That car was absolutely hammered and you made it glow with a warmth not usually captured by TH-cam video quality. A fabulous job, my friend! I dont think I have ever seen that much reaction from iron fallout removal. Either that car was parked inside a steel foundry every day or you have a very high quality concoction. My guess is both😂. I am always looking for great product to make my white paint correction better. I'm going to try a bottle of this polish and see if I can get your results! I am truly grateful for your channel.
Looks fantastic. I always find a full Decon makes the most difference for white cars. Most you see are peppered in unsightly tar and iron spots which some people actually think are chips
Tell u what biggest enemy of mine is the branches from the tree above my spot in driveway thinking it's a form of maple tree. HavenT cared enough to look in the 8+ years I bought the property lol Drips some coffee colored sap and it's hard as hell to remove. Protected from UV but birds and sap man...lol garage is getting cleared I may save my new car from Ohio winter and park in garage
It's great to see a white car being done. Having a white car i know it's quite difficult to get good results. Cracking job done, I bet it looks better in the flesh then it does on camera
Nice job mate. It's a battle with the elements and the light in these winter months. Only good thing is the chemicals can dwell for a lot longer! The weather news and apps haven't particularly been accurate recently either. Both days doing mine and the mrs cars was meant to be less than 5% chance of rain both days. I managed to clean and wax mine just before it rained, started raining just as I was drying hers so no protection done sadly. I'm looking at getting something like Gyeon Q2M Wet Coat for these testing months. All the best!
Great video Mat, excellent gloss / clarity for a white car....funny thing, first car I ever used a fall out remover on was a white Scirocco and I had the same "re react" with it! Quick question....do you prefer a wax over a sealant on white cars? I was under the impression that a sealant was preferable for clarity?
Time more than anything. If it was a multi stage correction, and rotary polisher, then use I'd have masked up. But usually, when I'm on a DA and doing a single stage, I'll leave them and just go careful near those areas.
Hi Matt,just wondering what was the yellow coloured product you used to do rubber seals and badges on this car while the snow foam was dwelling on the car.fantastic channel keep up the incredible content
Lovely job mate in challenging UK conditions. If I don't have the time to use paste wax and ceramic coatings aren't an option financially what products could you recommend to use as a LSP 2 or 3 times a year? Cheers
Great video once again Matt, master of the editing. What a difference the sirocco looked, what what is the staining do you think on the alloy wheels chemical edging perhaps?
I’m the owner, it was from the summer when it was hot. Was some citrus pre wash and wheel cleaner than I must have let dwell too long and it dried I think. My failure as a beginner
Great content on the white car. What’s the best way to maintain a car once you have cut, polished and waxed a 20 plate car? Used all Meguiars Ultimate products. At the moment it’s just rinse, snow foam and 2 bucket shampoo weekly.
I've been using a 1:10 mix of Bilt Hamber's Auto QD as a drying aid after snow foam and rinse, and have been amazed how well it works. You can spray and wipe everything, including the glass, and the shine is very impressive. Obviously using a 1:10 mix also means it's good value, too! 👍👍👍
On the subject of fallout have a look on instagram , @twistedmindphoto , at my video about what fallout has done to my finger with not wearing gloves . Lesson learned
Cut me some slack, wanted PS4s dw they’ll be on soon. You’re right these are horrid tyres, can’t be taking these on the Scottish north coast 500 trip next year😂😂
Sorry. I think youtube have doubled their ads since corona as more people probably watch TH-cam now rather TV.... I'll have a look at manually sorting them.
Guys seriously. Please stop it with that constant music going in and out. This isn’t a music video? You don’t need music to watch a car wash video ffs.
wow, looks fantastic, white really pops once decontaminated, and polished!
Thank you 👍
That car was absolutely hammered and you made it glow with a warmth not usually captured by TH-cam video quality. A fabulous job, my friend! I dont think I have ever seen that much reaction from iron fallout removal. Either that car was parked inside a steel foundry every day or you have a very high quality concoction. My guess is both😂. I am always looking for great product to make my white paint correction better. I'm going to try a bottle of this polish and see if I can get your results! I am truly grateful for your channel.
Glad you enjoyed 👍
Looks fantastic. I always find a full Decon makes the most difference for white cars. Most you see are peppered in unsightly tar and iron spots which some people actually think are chips
Tell u what biggest enemy of mine is the branches from the tree above my spot in driveway thinking it's a form of maple tree. HavenT cared enough to look in the 8+ years I bought the property lol Drips some coffee colored sap and it's hard as hell to remove.
Protected from UV but birds and sap man...lol garage is getting cleared I may save my new car from Ohio winter and park in garage
It's great to see a white car being done. Having a white car i know it's quite difficult to get good results.
Cracking job done, I bet it looks better in the flesh then it does on camera
Fairplay to your twin helping you out 😀👍
Cracking job again Mat. Especially given the weather constraints! 👍
Nice job mate. It's a battle with the elements and the light in these winter months. Only good thing is the chemicals can dwell for a lot longer!
The weather news and apps haven't particularly been accurate recently either. Both days doing mine and the mrs cars was meant to be less than 5% chance of rain both days. I managed to clean and wax mine just before it rained, started raining just as I was drying hers so no protection done sadly. I'm looking at getting something like Gyeon Q2M Wet Coat for these testing months.
All the best!
A job I need to do with our white Adam , finally someone else doing a lighter coloured car . Thanks for that Mat
Nicely done video Mat. I have a white BMW 3 series Touring which will benefit greatly from using a similar approach.
Good editing...loved the clone helping you!
I thought it was his twin brother ! 😀
Oh my god! Scirocco is my dream car! (Like dream first cheap car at 18 yo)
they cost alot in maintenance btw. i own one
@@RatedGAF Do you have 1.4 or 2.0?
Lovely Jubbly, car looks modern and fresh now.
Great video, the paintwork looked amazing after the detail!!.
Definitely made the white shine! 👌
Great video Mat, excellent gloss / clarity for a white car....funny thing, first car I ever used a fall out remover on was a white Scirocco and I had the same "re react" with it! Quick question....do you prefer a wax over a sealant on white cars? I was under the impression that a sealant was preferable for clarity?
Great job. I miss your signature winter coat.
Hahahaha.... Still got it. Just wish doggo didn't rip the pocket on it 🤣
Great video Mat...as always.
Keep up the good work mate
Love you're videos, keep going with them 🙂👍
Hi looks good.
Is there a reason you did not protect the lights rubbers and plastics while u were polishing with an abrasive compound?
Time more than anything. If it was a multi stage correction, and rotary polisher, then use I'd have masked up. But usually, when I'm on a DA and doing a single stage, I'll leave them and just go careful near those areas.
Hi Mat,it does look alot better with the work done on this VW,the paint is so clean.Is DA the only way to do make white paint pop.👌
Cloudy days are the worst to show a good gloss factor
Indeed. Just have to catch a break in the coverage to try and get a few snaps/clips
White cars I think look great when clean and waxed and polished
Hi Matt,just wondering what was the yellow coloured product you used to do rubber seals and badges on this car while the snow foam was dwelling on the car.fantastic channel keep up the incredible content
I believe it would be an APC that he’s using, not 100% tho.
@@xbrillkill Thank you Joe,really appreciate it
Lovely job mate in challenging UK conditions.
If I don't have the time to use paste wax and ceramic coatings aren't an option financially what products could you recommend to use as a LSP 2 or 3 times a year? Cheers
GARAGE THERAPY SIGMA.
I HAVE A WHITE BMW X2 AND THE RESULTS ARE THE BEST I HAVE EVER SEEN.
What shampoo did you use here. Seems nice and thick.
Great video once again Matt, master of the editing. What a difference the sirocco looked, what what is the staining do you think on the alloy wheels chemical edging perhaps?
I’m the owner, it was from the summer when it was hot. Was some citrus pre wash and wheel cleaner than I must have let dwell too long and it dried I think. My failure as a beginner
Learning now though 😉👍
As above
@@TheDetailingSpace always learning something new!!
@@xbrillkill thanks for the reply, we all make mistakes, glad it came off with a bit of elbow grease from Mat
Great video, just bought a tin of the ltd edition EZ grinch wax 👍
Great content on the white car. What’s the best way to maintain a car once you have cut, polished and waxed a 20 plate car? Used all Meguiars Ultimate products. At the moment it’s just rinse, snow foam and 2 bucket shampoo weekly.
I've been using a 1:10 mix of Bilt Hamber's Auto QD as a drying aid after snow foam and rinse, and have been amazed how well it works. You can spray and wipe everything, including the glass, and the shine is very impressive. Obviously using a 1:10 mix also means it's good value, too! 👍👍👍
Wow, another great video. Keep up the good work
Hi Matt, great job. Which shampoo did you use? Tia.
Enjoyed the video, what pressure washer gun are you using?
Great video makes me want to get my Rocco done,where you based mate?
I'm in Chesterfield, where are you?
Great job!!
Good quality video!!
👍💪
How do you get the short pressure washer gun? Is it a nozzle attachment?
What do you mean?
@@TheDetailingSpace oH lol I found the replacement gun.
Annovi Reverberi MV925 Swivel Short Trigger Gun with Quick Release Nozzle Kit
Were you wiping the iron remover with a cloth?
Yeah
No need to tape off trim for polishing? The car looks beautiful.
If I was using a rotary I would 👍
Excellent job, mate - very impressive! 👌🏼
The Meguiars wheel cleaner is suppose to be applied to dry wheels isn’t it
wet or dry. dry probably means longer cling time
What the brand of the secret weapon product you use
Did you use panel wipe before the wax ?
Not on this one no....
great detail but the paint wasn't dull, just dirty.
Wish I could clone myself when washing my car 😁
Haha, it does come in handy 🤣
how much would this cost in the exact car?
Well that depends on where you are and local detailing rates
@@TheDetailingSpace based in west Yorkshire
How much would something like this cost please and where are you based?
I'm Chesterfield based.... Drop me a message on Instagram @randomlyset
Great video
I'm having trouble logging into Detail World forum Matt , are there any issues with it ? Thanks
Yes, it's been reported and they're looking into it
Lovely , thanks .
No problem
What machine are you using to dry the car
It's the Blo Air-GT from Clean & Shiny
@@TheDetailingSpace I'll have to take a look at it. Thanks for your reply.
No problem 👍
Algae and moss? Is this Golf from Shrek's Swamp?
Whats the name of the stuff you used on rubber and trims please?
Pretty sure it’s just an APC mate
@@xbrillkill Cheers Pal
How much does this cost
It depends on your area, vehicle condition etc
On the subject of fallout have a look on instagram , @twistedmindphoto , at my video about what fallout has done to my finger with not wearing gloves . Lesson learned
Where you based in the uk?
Derbyshire 👍
@@TheDetailingSpace whats your price on a detail like this? I have a 2018 ibiza which needs a good detail
Where are you based?
Email me at randomlyset @ Hotmail.co.uk
@@TheDetailingSpace Birmingham and no problem
Same car/alloys as my Rocco. Collects tar so easily
Owner needs to put some decent rubber on those alloys. Ditch finders on a performance coupe. 🤦🏼♂️🤦🏼♂️🤦🏼♂️
Cut me some slack, wanted PS4s dw they’ll be on soon. You’re right these are horrid tyres, can’t be taking these on the Scottish north coast 500 trip next year😂😂
Sounds like a good trip planned there 👍
@@xbrillkill 👍🏼👍🏼 good choice. I use them on my M3. Enjoy the NC500. Lovely car though mate.
@@TheDetailingSpace all being well with time off work/uni🤣
@@Detail_Den_UK M3 wow, one can only dream. Which one is it? And I know I’ve experienced an M135i with those tyres on and the back end did not budge!
Holy ads! Gone before watching just because of that many ads in the video. Deuces!
Sorry. I think youtube have doubled their ads since corona as more people probably watch TH-cam now rather TV.... I'll have a look at manually sorting them.
Auto smart poor valet materials
They're pretty decent TBF
Guys seriously. Please stop it with that constant music going in and out. This isn’t a music video? You don’t need music to watch a car wash video ffs.
Some people prefer to have background music rather than the constant drone of traffic noise nearby