & journey thru life!
500s workin good eh don
Thank you for your time and insight!
I’m hand filing chains and watching you annndd enjoying a doob.... awesome can’t get better then this
Nice one Donny! Cool to see the 500i’s getting some work. Would love to put a ported one through Aussie hardwood
I got my 461 a couple days ago, thank you, Donny!
Have you used it yet bud
@@donnywalker4691 not yet! I ordered a new tsumura bar for when it shipped but it showed up about 5 days earlier than I thought.
I might have to throw one of my shorter bars on it for now just to use it. I don’t have much patience left. I started it up on arrival and it sounds amazing.
GREAT JOB AS ALWAYS BUDDY
Thanks buddy I appreciate all you do! Sure hope you catch lots of fish.
Even if a fella has a old drill, I use a 1/2 inch chuck from a dewalt hammer drill on my setup works great!
We're hurting in manitoba too for rain and heat has been off the charts all summer above normal for most of the year already. Hope all is getting better your way!
Saludosssss! DESDE Argentina
That was good info on doing the timing set up that Oregon chain I have never seen one like that it was odd enjoy you fishing I hope Catch bunch . As for the fires we Evacuated because the dixi fir. I have a buddy who I work with on the week end s doing fire wood with he Stayed behind I’m working with the fire crews in Palma’s county California the fire is bad up there
Hey Donny! Interesting chain! I’ve never seen one like it either!
I was mistaking. It is Oregon hyper skip chain
Thank s 500i. Thank you!!! Donny
God bless you and your family and everyone with us on the channel. With love Jay small
Hope u have a good weekend sir.
Donnie use Vacuum caps on the crank ends to protect the threads from the drill chuck. it may never hurt the threads but it's still a little extra protection.
Hey Donny!!
Donny look forward to seeing you milling always looking for more help an tips stu
How much do you charge to port a new Stihl 500i?
I’ve been throwing .020” squish on them 500i.....
Nice.😆 😆.💪
Hey Donny for that bolt behind the dog on the 500i that secures the av would recommend using a blue loctite to better prevent that bolt from vibrating out?
It screws into plastic, somewhat self locking, don’t over torque.
I rigged my timing wheel up by bolting the wheel right to the chuck. I think you could remove the adapter and do the same
What do you think about the barkbox ,max flow filter on the 500i with your porting?
I think they call that Oregon chain 27RX Hyper Skip Ripping Chain.
In the east they call that chain a Appalachian girl, two teeth, nothin, two teeth, nothin! 🤣🤣
Hey donny you think you'd ever do a video on how to file carbide chain's?? I heard those chain's cut like a hot knife through butter when there really sharp.
Carbide or chisel chain if it’s carbide I use a grinder with diamond wheels
I heard that stihl makes a milling chain like that now days
Hey Donny how goes it hope all is well with you..
yippee ky ya
hi donny i am looking for a ignition coil for a poineer 450 could you help please thankyou
As always great vid and info. Did you buy the vice or make it to hold the jug. I am honoring my old age now and holding by hand no longer works. If you can share much appreciated. Be safe and be careful.
I'd like to know also.
It’s called a panavise works great
Thank you sir
That unknown chain I recently saw a post about it, and it's called hyperskip apparently
Thanks I’m going to try it out soon
@@donnywalker4691looks pretty wild! I never looked it up to see if that was proper term but I don't imagine it's a fast cutter 😂
Hey don great video as always 🔧🔧. Where do you get those long bits?
From cs speciality
@@donnywalker4691 ok thanks 👊
There a good price and last for ever the part number I think is rc26 diamond double cut
Rc26l
Awesome appreciate it 👊
hey donny what ported saw do you like more husky 562 or stihl 362 and how much does one cost from you guys
Hey there I like both of those saws the only thing I don’t like with 562 is that it’s old auto tune they have had issues with I’m hoping they will update it to new auto tune version and the 362 is good now after about 50 changes and they have the new 3.0 mtronic version so really I just like the way 562 feels and so smooth email walkerized@shaw.ca for pricing cheers
Correction it’s Plumas County California lot of folk lost their home s
What would you charge to port an ms660 and can you smooth it out..
I charge $250 plus parts might run a bit smoother or put soft mounts on it
I have a question for you donny is it possible to turbo charge a chainsaw.
I’m sure ya could I built a echo hotsaw with nos worked good check out tho TH-cam guy 2 stroke stuffing is his name he does cool stuff
Thanks donny
Johnny my name is Nate I live in Michigan looking for an MS 361 if you could help me with that
do u only port the exhaust on the 500i?
You're gonna fish for springs, what the heck are those?
Spring salmon the best come over for a barbecue
Johnny my name is Nate I live in Michigan looking for an MS 361 if you can help me with that