И мелканы)), один из моих экземпляров даже в ментовке на стенде красовался, я их как пирожки точил. Напильник и ручная дрель... таких наверное и не выпускают сейчас. Вот это были ощущения!
вал вторичный от Иж юпитер 3 где шток сцепления ходит как раз под строй патрон 6.8 трубка пружина боёк в качестве заряда картечь 7 ка с пыжом доску 5-ку на 25 метров на вылет шило .и никакой мелкашки не надо .это ещё в прошлом веке таким занимался .переделал их и под 6.8 и под 5.6 кучу .самый первый был трубка от салидольника шприца как раз 5.6 и толстая не дуло её усиливал впрессовывал в трубку от кондырей кроватных сваркой 2-3 точки с обоих концов и стволик хоть и гладкий но белку добывал и чушку дома валил на ура .были бы руки и голова сделать можно из говна конфетку. прошлое не забывается как говорится . завязал с ним да и ни к чему теперь . срок ловить не охота .
@@krestinoliki1836 внучёк, сейчас я тебе расскажу, как мы в 70-е с помощью ножовки по металу, напильника, пилы по дереву и ножа, в разы лучше делали пистоль именно под 22 lr, а не под пистон как у тебя. Шли на шахтный двор и с гидростойки отпиливали цельнотянутую трубку высокого давления с толщиной стенок около 3 мм и внутренним диаметром 6 мм чуть прослабленный под мелкашечную гильзу, стреляные гильзы собирали на ДОСААФовском стрельбище, пробивали по середине шляпки гильзы цыганской иглой отверстие и клеили бумажный пистон, в гильзу если не могли достать порох, чистили серу со спичек, пыжевали, и вкладывали или дробину, или шарик с подшипника по диаметру. А сам пистолет вырезался из дерева, у меня была возможность, был из текстолита, крепился ствол и шпингалет подпружинивался, или резинкой с бинт резины, или подбиралась пружина. Дальше, кто большим пальцем поднимал ручку шпингалета и засов бил по пистону на патроне, у кого руки не с жопы, те делали УСМ. А своё одоробло выкрась и выбрось.
It's a bit strange design as normally, you want a rather long-ish barrel and proportionally small striker. This pistol has a tiny barrel but a _huge_, rifle-like striker...
yeah absolutely. bc is gonna suffer like crazy with the barrel so short. should have made the barrel longer and moved the chamber and action back in order to keep the same oal. he has the tools to do it much better. probably just the simplest thing he came up with at the time. 1st or 2nd prototype. but it woks ok.
If my neighbors have all that equipment here in the Philippines , they can make a full automatic M4 or M16, but in your case you made a single shot 22 pistol. Why?
Making barrels dude and uppers is another ball game. Plus I’m pretty sure this vid was made to show how easy some things are to make, plus it’s his own design he came up with, to make M16s and M4 clones would take a lot of skill and year of perfection and schooling
Sadly the m4 and m16 etc. are being bought and used by terror groups and criminal organization here in the Philippines you can see it in news everyday, one example is the 2016 marawi siege mostly all the guns used by the terror are backyard made.
I am clenching my teeth watch him grindstone with gloves, hand close to lathe jaws, leaning over lathe to with emery paper, leaving chuck key in you a brave man
This gentleman is a former professional gunsmith or a turner of the best around with knowledge and extreme preparation, look at his equipment even if you succeed he would most likely make your hands or face explode with serious injuries up to death, he is a genius
В детстве быстрей собирал ружбайку. Кусок доски, трубка под патрон от мелкашки, шпингалет и резинка. При определенном затачивание шпингалета гильза вылетала автоматически после выстрела 😂. Однажды друг её поймал грудью, крови было много. Врали как могли чтобы родители не узнали 😂😂😂
А у нас у одного мелкан осечку раз 100 дал, он решил перед девчонками красануться, к виску поднёс... и зарыли. Да ули там, я сам дружбану ради прикола меж глаз целился, а он, типа: - да давай мне пох.. а у меня крючок через пружину перескочил с щелчком, я чуть и не обделался). До сих по вспоминаю и шерсть дыбом встаёт. Я их тогда ка семачки, в неделю по 5 штук точил)
I am a new subscriber. I am very impressed with your abilities. I can't wait to see all of your videos. Thank you for taking us on your adventure through mechanical engineering. Hello, for Detroit, Michigan USA.
Open bolt restriction probably only applies in the USA. Given that it's a single shot pistol it probably would not apply even then. Now, if he added a magazine, he'd have a machine gun. Which would be a totally different kettle of fish.
I wish that you would have shown what exactly is in the barrel. Is it a firecracker with a fuse, is a fusless charge, is it black powder, is there a projectile? If there is a projectile, what is it? Is it a pellet, a ball, etc.? Is there a wad? I have so many questions.
@@FrustratedBaboon there's another version of this that's common. The barrel unscrews and it has 2 barrels. 1 like he's got. The other one uses rim fire cartridges and instead of the giant handle on the side it's got a big ring on the back like a nerf gun
@@ВасяВодовозов-п9й не совсем. Многие детали они заказывали у знакомых на разных заводах. Многие детали напильником и зубилом на колене сделать просто невозможно.
Lets see your content..... Oh, you got nothing but words. Get a grip boy. You just go around to content creators and talk smack?? Is that what moves you? Is that fulfilling and edifying in your small (boys) world?? Meanwhile, this MAN is down in the shop, getting his hands dirty, testing new materials in cap gun manufacturing, (bondo) Using his mind, this MAN has planned and gave us a demonstration of HIS design. He spends his time USING his tools, gaining insight and practices his trade.. He doesn't ask us for one single thing, does he? He just puts his work out there for anybody to watch. I would say he gains by doing this, that he really LEARNS SOMETHING by doing this.... (You, not so much, boy) Not to mention... He started his youtube channel, he recorded and edited vid... uploaded it, etc what did you do boy??
Spectacular job Brother thank you for sharing your knowledge and expertise and for taking us on your adventures through Mechanical engineering Side note bondo, you can put lipstick on a pig. You still have a pig, but damn that is a sexy pig.😂😂😂
can you do one chambered in 357mag & a barrel with just enough length to allow one of the best cartridges ever made a legit chance to shine in at least some of its very impressive history & glory? Cause your work is also very impressive indeed!
Good vid man. New sub here. Great idea using the bondo! That gives me several ideas for different projects im doing.... I never thought of using bondo!! Also, the smack talkers in the comment section are JEALOUS LOSERS. Please dont pay them any mind... They shit post all over youtube, cause they dont have the talent or skill to become content creators like you have done ... Theyre little boys, and sometimes they act like total bullies.. Screw em'! Ignore em'!
Can you make an over-engineered nerf gun? Specifically, there is a Nerf gun that is similar to this, called the Rifling Swin. It's almost functionally the same as this, with some minor differences.
So many stupid comments from people who don't get the point of video. Author could easily add a magwell and chamber the barrel in .22 or .380 but it would be illegal af, so he had to make it in this way. Very nice metal working and finish actually
I could be wrong, but I think open bolt guns are illegal, because they can be easily converted to machine guns. I see yours is a single shot, but still. . .
В детстве при помощи дрели и напильника такие же игрушки собирал только под строительные патроны и шарики от подшипника)))
И мелканы)), один из моих экземпляров даже в ментовке на стенде красовался, я их как пирожки точил. Напильник и ручная дрель... таких наверное и не выпускают сейчас. Вот это были ощущения!
@@Konstantin_otdelka_remont_SPbтокой вапрос.?ручку с патроном от милкашки зделать сможешь?
@@AarturMai не смогу, станков нету и сидеть не хочу
@@AarturMai мелко плаваеш😂😂😂😂😂
вал вторичный от Иж юпитер 3 где шток сцепления ходит как раз под строй патрон 6.8 трубка пружина боёк в качестве заряда картечь 7 ка с пыжом доску 5-ку на 25 метров на вылет шило .и никакой мелкашки не надо .это ещё в прошлом веке таким занимался .переделал их и под 6.8 и под 5.6 кучу .самый первый был трубка от салидольника шприца как раз 5.6 и толстая не дуло её усиливал впрессовывал в трубку от кондырей кроватных сваркой 2-3 точки с обоих концов и стволик хоть и гладкий но белку добывал и чушку дома валил на ура .были бы руки и голова сделать можно из говна конфетку. прошлое не забывается как говорится . завязал с ним да и ни к чему теперь . срок ловить не охота .
I don't care what anybody says nice work
Трубка, шпингалет, пружинка или резинка на деревяху за пять минут тоже самое делали в детстве
судя по всему, дядя думал о другом, но съехал на пистон))))
эйэй! не раскрывай секрет! у них шпингалеты не производят!
@@Slashire да... шпингалет вещь хорошая, почти готовая)))
Данила бы не одобрил)
Кто знает чем он железо мазал? Какой-то полимер?
Красиво получилось. Как раз на шесть лет тюремного заключения )))))))))))))
Не, по первому разу много не дадут. В России. А в США за это даже административки нет.
с такими мыслями толку от вас никогда не будет.
Это не тянет даже на мои школьные поделки на коленке😂😂😂😂
Мой пистоль пробил доску 40 мм и 15 см стены саманной в сарае
@@yuriyromanchenko285👍👏🤣🤣🤣
Что-бы с пистона стрельнуть, надо было 1,5 кг железа нагородить?
Можно в перед пистона пороха и пулю вальнуть
Будет стрелять
при создании боевого оружия уходит до 5кг металла, так что не плач дед.
@@krestinoliki1836 при чем здесь боевое оружие, к этому одороблу? С дуру можно и фуй сломать, так нужно было видео назвать.
@@alekspog1502 дед иди таблетки попей, он не потратил лишнего металла на самопал под .22 лр.
@@krestinoliki1836 внучёк, сейчас я тебе расскажу, как мы в 70-е с помощью ножовки по металу, напильника, пилы по дереву и ножа, в разы лучше делали пистоль именно под 22 lr, а не под пистон как у тебя. Шли на шахтный двор и с гидростойки отпиливали цельнотянутую трубку высокого давления с толщиной стенок около 3 мм и внутренним диаметром 6 мм чуть прослабленный под мелкашечную гильзу, стреляные гильзы собирали на ДОСААФовском стрельбище, пробивали по середине шляпки гильзы цыганской иглой отверстие и клеили бумажный пистон, в гильзу если не могли достать порох, чистили серу со спичек, пыжевали, и вкладывали или дробину, или шарик с подшипника по диаметру. А сам пистолет вырезался из дерева, у меня была возможность, был из текстолита, крепился ствол и шпингалет подпружинивался, или резинкой с бинт резины, или подбиралась пружина. Дальше, кто большим пальцем поднимал ручку шпингалета и засов бил по пистону на патроне, у кого руки не с жопы, те делали УСМ. А своё одоробло выкрась и выбрось.
It's a bit strange design as normally, you want a rather long-ish barrel and proportionally small striker. This pistol has a tiny barrel but a _huge_, rifle-like striker...
Still cool nonetheless!
yeah absolutely. bc is gonna suffer like crazy with the barrel so short. should have made the barrel longer and moved the chamber and action back in order to keep the same oal. he has the tools to do it much better. probably just the simplest thing he came up with at the time. 1st or 2nd prototype. but it woks ok.
the longer gun barrel gives more precision
and more power or speed of the projectile as it gets pushed longer by the explosive gasses from the gunpowder
ATF: Ya’ll behavin in here? 👨🏻🦱
Nice sharing👍
Thanks for visiting
If my neighbors have all that equipment here in the Philippines , they can make a full automatic M4 or M16, but in your case you made a single shot 22 pistol. Why?
Making barrels dude and uppers is another ball game. Plus I’m pretty sure this vid was made to show how easy some things are to make, plus it’s his own design he came up with, to make M16s and M4 clones would take a lot of skill and year of perfection and schooling
😂
Sadly the m4 and m16 etc. are being bought and used by terror groups and criminal organization here in the Philippines you can see it in news everyday, one example is the 2016 marawi siege mostly all the guns used by the terror are backyard made.
Here in America we have the ATF to worry about, We can't just go on making fully automatic firearms
because he inferior than you
Cool..looks fantastic. Great upload
Another quality production by the ATF !
Shhh the nsa might be watching
1st class quality😀😀😀
ต้องการสิ่งนี้@@miguelcastaneda7257
I am clenching my teeth watch him grindstone with gloves, hand close to lathe jaws, leaning over lathe to with emery paper, leaving chuck key in you a brave man
Excelente video maestro ,y para q calibre es ,x fa
অসাধারণ গল্প। গল্প পড়েতে পড়তে চোখে জল ধরে রাখতে পারলাম না। ধন্যবাদ।
This gentleman is a former professional gunsmith or a turner of the best around with knowledge and extreme preparation, look at his equipment even if you succeed he would most likely make your hands or face explode with serious injuries up to death, he is a genius
Very nice. 1 more step and you could Have had a blow back
No. Not possible.
Bro I Love The Trigger of this gun Loved It. Make Project Like This Man This Is Soooo GOOD
That’s really cool it shows how simple it is it’s just a pipe with a closed end, essentially!
el gatillo esta muy sensible ..ajusta eso que es muy peligroso!!
В детстве быстрей собирал ружбайку. Кусок доски, трубка под патрон от мелкашки, шпингалет и резинка. При определенном затачивание шпингалета гильза вылетала автоматически после выстрела 😂. Однажды друг её поймал грудью, крови было много. Врали как могли чтобы родители не узнали 😂😂😂
А у нас у одного мелкан осечку раз 100 дал, он решил перед девчонками красануться, к виску поднёс... и зарыли. Да ули там, я сам дружбану ради прикола меж глаз целился, а он, типа: - да давай мне пох.. а у меня крючок через пружину перескочил с щелчком, я чуть и не обделался). До сих по вспоминаю и шерсть дыбом встаёт. Я их тогда ка семачки, в неделю по 5 штук точил)
I am a new subscriber. I am very impressed with your abilities. I can't wait to see all of your videos. Thank you for taking us on your adventure through mechanical engineering. Hello, for Detroit, Michigan USA.
Это же детская игрушка получилась, пистонами стреляет. Красные пистоны в концилярских Максим магазинах продается.
За эту игрушку любой следак статью сразу сконструирует.
Not illegal if it is a muzzleloading pistol. If Cartridge rimfire or centerfire itwould be considered illegal.
Are you speaking for all countries in the world??? TH-cam videos aint just watched by americans you know!!!
Short barreled low velosity. Nice if that is all you can get . Illegal if fired from open bolt.
Open bolt restriction probably only applies in the USA. Given that it's a single shot pistol it probably would not apply even then. Now, if he added a magazine, he'd have a machine gun. Which would be a totally different kettle of fish.
I wish that you would have shown what exactly is in the barrel. Is it a firecracker with a fuse, is a fusless charge, is it black powder, is there a projectile? If there is a projectile, what is it? Is it a pellet, a ball, etc.? Is there a wad? I have so many questions.
Im pretty sure, with a little bit change, it can fire for real.
دیدنش خالی از لطف نبود❤ممنون از شما ،بسیار لازم میشود برای کسی که سلیقه وابتکار داشته باشد ❤
Nice work but, its disappointing that the live ammunition is just a clickbait
What ammunition? What are you speaking about?
Reinvent the inline muzzleloader into a pistol is what you have done
No, he invented his own design.
@@FrustratedBaboon there's another version of this that's common. The barrel unscrews and it has 2 barrels. 1 like he's got. The other one uses rim fire cartridges and instead of the giant handle on the side it's got a big ring on the back like a nerf gun
Nice work but good luck taking it apart if ever needed 😅
А?в верх как стрелять?кто патрон будет держать?
Good work I am a fan keep it up may I ask what lathe are you using and where can I purchase one thanks for sharing
The guns looks so nice.
Excelente idea 💡💡💡
Подготовка к звездным войнам . Аборигены межгалактические будут в шоке от неизвестной им развитой цивилизации .
Имея такое оборудование, можно делать многозарядное оружие с намного более лучшим дизайном.
Толстопятовы делали автоматы на коленке напильниками , зубилами, и молотками.
@@ВасяВодовозов-п9й не совсем. Многие детали они заказывали у знакомых на разных заводах. Многие детали напильником и зубилом на колене сделать просто невозможно.
Notice : Do not try this at home. You don't have the tools.
Excelente trabajo
Yeah, real genius wire wheel polishing the square stock handle before you weld it to the gun might’ve been a good idea
Lets see your content.....
Oh, you got nothing but words.
Get a grip boy.
You just go around to content creators and talk smack?? Is that what moves you? Is that fulfilling and edifying in your small (boys) world??
Meanwhile, this MAN is down in the shop, getting his hands dirty, testing new materials in cap gun manufacturing, (bondo)
Using his mind, this MAN has planned and gave us a demonstration of HIS design.
He spends his time USING his tools, gaining insight and practices his trade..
He doesn't ask us for one single thing, does he?
He just puts his work out there for anybody to watch.
I would say he gains by doing this, that he really LEARNS SOMETHING by doing this....
(You, not so much, boy)
Not to mention... He started his youtube channel, he recorded and edited vid... uploaded it, etc
what did you do boy??
Quite good work on the details of the not real - firecracker object. Bravo!
такой большой затвор и такой маленький по длине ствол говорит о точности стрельбы)
Need you to make inward parts to Sabata's gun
Hello 🤩 thanks for your video 🤠... what is it for steel please?
😂😂bro don’t create this at home. It’ll explode on u prolly nd ur gna go jail
@@DonAl_Capone off course 😉 it's just for now...I like steel and the different steel..... that's why I want to now, but thanks for your answer ❤️👍😘
Very best and simple I love it
I need one like this for starting the athletic race, ( starter gun)
I didn’t search this up atf I accidentally clicked the vid
Awesome 👌
Spectacular job Brother thank you for sharing your knowledge and expertise and for taking us on your adventures through Mechanical engineering Side note bondo, you can put lipstick on a pig. You still have a pig, but damn that is a sexy pig.😂😂😂
can you do one chambered in 357mag & a barrel with just enough length to allow one of the best cartridges ever made a legit chance to shine in at least some of its very impressive history & glory? Cause your work is also very impressive indeed!
Design is awesome!
Hi very good
My man got the Harbor Freight starter kit
No tienes uno de estos a la venta o los planos
Reduce firing system because ring cap doesn’t require a lot of force and increase barrel length to 4 inches now you have a powerful muzzleloader
Very interesting, thank you! What kind of percussion caps are these? They look like the ones in toy guns.
it is.
Good vid man.
New sub here.
Great idea using the bondo!
That gives me several ideas for different projects im doing....
I never thought of using bondo!!
Also, the smack talkers in the comment section are JEALOUS LOSERS.
Please dont pay them any mind...
They shit post all over youtube, cause they dont have the talent or skill to become content creators like you have done ...
Theyre little boys, and sometimes they act like total bullies.. Screw em'!
Ignore em'!
Hello dear friend I can only watch you build it ,i can't build it me can hardly catch the styles 😊
I wonder if you could put the firing pin on the pull back and a 22 bullet in the end instead to shoot 4real
you 100% “cannot” as it’s illegal and no one can stop you
Я тоже в школе делал себе трубку - харкалку! Плевалась жеванной бумагой!
How to get 5 with the section 5. Take it from one who knows, read that disclaimer at the start very carefully!
При столь огромных размерах совершенно маленький ствол. Все должно быть наоборот.
are you using bench lathe?
我好想买一套这些工具，放自己的屋子里，玩一年都不腻！
How do I get the project, technical drawing

This is indeed very interesting
This is way too much effort for a gun like this.
Para cal 22, queda. Excelente.
ст.222 и 223 ук рф. п.с. не проще ли лицензию взять и купить легальное оружие?
Bondo?and primer? This is so dangerous. I think the only thing reliable about this 'firearm' is that you can rely on it not being reliable, or safe
It shoot projectile, it acomplishes its intented desigh its a good work, better than having nothing
con una impresora 3d y esa mano de obra , podrías sacar tu propia marca 🤘
Can u make a video firing the gun at a target
Can you make an over-engineered nerf gun?
Specifically, there is a Nerf gun that is similar to this, called the Rifling Swin. It's almost functionally the same as this, with some minor differences.
Puedes compartir medidas o instrucciones para fabricar una porfavor
Toller Film kann man bestellen?
Is this inertial occlusion?
Untuk ukuran besi primer berapa mili?
It's beautiful
情報公開ありがとうございます❤
助かりました💦
Why are use filler when you could’ve just made a nice wood handle all the way up and over the trigger
Do you speak English too?
Cause he didn't want to..
How bout that?
Make a gun and give us some of this great content that only exists in your lame-brain...
Very Nice Gun
So many stupid comments from people who don't get the point of video. Author could easily add a magwell and chamber the barrel in .22 or .380 but it would be illegal af, so he had to make it in this way.
Very nice metal working and finish actually
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
Can i buy thi weapon?
beautiful and interesting gun???)))
why show the bullet in the intro picture?? and bondo used? really
How to buy this product sir tell me
в детстве за полдня делали пистолет под мелкашку, две трубки, шпингалет, пружина, деревянная рукоятка, да инструменты
Ээээт точно!
The thickness is good for making sniper
Es un Matagatos, cuando era chico hice como 10
never new someone could be so bad at spray painting
i have the vice and circular grinder. 😂
Good i like it
Hey can you make me one😂
Heavy metal..y not use polymer..for advance revh na now ..
I could be wrong, but I think open bolt guns are illegal, because they can be easily converted to machine guns. I see yours is a single shot, but still. . .
😂😈
Looked like a cap gun... Or black powder cap and ball
@@ephenseyst in fact, actually it's 😁😈
disegner ttecnical ????
How to avail and how much
Very good
Thanks
Good 😮
I wouldn't bondo i think the natural steel is pertier
O CARO É BOM NO Q FAZ ! ❤