Thank you for posting. Very helpful. This is the correct way to do this so that you may use full-sized tools. I chose to go through the change cup/mirror control. A very tight work area and you must use small tools. I adjusted the brake in 15 minutes, but then dropped the tiny wrench and it fell down into an impossible location. Took an hour to get it out. So, pick your poison on which way to do this.
Great video, thanks for posting this! I followed your video and was able to adjust my cable tension which was way too loose after replacing the brake shoes and hardware.
Thank you for the video. This was very helpful. I was able to adjust mine but my issue is that even with the lever down the parking brake seems to stay on and the rear brakes stick just a little. The vehicle doesn't roll in neutral and after a test drive the rear rotors are hotter than the front ones. Any idea on how to get it to completely disengage?
Many thanks for the video, mine is a RAV4 2008 and the cable is different, I could adjust per hand(!) but I am not so sure, is it all I have to do? No other adjustment on the rear wheel or so?
I did it; so easy. Saved me a trip to the mechanic. (I was using it as an excuse to not change my own oil, but it was so easy, I changed my oil right after)! Yay.....two things checked off my list!
My rear brakes squeak all the time when driving. The rear brake drums and shoes were replaced by a previous owner not too long ago. I took the car to a mechanic who cleaned the drake drums and rear brake pads with cleaner and lightly sanded both the drum and pads. Unfortunately with some driving, it appears that the brakes heat up with use and the squeaking is louder. I have noticed that the hand brake lever is very tight to pull up. Could it be that when the new brakes were installed on the rear that the park brake cable is now too tight for the new rear brake brims and causing it to drag and heat up? I really enjoy your videos. Thanks for providing them.
It is possible to over-tighten the shoes to the point that the tires will smoke on a long trip. Check the temperature of your rotors after a trip. The front rotors should be hotter than the rear when the brakes are working correctly. Don't use your fingers or you might burn them. Laser pointer thermometers work best.
I just replaced the spring assembly on my 2004 Rav4, and previous to the parts replacement, my parking brake did work fine, but now it doesn't. Do I have to adjust the parking brake from the inside with the cable tension or do I have to re adjust the parking brake with the star wheel between the brake shoes?
![ค้างคืนโรงเก็บกระสวยอวกาศร้างกลางทะเลทราย [Around The World Ep. 3]](http://i.ytimg.com/vi/E5bWZQhABJE/mqdefault.jpg)
You can squeeze a small deep socket down the side of the handbrake to adjust it without taking the armrest out.
Ok
Thanks! Had to change the hand brake lever. So your video helped me know how to take off the console cover to get at it.
Excellent!
Thank you for posting. Very helpful. This is the correct way to do this so that you may use full-sized tools. I chose to go through the change cup/mirror control. A very tight work area and you must use small tools.
I adjusted the brake in 15 minutes, but then dropped the tiny wrench and it fell down into an impossible location. Took an hour to get it out. So, pick your poison on which way to do this.
Thanks for comment. 😁👍
Great video, thanks for posting this! I followed your video and was able to adjust my cable tension which was way too loose after replacing the brake shoes and hardware.
Thanks a lot, really helpful! Anyone can do it, I recommend trying it before going to the mechanic, it literrally took me 10minutes.
Thanks
Thank you for the video. This was very helpful. I was able to adjust mine but my issue is that even with the lever down the parking brake seems to stay on and the rear brakes stick just a little. The vehicle doesn't roll in neutral and after a test drive the rear rotors are hotter than the front ones. Any idea on how to get it to completely disengage?
Thanks and noted 👍😀
Many thanks for the video, mine is a RAV4 2008 and the cable is different, I could adjust per hand(!) but I am not so sure, is it all I have to do? No other adjustment on the rear wheel or so?
Also please adjust by rear Brake Shoes adjusting bolt. Look my new video here: th-cam.com/video/XsAUCZ5-gAI/w-d-xo.html
Looks simple enough. I thought I had to crawl under the rear axle to do it, so this makes me very happy!
Thanks for feedback Madam. :-)
I did it; so easy. Saved me a trip to the mechanic. (I was using it as an excuse to not change my own oil, but it was so easy, I changed my oil right after)! Yay.....two things checked off my list!
No need to disable the plastic part from center you can do all with cover on
Thanks. :-)
Awesome video’s. Love your content!
Thanks for comment 👍😀
My rear brakes squeak all the time when driving. The rear brake drums and shoes were replaced by a previous owner not too long ago. I took the car to a mechanic who cleaned the drake drums and rear brake pads with cleaner and lightly sanded both the drum and pads. Unfortunately with some driving, it appears that the brakes heat up with use and the squeaking is louder. I have noticed that the hand brake lever is very tight to pull up. Could it be that when the new brakes were installed on the rear that the park brake cable is now too tight for the new rear brake brims and causing it to drag and heat up? I really enjoy your videos. Thanks for providing them.
It is possible to over-tighten the shoes to the point that the tires will smoke on a long trip. Check the temperature of your rotors after a trip. The front rotors should be hotter than the rear when the brakes are working correctly. Don't use your fingers or you might burn them. Laser pointer thermometers work best.
Did you ever find out what the issue was? Mine is doing the same. Drum brakes squeaking when hot and very irritating.
much easier to just remove the coin tray on the console which gives you easy access to adjust. no need to take your car apart that far. mine is 2011
I have read your post! Good comment. Continue in the same way.👍😀
Thank u so much for nice video
Can you please show us in a video how to replace the cable of the brake parking
How about Rav4 2018 model can you make a video how to open the hand brake cover i dont know how.please its a big help for me.
Hello Jomore. Of course we will do it in future.
Cool thanks ,just adjusted mine all good
Thanks. :-)
Very helpful. Good vi
Worked great! Thanks!
Noted 👍
Thanks a lot! Very useful video and I probably saved a couple of 100€ thx to your video.
Great to hear!
Thank you so much for this video
Thank you so much for video,....that was pretty easy.....you save my life....thank you so much !!!!
Hi and Many Thanks for feedback. :-) Regards Peter
Wrong way to do you must slacken first then adjust shoes then retighten handbrake adjuster
Great video... thank you 4 posting.
Grest video, thanks!!....
Thanks Sir. :-)
Thank you....good job!!
Hi, Thank You for feedback. :-)
I just replaced the spring assembly on my 2004 Rav4, and previous to the parts replacement, my parking brake did work fine, but now it doesn't. Do I have to adjust the parking brake from the inside with the cable tension or do I have to re adjust the parking brake with the star wheel between the brake shoes?
Hi, what was the solution in the end? Similar problem here, thanks
why not use a longer extension Bru
Good idea.
your accent makes me think you're a Finn or Esto
Compare the market dot com
For the same car
Way easier to just change the pads lol
Thanks for comment 👍😀
This is rediculous. Just pull the coin tray and you have access to the nut. Literaly 20 seconds
Noted
A@km
👍