I have a hi capa question. I'm leaving it hear because it regards to the maple leaf hopup chamber. I have a wetech baby capa, also a wetech split slide and a kjw 5.1. They all pull hard to the left, even my new baby capa. When I look at the hop chamber and arm I looks like it pulls down to one side, the side the wheel is on, so obviously its the design of the arm and wheel. My question is this, will the maple leaf chamber fix this issue? Thanks and great videos. Please make some about a tm m&p. I have one amd its broken. I need to get it fixed. Would this be something you would be interested in?
I own two KP-05 by KJ works. I notice my older model doesn't have a notch in the hop up unit. The new model does (almost two year difference in buying them). Both original barrels have notches in them, and the new hop up fits the barrel better. I had to file that notch out to fit my madbull TBB better in the hop up unit, it created a gap in the hop up unit.. The stock HOP UP unit has a prong in it that supports the recoil spring guide.. The "HI CAPA hop up unit for TM/WE" will not fit in a KP05. Only MEU 1911 hop up units the KP05, the difference is that prong at the bottom of the hop up unit where the spring guide rests. I have an ZCI "TM hi capa hop up unit" that couldn't fit because there was no support for the recoil guide. It's not a 100% marui clone, just something I thought I share because I am frustrated I have wasted money on parts that wont work, like my type i and type ii sights that never fit my KP05.
hi mate, i’ve noticed in other videos the crazy jet barrel 97mm looks bigger than the standard barrel in the glock18c im using, ive bought an ungraded 190mm long barrel with a mock silencer, is the maple leaf hop up you’re using suitable for my barrel? as the crazy jet gbb barrel looks a lot thicker, if not have you got any recommendations for a hop up, for a WE g18c gen 3? would be great if you could help me sort this as the stock hop up unit is non effective
I had my TH-cam account for YEARS now and you're the first person I've every subscribe too. I really liked your Glock 18c video and I'm thinking about getting one but I need to know the best parts to buy and where can I get it for a good price
check out my basic upgrade guide for the glocks, that should help you. finding one is going to be hard, check evike and echigoya maybe or extremetronics
Dont know how the c.j barrel works , but it works . You need more psi because you loose fps with a c.j but dear god i shot a 330 through a rifle and it shot better then my lapped r hopped pdi 395 at same fps . I am highly impressed with them . I also haveq one in one of my high capas with the kit you showed here . It is out shooting my 6.01 pdi and a.s.m.p hop up with lower fps .
Hello nice videos that you have got. Does this hop up chamber improves the range of the pistol? I have a glock 17 and the hop up effect it's none... I am thinking in to buy this hop up chamber but have my doubts if it works or its my gun that is sh*t.
Nice vids dude.. Question ..i put a maple leaf hopup unit in my WE tech hi-capa thats sold with a 109 mm inner and now the inner drops in the outer and gets stuck. Ar the specs a little diffrend ? and do i fix it with the 113 maple leaf innerbarrel ?
Heya man, thanks for making the videos. Makes me feel a little more confident taking apart and rebuilding some of my own pistols! Im curious to hear how the pistol works with that ported barrel. Do you expect any improvement in accuracy with it? Keep up the good work man!
Hey Knuckles, I recently came across a HiCapa magazine that was marketed as light weight and better overall performance than traditional mags. ProWin Hicapa Magazine. Do you happen to have one and know the exact weight difference between the Prowin and traditional mags? yeah i know, im a weakass panzee for needing light weight mags
i own a bunch of them, and you aint weak its all good, i prefer light mags myself. they are a pain in the ass with bbs, they get jammed alot if it isnt high quality. i have avideo on them that you can check out
Hey man, quick question: I have a KJW G23, but I can not find a barrel for it. Do you know what barrels will fit? And is the hop up proprietary? Keep up the great vids...
can't help on that im sorry, havent worked on a kjw in years, if you got anyone local to you, compare to a we, if they have same grooves you can probably use a Maple Leaf barrel
I have the 60 decepticon in my hi capa and its too soft! performance was nice but its being destroyed by the loading nozzle (splitting in two). Compression is still good because of the anti blow by ring but it will probably lose its integrity after another couple hundred rounds.
Should the nozzle really impact the bucking? Saw somewhere else someone having problems with bucking being damaged and it turned out to be the nozzle having a slightly burred top, some polishing to remove the excess material sorted the problem. Maybe not what's happening here, but still a thought to check?
Love your vids dude, you inspired me to finally build up my hi capa into what I wanted and followed your Vids for it. Thanks for the vida
thanks bud, hope you enjoy the process!
maple leaf hop up chamber set very useful to me...than my stock one.
I have a hi capa question. I'm leaving it hear because it regards to the maple leaf hopup chamber. I have a wetech baby capa, also a wetech split slide and a kjw 5.1. They all pull hard to the left, even my new baby capa. When I look at the hop chamber and arm I looks like it pulls down to one side, the side the wheel is on, so obviously its the design of the arm and wheel. My question is this, will the maple leaf chamber fix this issue? Thanks and great videos. Please make some about a tm m&p. I have one amd its broken. I need to get it fixed. Would this be something you would be interested in?
I own two KP-05 by KJ works. I notice my older model doesn't have a notch in the hop up unit. The new model does (almost two year difference in buying them). Both original barrels have notches in them, and the new hop up fits the barrel better. I had to file that notch out to fit my madbull TBB better in the hop up unit, it created a gap in the hop up unit..
The stock HOP UP unit has a prong in it that supports the recoil spring guide.. The "HI CAPA hop up unit for TM/WE" will not fit in a KP05. Only MEU 1911 hop up units the KP05, the difference is that prong at the bottom of the hop up unit where the spring guide rests. I have an ZCI "TM hi capa hop up unit" that couldn't fit because there was no support for the recoil guide. It's not a 100% marui clone, just something I thought I share because I am frustrated I have wasted money on parts that wont work, like my type i and type ii sights that never fit my KP05.
drill it, cut off and problem solved =)
so does this actually fit inside of a TM spec glock?
Everywhere that sells it only says WE, which are not the same.
Did you get results for which degrees should be used for Tm? 50?or 70
hi mate, i’ve noticed in other videos the crazy jet barrel 97mm looks bigger than the standard barrel in the glock18c im using, ive bought an ungraded 190mm long barrel with a mock silencer, is the maple leaf hop up you’re using suitable for my barrel? as the crazy jet gbb barrel looks a lot thicker, if not have you got any recommendations for a hop up, for a WE g18c gen 3? would be great if you could help me sort this as the stock hop up unit is non effective
I had my TH-cam account for YEARS now and you're the first person I've every subscribe too. I really liked your Glock 18c video and I'm thinking about getting one but I need to know the best parts to buy and where can I get it for a good price
check out my basic upgrade guide for the glocks, that should help you. finding one is going to be hard, check evike and echigoya maybe or extremetronics
5:23 a barrel insidie a barrel
INCEPTION
Dont know how the c.j barrel works , but it works . You need more psi because you loose fps with a c.j but dear god i shot a 330 through a rifle and it shot better then my lapped r hopped pdi 395 at same fps . I am highly impressed with them . I also haveq one in one of my high capas with the kit you showed here . It is out shooting my 6.01 pdi and a.s.m.p hop up with lower fps .
Can you please tell me how is the "i" key supposed to be installed in the hop up arm? I mean, how is the "curve" supposed to be facing to the bucking?
curve down, it should fit the profile of the bucking
Hello nice videos that you have got. Does this hop up chamber improves the range of the pistol? I have a glock 17 and the hop up effect it's none... I am thinking in to buy this hop up chamber but have my doubts if it works or its my gun that is sh*t.
Nice vids dude.. Question ..i put a maple leaf hopup unit in my WE tech hi-capa thats sold with a 109 mm inner and now the inner drops in the outer and gets stuck. Ar the specs a little diffrend ? and do i fix it with the 113 maple leaf innerbarrel ?
check the position of the outer barrel with stock hopup vs maple leaf see if it changes, if it did then you know what you have to adjust
Heya man, thanks for making the videos. Makes me feel a little more confident taking apart and rebuilding some of my own pistols!
Im curious to hear how the pistol works with that ported barrel. Do you expect any improvement in accuracy with it?
Keep up the good work man!
Gotta test it out, i was dumb and brought a stock tm g17 which ended up light striking the whole day...
KnucklesGSM Hehe! I think eveyone has been there at some point!
KnucklesGSM Hehe! I think eveyone has been there at some point!
Hey Knuckles, I recently came across a HiCapa magazine that was marketed as light weight and better overall performance than traditional mags. ProWin Hicapa Magazine. Do you happen to have one and know the exact weight difference between the Prowin and traditional mags? yeah i know, im a weakass panzee for needing light weight mags
i own a bunch of them, and you aint weak its all good, i prefer light mags myself. they are a pain in the ass with bbs, they get jammed alot if it isnt high quality. i have avideo on them that you can check out
Hey man, quick question: I have a KJW G23, but I can not find a barrel for it. Do you know what barrels will fit? And is the hop up proprietary? Keep up the great vids...
can't help on that im sorry, havent worked on a kjw in years, if you got anyone local to you, compare to a we, if they have same grooves you can probably use a Maple Leaf barrel
Which weight of bbs suitable for this set u bough ??
.28s
Thank dude!
Which bb's will you be using on the field?
extremetronics .30s pink
Pink is better visible then white?
Do you think it would fit on the colt 1911 railgun?
doubt it
KnucklesGSM Thanks
is the 113 mm inner barrel for the hi capa 5.1?
yes
@@KnucklesGSM hi knucks! I bought the B&W glock17, it's a spec of the marui g17. Do you think it would be compatible with the maple leaf too?
Very interested in the results... thinking of getting a 6".
It overhops .30g like crazy no doubt
Hi knuckles, for the airsoft masterpiece project, what are the mag base plates? +knucklesgsm
no clue which one you are talking about
I also ordered the jet set for my G17, and it did come with the wheel. So It's weird it did not with you.
dang..dont know why no wheel here lol
Any word on the results? I'd love to hear how this setup turned out!
posted, but gonna do a new one soon for accuracy
I have the 60 decepticon in my hi capa and its too soft! performance was nice but its being destroyed by the loading nozzle (splitting in two). Compression is still good because of the anti blow by ring but it will probably lose its integrity after another couple hundred rounds.
I see, thanks for the heads up, its good i bought the 70s then haha...
Should the nozzle really impact the bucking? Saw somewhere else someone having problems with bucking being damaged and it turned out to be the nozzle having a slightly burred top, some polishing to remove the excess material sorted the problem. Maybe not what's happening here, but still a thought to check?
do the I-key fit in the stock hop up chamber arm
good job you didn't even show how to install the actual I key
its pretty straight forward but seeing that you can't figure it out, i will make a video for you guys.