Custom Torched Long Neck Scotty Cameron

Here is one I've been wanting to do for a LONG time. This is a custom long Knuckle Neck Squareback 2. Making it fully face balanced. This thing is AS good as my Red X I just did. I finished it with the longer 13+" Super Stroke to get the a balance right, as the neck added some weight. This thing is amazing! Feel free to ask any questions about this build! It was sort of a go with it type build, as I wasn't sure how I was going to get the lie, loft, and angles right with the neck, as I'm not a machinist, but it turned out awesome!
Music I Use: Bensound.com/royalty-free-music
License code: FKO6NXAFYTI45SPW
Music I use: www.bensound.com
License code: U7W73JSPZBSGERXT
Music I Use: www.bensound.c...
License code: 15LIUVMQJYD3NWC0
Music: Bensound.com/free-music-for-videos
License code: PPD6ETDQWMVSAXCM
Music I use: www.bensound.com
License code: NULTDTMLBYUPNYEW
Music by Bensound.com/free-music-for-videos
License code: WHCIZWDANZ2TPVSB
[e-mail]
Instagram iGolf906
A list of my tools and materials used.
Items may vary depending on stock and/or model
This is just a rough idea of all that is used. Feel free to purchase through these links to help me out with these videos! Thanks!
Grinder amzn.to/3WYFbXm
Convolute Wheels:
Recommended wheels: amzn.to/3T6p7mP
amzn.to/3Er5E8R
Cheaper Rough Cut Wheels for Cerakote Prep
amzn.to/4aZjQ6y
Buffing Wheel:
amzn.to/47gmeE4
Black Buffing Compound (220 Grit - Rough Buff)
amzn.to/3QkXHH1
Green Buffing Compound (700 Grit - Fine Buff)
amzn.to/3u0uyti
AIR Compressors:
Minimum: amzn.to/3MUyMtm
Ideal!: amzn.to/3MVrZ2y
Sand Blast Cabinet amzn.to/3TwiXct
Blast Media:
Coarse (for finish blasting) amzn.to/3g3L2Kj
Fine (for satin finishing) amzn.to/3tmg6Im
#100 for cerakote prep amzn.to/43Xy58I
Spray guns for Cerakote
amzn.to/3qYT50g
amzn.to/46lzLdA
Acetone (a must have cleaner and degreaser in my shop) amzn.to/3tn9tW7
Shop Towels & Cotton Wipes
amzn.to/3O1AsS4
amzn.to/48xSWl8
Stainless Black Patina Solution: (A better solution than the one I used)
amzn.to/46tK8v5
Paint Applicator Bottles:
amzn.to/460AsaW
Testors Paint amzn.to/3TwV6JI
amzn.to/3TyacP3
Tamiya Translucent (Scotty Colors)
Red amzn.to/3hFXZe4
Blue amzn.to/3NYJv4M
Green amzn.to/3tmH1UD
Hex Driver Set:
amzn.to/3Qk6CIN
Torch Supplies for Finishing
Gas amzn.to/3Gkm580
Torch Head amzn.to/3PV9ZFB
amzn.to/3C4b1Jr

[@dannybrant6758]

Great workmanship. Not sure I could put with it, but you given it a new lease of life

[@igolf906]

Thanks. I'm a night & day better putter with face balanced so, it was a must for me.

[@joetorres4165]

Beautiful workmanship

[@igolf906]

Thanks!

[@beveridge1313]

Wow! super clean and nice work! hope you putt straight with it!

[@Haydenwoodify]

Awesome video! WD-40 isn’t lube, use something like triflow or 3-in-1.

[@igolf906]

Thanks! As there are many better options, lol, I just grabbed what I had at the time. WD can actually be used as a cutting oil, but aluminum is what it works best on. Better than nothing I guess!

[@stewboyslabs1578]

Awesome! What sandpaper did you use to refinish the face to give it the clean brushed looked? Turned out awesome and I think a cleaner look than the typical milled face everyone wants these days

[@igolf906]

Thanks! I prefer a smooth face for all of my putters. But I started with 60 grit to get the milling out, then worked my way to 400 for the finish.

[@adamdillman486]

awesome job once again 👏! big fan of your work and videos! keep em coming, you give me alot of ideas for my own customizations 😊

[@igolf906]

Thank you!

[@jamieweaver526]

Just Beautiful. What media do you use to sandblast this? 180 grit glass?

[@igolf906]

240 grit glass. Links in the description.

[@Pluhar71]

Love this, great work and love your videos!! Can you leave a link for the blue material you put on the screws for when you put them back in the baseplate?

[@igolf906]

Thanks! amzn.to/4cw5qvE

[@FlagstickPutters]

Awesome work! How did you know how long to make the hosel?

[@igolf906]

To be honest, I did a lot of basic measurements. Measure the hosel length and depth of the fitting. After a mock up fitting, I use a shaft to follow where approximately the hosel would be, and made sure it ended up pointing directly to the center of the face. Seemed to work as it's perfectly face balanced!

[@glenock766]

Great job on it. Looks magnificent. Yeah by having the shaft point to the center of the face essentially makes a face balanced putter.
Was the initial bore perpendicular? Looked like when you milled it that it was but after installing the neck shaft it looks like it’s a bit angled

[@rdalmasso7326]

Question, with that type on “inserted” neck you can’t adjust lie and loft afterwards right ? Need to perforate at a specific angle at the beginning i guess ?!

[@igolf906]

It would be adjusted just as any other putter. It would probably be much easier with this style hosel.

[@PoliticPete]

Do you need to add a rust protectant after buffing and sand blasting the putter? If yes, what do you use?

[@igolf906]

No, not on a stainless putter.

[@PoliticPete]

@@igolf906 I have a crown and cameron Newport that I need to put on the buffer wheel. Was nervous I’d ruin it by not protecting it but it’s stainless so I’ll give it a go!

[@daniel80111]

Is it easier to add a knuckle neck on a double bend putter? Thinking of possibly converting my putter

[@igolf906]

Depends I guess. A lot of double bends are angled out of the head. So doing this type of conversion wouldn't work.

[@timking4432]

I have an old odyssey white steel #3 blade that i purchased second hand that has some dents and dings and was wandering if you do work for others? Would like to see it restored but i dont have the equipment

[@igolf906]

I do. Shoot me an email with some pics and details.

[@timking4432]

@@igolf906 what is your email?

[@timking4432]

How do I go about doing so?

[@caseykeyser8903]

I’d love to see what this looks like straight down at address.

[@igolf906]

Check my community posts. Just posted pics!