Nothing sacred around here when it comes to progress 🤦🤦🤣🤣🤣 It's really gotten awful Gordon, they just don't care anymore!! Thank you sir for always being here, I really appreciate that!! Hope you do as well Gordon 😁😁👍👍🇺🇸🇺🇸
Thank you Mr Tony, been thinking hard on it for sure, well at least dad has 😁😁 Thank you as well for the kind words and encouragement my friend!! Also for always being here, I really appreciate that!! I hope you do as well sir!! 👍👍👍😁😁😁🙏🙏
Yes sir Mr Joey, that video is coming very soon my friend, complete brake redo!! Thank you sir for always being here, I really appreciate that!! 👍👍👍😁😁😁🇺🇸🇺🇸🇺🇸
Thank you very much Mr Rich!! It has been taxing, but we are making huge steps in the right direction!! Thank you my friend for always being here, I really appreciate that!! 😁😁👍👍🇺🇸🇺🇸🇺🇸 CHEERS my friend!!!
Hey Nelson - nice job on the clean up of your pieces. Over the years I packed probably hundreds of bearings the way you did, but last year I bought a very inexpensive 2-piece tool that you put the bearing inside of, and then you can use a grease gun to force grease into the bearing. Works pretty well and is a lot less messy. Looking forward to seeing the rest of your repair. Now's the time to get it done, vs. when you're needing to use the tractor. 👍👍👍👍👍
Thank you Mr Charlie, that old diesel fuel did the trick!! I have as well sir, never had a problem just like you!! I have been debating one of those tools you speak of, and may just get.ine with alot more bearings prone to go out with farming now!! Thank you sir for the input on the video, several more coming soon!! Amen to that!! Hope to have it ready for sure by spring!! Thank you sir for always being here, I really appreciate that!! 👍👍👍🇺🇸🇺🇸😁😁😁
Hand packed for years. Bought one for those things, probably 30 years ago.. it's ok if you are doing a dozen at a time. Anymore, I use a 14ga needle with a grease zerk on it. It's fast, clean and no wasted grease.
@@AnglesideFarm I started using one about 2 years ago. Saw another guy on TH-cam using one. Bought one and have been using it ever since. They work pretty well, in my opinion.
The diesel fuel in the kiddy pool gave me bad flashbacks to flushing a final drive on the trackhoe out in the field with a 2-and-a-half-gallon jug of diesel. Got to love the quality control these days. It sucks to get stopped on a project because a new part isn't right.
Boy I was thankful not was a planned repair 🤦🤦🤣🤣 I bet that does cause flashbacks!! It's so ridiculous how bad things have gotten honestly, I was so mad!! Those nuts were way over my pennies on the dollar budget at 25 bucks each 🤦🤦🤦 Thank you sir for always being here, I really appreciate that!! 🇺🇸🇺🇸🇺🇸🇺🇸😁😁😁👍👍
Packed bearings like that when I was 19 stationed in Korea. Never had a problem. Understand brother…..do what works and forget about the negative coms. Bless you
Well sir thank you for what you did, first and for most!! And second thank you for the support, I have as well myself for years!! Never seemed to be an issue so far 😁😁 I really appreciate your insight and encouragement my friend, and for being here!! I really appreciate that!! 👍👍👍👍😁😁😁😁
I did get a little chin music, for using the pool from my wife...but it worked perfectly 🤣🤣🤣🤣😆😆😆🤦🤦🤦 Gosh that it is, seems always a specific tool is needed each time!! Thank you my friend for always being here, I really appreciate that!! 🇺🇸🇺🇸🇺🇸😁😁👍👍👍
Great job my friend, like every second of the video, hope you get the right nut fast, the way you pack the bearing is 100%, looking forward to more videos
Thank you Mr Jan for the kind words!! They refunded my money nicely, and we just touched up the old ones!! Thank you as well for the support on the bearing packing!!! I do have several coming up Mr Jan, thank you sir for that and always being here, I really appreciate that!! 😁😁😁👍👍👍
I agree with the other comments. You have it torn down so slap the paint on her now. 30 minutes wouldn’t be too long for your videos. You have great content so they are never boring. Love the pennies on the dollar parts cleaner btw.
That's exactly what dad has been saying too🤦 I have drifted away from shine in my later years, but I must say a fresh coat of blue would look amazing 😁😁 Thank you Carl for that about the videos, I may try one and see how bad it flops🤦 I have a second on the repairs started so I might just keep adding material and see how it goes 🙏🙏 Thank you for the insight, I really appreciate that sir!! Nothing is sacred around the farm, actually was perfect for washing them!! Looks like I would have put it on a stand or something though, tuff on the knees 🤦🤦🤦🤦 Thank you sir for always being here, I really appreciate that!! Hello to the Mrs as well my friend!! 😁😁😁👍👍👍🇺🇸🇺🇸🇺🇸
We got to get you a wood stove in that shop....all that dry red cedar you shoved in the fence line and a whole kiddy pool full of Boy Scout water= nice heat..... That little Ford sure looks to be in nice shape, just a little maintenice things that need to be done and your Daddy will be styling....Thanks Nelson....
We did have for years Mr Brent, a mama bear stove, still there in the corner🤦 Problem is, when I used it my buddy stayed within 2 ft of it, I would melt...now I can make him work everywhere and drag the heater to that location 🤣🤣🤣🤣🤣🤣🤣🤣 Thank you Mr Brent, it truly is in really good shape, just buttoning up a few odds and ends!! He is loving every bit of it!! 😁😁 THANK you sir for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸👍
Great video Nelson. Great job on the cleaning and the kiddy pools work wonders. Parts boxes are like a Cracker Jacks box, you never know what you are getting in the surprise. Blessings.
Nothing is sacred on the farm 🤦🤦🤣🤣🤣 Even the grandson's kiddie pool 😆😆 You said that right on the parts, you never know anymore!! Thank you my friend for always being here, I really appreciate that!! 😁😁😁👍👍👍👍
We wash parts, and pack bearings the same way. South wind brought us above freezing temperatures,, and rain. I actually caught a whiff of skunk. It will go back into hibernation next week. Thank you Nelson.
Thank you Mr Bryce, seems to work really well😉😉 Wow, that's amazing...you guys have some wild winters for sure!! It was actually 53 that day, but if it's below 70 my buddy needs heat 🤣🤣🤣🤣 We are headed back to 67 two days this week😳🤦 Boy the skunks have been thick this season here!! Thank you Mr Bryce for always being here, I really appreciate that sir!! 👍👍👍😁😁😁🇺🇸🇺🇸
I like the parts washer👍, my wife and kids probably wouldn't think so.😂 Looks like a fun project. Looking forward to seeing the 3000 out in the field.🍻🍻🚜🇺🇲
I did get chin music as well, we had bought it for my grandson, been sitting in my storage area for several years...I get it out to use it, now mysteriously...it was gonna be out little 7lb inside dogs swimming pool 🤦🤦🤣🤣🤣🤣🤣🤦 Well, nothing's sacred on the farm 😁😁😁😉😉 I actually did a video of just random conversations between my dad and I in the shop while working...turned out pretty cool, so enjoying the repairs with him!! I think it will be amazing on the haybine for sure!! 😁 Thank you sir for always being here, I really appreciate that!! 😁😁😁😁👍👍👍🇺🇸🇺🇸🇺🇸🍻🍻
Thank you sir!! I think they will make it right, and we sailing right along with the re-install 😁😁 I can't wait to have a full season of hay making!! Thank you sir for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸👍🙏🙏
Glen says sorry about the sucky parts. Looks like a tricky torque for sure. It is gonna be a great tractor and super handy come haying season. Take care!
Parts actually suck anymore, well the source mainly 🤦 That it is, sure enough took all I had to get the torque for sure!! I do think you are spot on correct, I think I am looking as fwd to it as my dad is 😁😁😁 Thank you both for always being here, I really appreciate that!! 👍👍👍👍😁😁😁😁😁
I tried one of those bearing packing units once. You really have to make an effort to keep dirt out of them. I ended up doing the job the same way you do. God Bless.
I have seen those , and lots have mentioned them...but I would be in the exact boat I think with dirt!! Just something about feeling that grease fill every inch of that bearing, you know it's done right then!! Thank you very much my friend for always being here, I really appreciate that!! 😁😁😁👍👍👍👍
Man, quality control these days is sickening. Hope you can get your money back without too much hassle. I like that parts washer! I'm getting ready to start building one and I look on here and Nelson way outdid me! Story of my life 🤣🤣 You're making good progress my friend! Hope you have a good week Nelson!
That it has Evan, very bad!! They actually did refund, and field scrapped them!! So my buddy will work his machinest magic and have some spares!! Oh my the parts washer....I was like oh my gosh, started to cut a 55 gallon barrel down, them spotted that pool (had almost) forgot about it, and BINGO that was the ticket 🤦🤦🤦🤣🤣🤣🤣🤣😉😉 Nothing sacred around here EVER 😆😆😆 Thank you very much my friend for all the kind words, support and encouragement!! Also for always being here, I really appreciate that!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸
It sure is, got two nuts in....one was fine, one was all jacked up!! That says it all right there!! Thank you my friend for the input, and always being here, I really appreciate that!! 😁😁👍👍👍
Ya just don't realize how much grime and stubborn grease can build up. I've done bearings like you since I was a kid and always worked fine. Look forward to more on the repairs.
My goodness you are so right Mr Mark!! It has really built up with those seals leaking so much!! Thank you for the insight and support on the bearing!! Never had an issue myself either!! Thank you as well for the input on the repair, and always being here!! I really appreciate that!! 😁😁😁👍👍
Nice mechanic stuff Nelson. That's the way to pack a bearing. 👍 We have kiddy pools all over at work to throw under equipment that springs a leak.🤣 It's a sad state of affairs what parts quality has come to. That tractor would be really nice for the haybine. Massive heatwave here. hit 33 degrees today. 😁
Thank you Mr Will, heck yeah...nothing is sacred when it comes to needing a tool for the job 🤣🤣🤣🤣 It has gotten really bad, prices up and quality is way down!! I think that's exactly what it will be on Mr Will!! Be a good fit for it I think!! Heat wave...that's still freeze the jewels for me, but hey....alot better than some of y'all's weather 😳😳 We will hit 68-68 F this week I think!! I really appreciate you always being here Mr Will! 🇺🇸🇺🇸👍👍👍😁😁😁
Hello Mr Sven!! ☕☕☕ These ford's seem to be very opportune to have a vast aftermarket parts availability!! Thank goodness for that!! Thank you sir for always being here, I really appreciate that!! I did actually just today order some parts from the dealership 😁👍
Thank you Ryan!! We are getting there my friend!! I think I forgot to comment, but that short you posted last night was epic spot on!! Thank you for always being here, I really appreciate that!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸
You're right about quality control, I bought a new radiator for my aging M, the new one leaked, so what really ticked me off was when I returned the new leaking one refund no problem but they wouldn't give me the credit for my old copper core, this is why people are side stepping dealers and buying online, good luck
Oh my goodness, that's crazy!! No credit for your core, geez....things have gone south for sure!! Yep you are correct!!! Thank you sir for the encouragement, and always being here!! I really appreciate that!! 😁😁😁👍👍👍
Thank you Murphy, sometimes we use what's available 🤦🤦🤦🤣🤣🤣🤣🤣🤣 Thank you my friend for always being here, I really appreciate that!! Hope things are well, looking fwd to seeing one day!!
It's so crazy, there is always gonna be something for sure!! It's really ashame now a days!! Thank you sir for the kind words and always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸 Hope things are going well Matt!!
Thank you sir, we are getting there!! AMEN to that, sometimes the fab work is easier for sure!! Thank you for the kind words and always being here, I really appreciate that!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸
Oh heck yeah, diesel is great for cleaning stuff. With it already rendered useless by being contaminated its a plus and not nearly as painful. Heck, that's the only way I've ever packed a bearing. They have those pneumatic grease packers...but I've not had the pleasure. The axle nuts must be made of the now common material known as Chinesium.... My parts washer is a 30 gallon drum, on its side, with a home made rack and heavy screen. I put the pick up tube an inch off the bottom to keep the sludge out of the pump and the pump is a 60 or 70 year old oil burner pump. Its the old style Webster (iirc) low pressure oil pump. Not the newer high pressure ones. The discharge goes to the top via a refrigerant hose off my old gauge set for flexibility. What's that you say..?? Pennies on the dollar....?? LOL
Man yeah Mr Wendell!!! Can't beat that old fuel, especially when it was already unusable!! Thank you sir for that support on the bearing!! I have as well always!! BINGO on the issues with metals now a days 😳😳! Man that sounds awesome!! You can come up with some of the best creations!! I bet that pump will last forever!! I have one, I haven't picked up yet🤦🤦 but the pool did work pretty good!! Heck yeah your setup is absy pennies on the dollar 😁😁😁😁😉😉😉 Thank you sir for all your support and always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸🇺🇸
And ol' boy showed me how to pull the water out of oil and fuel by using a old refrigerator Freon compressor. We were out mining on the Southside of Mt. Denali in the 70's did a good enough job to get back out to the real world.
You can look it all up on the CNH parts new holland and there are some changes in just about every year on them so i would definitely make sure you have the proper parts and tools. I had done a 4000 ford a few years ago lol lucky the dealer helped me out with getting it right
I have noticed that exact thing AJ about the suttle differences you speak of!! These nuts were right, but man they left all the thread chasings in the threads, I think I could have kept digging at them, but just said nope...bit for what they cost!! Thank you very much for the insight and advice!! Also for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸
That's a great idea for the parts washer 👌. Amazing how good paint can look when you get all the grease off of it . Quality control sure isn't what it used to be 🤬. Hopefully you'll get the right stuff. I'm curious to see what you came up with for a tool to torque those nuts . Take care catch you on the next one 👍👍🍻🍻🍻🍻🍻
I got a little chin music, but nothing's sacred on the farm 🤣🤣🤣🤦🤦🤦🤦🤦 I couldn't believe my eyes, shined that blue right up!! I guess the grease kept it from fading!!! It is awful in some things, truly is!! Seems pride in work is a word no one cares about anymore 😡 Oh boy...we went round and round over physics (my machinest buddy) and I🤦🤦 I wanted a socket with another welded on the side and use the torque wrench. He said it wouldn't work like I wanted it too, a few examples and test later we got closer to a torque spec with the homemade socket and 4 ft pipe wrench than the way I wanted to do it 🤦🤦🤦🤦 Yep, you know I heard about that the rest of the day 🤣🤣🤣🤣🤣🤣🤣🤣 Thank you sir for always being here, I really appreciate that!! Sure means alot!! 👍👍👍😁😁😁🇺🇸🇺🇸🍻🍻🍻
Anytime my friend!! And thank you very MUCH for the kind words!! I have grown quite fond of this one!! Thank you for always being here, I really appreciate that!! Hope things are well my frozen northern friend!! 😁😁😁👍👍🥶🥶
You know old man.... If you put that parts washer up on a table, or even a trailer... It would be a lot nicer on the back and knees... Always make sure you get the races seated good the first time!! A piece of 1/2" or better, flat iron works great for getting races and seals started.. Quality control 🙄 or.. they changed threads at some point... We've come across that before 🤬
Just yesterday, I had to wash more parts....my buddy stood back and laughed at me, grunting to get back up from trh ground!! 😆😆😆😆 He said almost the exact same thing, and then made fun when he said, now you can't move it with all that diesel fuel in it 🤣🤣🤣🤣🤣😆😆😆😆 I do not like races or seals ,.always afraid I will mess them up!! Usually I have the ace machinest there do most of them, patience and attention to very suttle changes are not my strong point 🤦🤦🤦 It was bad, he brought all of his fancy tools, they are the same but it was like the thread chasings we're all still half attached in the nut. Maybe dull tooling? You could pick some out with a pick, but I figured for what I gave I wasn't doing it!! Those axles aren't cheap if I stripped them out!! I can be a bull in a fine china shop sometimes, and we have already run across some of those small differences you and AJ speak of! Thank goodness for his fancy little tools 😁😁 Thank you Ed for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸
It sure can be, and has been but we prevailed I think!! Over at your place now!! Thank you sir for always being here, I really appreciate that!! 😁😁👍👍🇺🇸🇺🇸
Man, you definitely got the same luck I have. I don't know where you ordered parts from but I have had really good luck with parts from "Stevens tractor company LLC", and know I'm not related to them, but I usually get great service and parts from them.
I was starting to get them all from one place, then this issue and slow shipping!! I will have to check them out, found a place in AL that seems to be working great so far!! Thank you Mr Steve for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸🇺🇸
🤦🤦🤦🤦🤣🤣🤣 I know, just gotta make my tight wad tail go spend the money 🤦🤦🤣🤣🤣 But I think I will look into them, because with farming I see a lot more bearings and races needing replacement!! Thank you Keith for always being here, I really appreciate that!! 😁😁😁🇺🇸🇺🇸👍👍🍻🍻
I wasn't about to chance stripping those fine threads on an expensive axle over bad quality control 😳😳 It really messed that day up, but they refunded without a question and field scrapped the nuts 😉 Thank you Mr Robert for always being here, I really appreciate that sir!! 😁😁😁👍👍👍🇺🇸🇺🇸🇺🇸
I use a lot of gas and diesel to clean parts too. Did you put grease on the bearings so the wouldn't be dry until the oil gets to them or are they supposed to be greased? I did axle seals on a 9n year ago and we just soaked the bearings in oil a nd installed them. Looking forward to seeing the rest of the repairs.
It works so good doesn't it Mr Monty!! Stinks to high heaven's, but sure eats at grease!!! Actually these are greased bearings. That's what makes such a mess on this series. There is a seal on the axle tube in (trumpet) as they call it, that keeps rear end oil in and out of the bearing to leak out. There isn't a seal at the backing plate, just shims (next video) 😁 Then there is a grease seal behind the brake backing plate to keep that grease in on the bearing🤦🤦 It's actually a weird design, it should have been made to all just run in oil, instead of all these seals within inches of each other!! 🤦🤦Thank you sir for the input, I have several videos already, hope y'all don't get bored!! Thank you as well for always being here, I really appreciate that!! Have a great day my friend!! 😁😁😁👍👍🇺🇸🇺🇸
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 6](http://i.ytimg.com/vi/CVUx09Rx0-M/mqdefault.jpg)
Kiddy pool made a good parts washer. Unreal quality control nowadays but you'll get it . Have a good one Nelson
Nothing sacred around here when it comes to progress 🤦🤦🤣🤣🤣 It's really gotten awful Gordon, they just don't care anymore!! Thank you sir for always being here, I really appreciate that!! Hope you do as well Gordon 😁😁👍👍🇺🇸🇺🇸
You might as well paint the whole thing while you got it tore down. Hope everything works out for you Nelson and have a blessed week my friend.
Thank you Mr Tony, been thinking hard on it for sure, well at least dad has 😁😁 Thank you as well for the kind words and encouragement my friend!! Also for always being here, I really appreciate that!! I hope you do as well sir!! 👍👍👍😁😁😁🙏🙏
I agree on the painting Nelson. No better time than now
Tony my thoughts as well, but then again I’ve had a tractor tore down for 2 years waiting on me to paint it, lol!
@@Thomasfarmstn well it’s about time you get started, just think of the additional videos you can make.
Oh my Mr Gary, that's exactly what dad keeps saying too!! 🤦🤦🤦
You gotta roll with what you have! I’ve been packing bearings like that for over 50 years and it hasn’t failed me yet.
Nothing's sacred Mr Matt, that's for sure!! 🤣🤣🤦🤦🤦 Thank you my friend for always being here, I really appreciate that!! 😁😁👍👍🇺🇸🇺🇸👍
Thank you Nelson, I am liking this series. My tractor needs brakes, so hoping to learn something from you.
Yes sir Mr Joey, that video is coming very soon my friend, complete brake redo!! Thank you sir for always being here, I really appreciate that!! 👍👍👍😁😁😁🇺🇸🇺🇸🇺🇸
That is a project I'd never contemplate! Looks like you did OK! Cheers!
Thank you very much Mr Rich!! It has been taxing, but we are making huge steps in the right direction!! Thank you my friend for always being here, I really appreciate that!! 😁😁👍👍🇺🇸🇺🇸🇺🇸 CHEERS my friend!!!
Hey Nelson - nice job on the clean up of your pieces. Over the years I packed probably hundreds of bearings the way you did, but last year I bought a very inexpensive 2-piece tool that you put the bearing inside of, and then you can use a grease gun to force grease into the bearing. Works pretty well and is a lot less messy. Looking forward to seeing the rest of your repair. Now's the time to get it done, vs. when you're needing to use the tractor. 👍👍👍👍👍
Thank you Mr Charlie, that old diesel fuel did the trick!! I have as well sir, never had a problem just like you!! I have been debating one of those tools you speak of, and may just get.ine with alot more bearings prone to go out with farming now!! Thank you sir for the input on the video, several more coming soon!! Amen to that!! Hope to have it ready for sure by spring!! Thank you sir for always being here, I really appreciate that!! 👍👍👍🇺🇸🇺🇸😁😁😁
Hand packed for years. Bought one for those things, probably 30 years ago.. it's ok if you are doing a dozen at a time. Anymore, I use a 14ga needle with a grease zerk on it. It's fast, clean and no wasted grease.
I agree Charlie that style bearing Packer works great.
@@AnglesideFarm I started using one about 2 years ago. Saw another guy on TH-cam using one. Bought one and have been using it ever since. They work pretty well, in my opinion.
The diesel fuel in the kiddy pool gave me bad flashbacks to flushing a final drive on the trackhoe out in the field with a 2-and-a-half-gallon jug of diesel. Got to love the quality control these days. It sucks to get stopped on a project because a new part isn't right.
Boy I was thankful not was a planned repair 🤦🤦🤣🤣 I bet that does cause flashbacks!! It's so ridiculous how bad things have gotten honestly, I was so mad!! Those nuts were way over my pennies on the dollar budget at 25 bucks each 🤦🤦🤦 Thank you sir for always being here, I really appreciate that!! 🇺🇸🇺🇸🇺🇸🇺🇸😁😁😁👍👍
Packed bearings like that when I was 19 stationed in Korea. Never had a problem. Understand brother…..do what works and forget about the negative coms. Bless you
Well sir thank you for what you did, first and for most!! And second thank you for the support, I have as well myself for years!! Never seemed to be an issue so far 😁😁 I really appreciate your insight and encouragement my friend, and for being here!! I really appreciate that!! 👍👍👍👍😁😁😁😁
Great parts washer! I have trouble with bad parts too... Farmer tool making is a must sometimes 😃
I did get a little chin music, for using the pool from my wife...but it worked perfectly 🤣🤣🤣🤣😆😆😆🤦🤦🤦 Gosh that it is, seems always a specific tool is needed each time!! Thank you my friend for always being here, I really appreciate that!! 🇺🇸🇺🇸🇺🇸😁😁👍👍👍
Great job my friend, like every second of the video, hope you get the right nut fast, the way you pack the bearing is 100%, looking forward to more videos
Thank you Mr Jan for the kind words!! They refunded my money nicely, and we just touched up the old ones!! Thank you as well for the support on the bearing packing!!! I do have several coming up Mr Jan, thank you sir for that and always being here, I really appreciate that!! 😁😁😁👍👍👍
It is always fun to find those problems (with the nut) when you start putting something back together
I was SOOO furious, especially since they were 25 bucks a piece!!! Thank you my friend for always being here, I really appreciate that!! 👍👍😁😁🇺🇸🇺🇸🇺🇸
I agree with the other comments. You have it torn down so slap the paint on her now. 30 minutes wouldn’t be too long for your videos. You have great content so they are never boring. Love the pennies on the dollar parts cleaner btw.
That's exactly what dad has been saying too🤦 I have drifted away from shine in my later years, but I must say a fresh coat of blue would look amazing 😁😁 Thank you Carl for that about the videos, I may try one and see how bad it flops🤦 I have a second on the repairs started so I might just keep adding material and see how it goes 🙏🙏 Thank you for the insight, I really appreciate that sir!! Nothing is sacred around the farm, actually was perfect for washing them!! Looks like I would have put it on a stand or something though, tuff on the knees 🤦🤦🤦🤦 Thank you sir for always being here, I really appreciate that!! Hello to the Mrs as well my friend!! 😁😁😁👍👍👍🇺🇸🇺🇸🇺🇸
We got to get you a wood stove in that shop....all that dry red cedar you shoved in the fence line and a whole kiddy pool full of Boy Scout water= nice heat..... That little Ford sure looks to be in nice shape, just a little maintenice things that need to be done and your Daddy will be styling....Thanks Nelson....
We did have for years Mr Brent, a mama bear stove, still there in the corner🤦 Problem is, when I used it my buddy stayed within 2 ft of it, I would melt...now I can make him work everywhere and drag the heater to that location 🤣🤣🤣🤣🤣🤣🤣🤣 Thank you Mr Brent, it truly is in really good shape, just buttoning up a few odds and ends!! He is loving every bit of it!! 😁😁 THANK you sir for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸👍
I'm thinking he needs to build an oil burner.. he's got 20 gallons of some dirty💩 in the parts washer 🤔
Great video Nelson. Great job on the cleaning and the kiddy pools work wonders. Parts boxes are like a Cracker Jacks box, you never know what you are getting in the surprise. Blessings.
Nothing is sacred on the farm 🤦🤦🤣🤣🤣 Even the grandson's kiddie pool 😆😆 You said that right on the parts, you never know anymore!! Thank you my friend for always being here, I really appreciate that!! 😁😁😁👍👍👍👍
We wash parts, and pack bearings the same way.
South wind brought us above freezing temperatures,, and rain. I actually caught a whiff of skunk. It will go back into hibernation next week.
Thank you Nelson.
Thank you Mr Bryce, seems to work really well😉😉 Wow, that's amazing...you guys have some wild winters for sure!! It was actually 53 that day, but if it's below 70 my buddy needs heat 🤣🤣🤣🤣 We are headed back to 67 two days this week😳🤦 Boy the skunks have been thick this season here!! Thank you Mr Bryce for always being here, I really appreciate that sir!! 👍👍👍😁😁😁🇺🇸🇺🇸
I like the parts washer👍, my wife and kids probably wouldn't think so.😂 Looks like a fun project. Looking forward to seeing the 3000 out in the field.🍻🍻🚜🇺🇲
I did get chin music as well, we had bought it for my grandson, been sitting in my storage area for several years...I get it out to use it, now mysteriously...it was gonna be out little 7lb inside dogs swimming pool 🤦🤦🤣🤣🤣🤣🤣🤦 Well, nothing's sacred on the farm 😁😁😁😉😉 I actually did a video of just random conversations between my dad and I in the shop while working...turned out pretty cool, so enjoying the repairs with him!! I think it will be amazing on the haybine for sure!! 😁 Thank you sir for always being here, I really appreciate that!! 😁😁😁😁👍👍👍🇺🇸🇺🇸🇺🇸🍻🍻
Interesting video! I hope you got the right parts for the redo & wheel bearings! Look forward to the hay making in the spring!
Thank you sir!! I think they will make it right, and we sailing right along with the re-install 😁😁 I can't wait to have a full season of hay making!! Thank you sir for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸👍🙏🙏
Glen says sorry about the sucky parts. Looks like a tricky torque for sure.
It is gonna be a great tractor and super handy come haying season.
Take care!
Parts actually suck anymore, well the source mainly 🤦 That it is, sure enough took all I had to get the torque for sure!! I do think you are spot on correct, I think I am looking as fwd to it as my dad is 😁😁😁 Thank you both for always being here, I really appreciate that!! 👍👍👍👍😁😁😁😁😁
I tried one of those bearing packing units once. You really have to make an effort to keep dirt out of them. I ended up doing the job the same way you do. God Bless.
I have seen those , and lots have mentioned them...but I would be in the exact boat I think with dirt!! Just something about feeling that grease fill every inch of that bearing, you know it's done right then!! Thank you very much my friend for always being here, I really appreciate that!! 😁😁😁👍👍👍👍
Man, quality control these days is sickening. Hope you can get your money back without too much hassle. I like that parts washer! I'm getting ready to start building one and I look on here and Nelson way outdid me! Story of my life 🤣🤣 You're making good progress my friend! Hope you have a good week Nelson!
That it has Evan, very bad!! They actually did refund, and field scrapped them!! So my buddy will work his machinest magic and have some spares!! Oh my the parts washer....I was like oh my gosh, started to cut a 55 gallon barrel down, them spotted that pool (had almost) forgot about it, and BINGO that was the ticket 🤦🤦🤦🤣🤣🤣🤣🤣😉😉 Nothing sacred around here EVER 😆😆😆 Thank you very much my friend for all the kind words, support and encouragement!! Also for always being here, I really appreciate that!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸
Today quality control is varied, nice update.
It sure is, got two nuts in....one was fine, one was all jacked up!! That says it all right there!! Thank you my friend for the input, and always being here, I really appreciate that!! 😁😁👍👍👍
Ya just don't realize how much grime and stubborn grease can build up. I've done bearings like you since I was a kid and always worked fine. Look forward to more on the repairs.
My goodness you are so right Mr Mark!! It has really built up with those seals leaking so much!! Thank you for the insight and support on the bearing!! Never had an issue myself either!! Thank you as well for the input on the repair, and always being here!! I really appreciate that!! 😁😁😁👍👍
Nice mechanic stuff Nelson. That's the way to pack a bearing. 👍 We have kiddy pools all over at work to throw under equipment that springs a leak.🤣 It's a sad state of affairs what parts quality has come to. That tractor would be really nice for the haybine. Massive heatwave here. hit 33 degrees today. 😁
Thank you Mr Will, heck yeah...nothing is sacred when it comes to needing a tool for the job 🤣🤣🤣🤣 It has gotten really bad, prices up and quality is way down!! I think that's exactly what it will be on Mr Will!! Be a good fit for it I think!! Heat wave...that's still freeze the jewels for me, but hey....alot better than some of y'all's weather 😳😳 We will hit 68-68 F this week I think!! I really appreciate you always being here Mr Will! 🇺🇸🇺🇸👍👍👍😁😁😁
Excellent video - long live the Ford...👍
Thank you very much my friend!! AMEN to that!! Thank you as well for always being here, I really appreciate that!! 😁😁👍👍👍👍🇺🇸🇺🇸
Good morning Nelson ☮🍀. Good thing Ford still has parts for it.
Hello Mr Sven!! ☕☕☕ These ford's seem to be very opportune to have a vast aftermarket parts availability!! Thank goodness for that!! Thank you sir for always being here, I really appreciate that!! I did actually just today order some parts from the dealership 😁👍
@@Pennies_on_the_dollar That is good.
Praise the Lord!! It's all pretty inexpensive too!! I really enjoyed hearing your and the Mrs convo on the road trip video!! 😁😁👍👍
@@Pennies_on_the_dollar Thank you sir.
😁😁😁
Looks like you got a good start. Nice job
Thank you Ryan!! We are getting there my friend!! I think I forgot to comment, but that short you posted last night was epic spot on!! Thank you for always being here, I really appreciate that!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸
@@Pennies_on_the_dollar thanks, I appreciate that. Have a good night
You too Ryan, thank you sir!!
You're right about quality control, I bought a new radiator for my aging M, the new one leaked, so what really ticked me off was when I returned the new leaking one refund no problem but they wouldn't give me the credit for my old copper core, this is why people are side stepping dealers and buying online, good luck
Oh my goodness, that's crazy!! No credit for your core, geez....things have gone south for sure!! Yep you are correct!!! Thank you sir for the encouragement, and always being here!! I really appreciate that!! 😁😁😁👍👍👍
Good evening Nelson.
Good evening Ron!! Thank you sir for always being here, I really appreciate that!! 😁😁🇺🇸🇺🇸👍👍
Nice part washer mate 👍
Thank you Murphy, sometimes we use what's available 🤦🤦🤦🤣🤣🤣🤣🤣🤣 Thank you my friend for always being here, I really appreciate that!! Hope things are well, looking fwd to seeing one day!!
Never fails with ordering parts in, something is always wrong. You are not alone in that struggle. Good job so far on the tractor Nelson. 👍
It's so crazy, there is always gonna be something for sure!! It's really ashame now a days!! Thank you sir for the kind words and always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸 Hope things are going well Matt!!
Looks like a good repair……… those special tools can be hard to find, easier and probly cheaper to make your own 👍
Thank you sir, we are getting there!! AMEN to that, sometimes the fab work is easier for sure!! Thank you for the kind words and always being here, I really appreciate that!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸
Oh heck yeah, diesel is great for cleaning stuff. With it already rendered useless by being contaminated its a plus and not nearly as painful. Heck, that's the only way I've ever packed a bearing. They have those pneumatic grease packers...but I've not had the pleasure. The axle nuts must be made of the now common material known as Chinesium.... My parts washer is a 30 gallon drum, on its side, with a home made rack and heavy screen. I put the pick up tube an inch off the bottom to keep the sludge out of the pump and the pump is a 60 or 70 year old oil burner pump. Its the old style Webster (iirc) low pressure oil pump. Not the newer high pressure ones. The discharge goes to the top via a refrigerant hose off my old gauge set for flexibility. What's that you say..?? Pennies on the dollar....?? LOL
Man yeah Mr Wendell!!! Can't beat that old fuel, especially when it was already unusable!! Thank you sir for that support on the bearing!! I have as well always!! BINGO on the issues with metals now a days 😳😳!
Man that sounds awesome!! You can come up with some of the best creations!! I bet that pump will last forever!! I have one, I haven't picked up yet🤦🤦 but the pool did work pretty good!! Heck yeah your setup is absy pennies on the dollar 😁😁😁😁😉😉😉 Thank you sir for all your support and always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸🇺🇸
And ol' boy showed me how to pull the water out of oil and fuel by using a old refrigerator Freon compressor. We were out mining on the Southside of Mt. Denali in the 70's did a good enough job to get back out to the real world.
Now that sounds like something that would be very INTERESTING for sure Mr Dan!! Amazing truly!! 😁😁👍👍
I can’t wait to see it running
Thank you very much Kirk, I really appreciate that and you always being here!! 😁😁😁👍👍👍👍We are getting there for sure!!
You can look it all up on the CNH parts new holland and there are some changes in just about every year on them so i would definitely make sure you have the proper parts and tools. I had done a 4000 ford a few years ago lol lucky the dealer helped me out with getting it right
I have noticed that exact thing AJ about the suttle differences you speak of!! These nuts were right, but man they left all the thread chasings in the threads, I think I could have kept digging at them, but just said nope...bit for what they cost!! Thank you very much for the insight and advice!! Also for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸
Good Evening Nelson
Good evening Colton!!
G'day Colton
That's a great idea for the parts washer 👌. Amazing how good paint can look when you get all the grease off of it . Quality control sure isn't what it used to be 🤬. Hopefully you'll get the right stuff. I'm curious to see what you came up with for a tool to torque those nuts . Take care catch you on the next one 👍👍🍻🍻🍻🍻🍻
I got a little chin music, but nothing's sacred on the farm 🤣🤣🤣🤦🤦🤦🤦🤦 I couldn't believe my eyes, shined that blue right up!! I guess the grease kept it from fading!!! It is awful in some things, truly is!! Seems pride in work is a word no one cares about anymore 😡 Oh boy...we went round and round over physics (my machinest buddy) and I🤦🤦 I wanted a socket with another welded on the side and use the torque wrench. He said it wouldn't work like I wanted it too, a few examples and test later we got closer to a torque spec with the homemade socket and 4 ft pipe wrench than the way I wanted to do it 🤦🤦🤦🤦 Yep, you know I heard about that the rest of the day 🤣🤣🤣🤣🤣🤣🤣🤣 Thank you sir for always being here, I really appreciate that!! Sure means alot!! 👍👍👍😁😁😁🇺🇸🇺🇸🍻🍻🍻
250 is a 3 foot cheater pipe :) Nice work, and Good video.
😉😉😉👍👍 Thank you very much sir!!! 😁😁😁😁😁
You're going to have to show me how to make an intro.... Yours is way cool and matches the channel.
Anytime my friend!! And thank you very MUCH for the kind words!! I have grown quite fond of this one!! Thank you for always being here, I really appreciate that!! Hope things are well my frozen northern friend!! 😁😁😁👍👍🥶🥶
You know old man.... If you put that parts washer up on a table, or even a trailer... It would be a lot nicer on the back and knees...
Always make sure you get the races seated good the first time!!
A piece of 1/2" or better, flat iron works great for getting races and seals started..
Quality control 🙄 or.. they changed threads at some point... We've come across that before 🤬
Just yesterday, I had to wash more parts....my buddy stood back and laughed at me, grunting to get back up from trh ground!! 😆😆😆😆 He said almost the exact same thing, and then made fun when he said, now you can't move it with all that diesel fuel in it 🤣🤣🤣🤣🤣😆😆😆😆 I do not like races or seals ,.always afraid I will mess them up!! Usually I have the ace machinest there do most of them, patience and attention to very suttle changes are not my strong point 🤦🤦🤦 It was bad, he brought all of his fancy tools, they are the same but it was like the thread chasings we're all still half attached in the nut. Maybe dull tooling? You could pick some out with a pick, but I figured for what I gave I wasn't doing it!! Those axles aren't cheap if I stripped them out!! I can be a bull in a fine china shop sometimes, and we have already run across some of those small differences you and AJ speak of! Thank goodness for his fancy little tools 😁😁 Thank you Ed for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸
Coming together she shining up
It sure is Dylan, praise the Lord!! Thank you sir for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸
That axle nut is a pain Nelson
It sure can be, and has been but we prevailed I think!! Over at your place now!! Thank you sir for always being here, I really appreciate that!! 😁😁👍👍🇺🇸🇺🇸
Man, you definitely got the same luck I have. I don't know where you ordered parts from but I have had really good luck with parts from "Stevens tractor company LLC", and know I'm not related to them, but I usually get great service and parts from them.
I was starting to get them all from one place, then this issue and slow shipping!! I will have to check them out, found a place in AL that seems to be working great so far!! Thank you Mr Steve for always being here, I really appreciate that!! 😁😁😁👍👍🇺🇸🇺🇸🇺🇸
It is what it is but they sell adjustable race drivers pretty cheap at harbor freight I love mine! 🤣🤣🍻🍻🍻🇺🇸🇺🇸
🤦🤦🤦🤦🤣🤣🤣 I know, just gotta make my tight wad tail go spend the money 🤦🤦🤣🤣🤣 But I think I will look into them, because with farming I see a lot more bearings and races needing replacement!! Thank you Keith for always being here, I really appreciate that!! 😁😁😁🇺🇸🇺🇸👍👍🍻🍻
If your going to make your own repairs it’s with it brother!! 😀
Yep, I totally see that now Keith!! Thank you sir!! 😁😁😁
Kinda sucks when parts don't fit like they should.
I wasn't about to chance stripping those fine threads on an expensive axle over bad quality control 😳😳 It really messed that day up, but they refunded without a question and field scrapped the nuts 😉 Thank you Mr Robert for always being here, I really appreciate that sir!! 😁😁😁👍👍👍🇺🇸🇺🇸🇺🇸
I use a lot of gas and diesel to clean parts too. Did you put grease on the bearings so the wouldn't be dry until the oil gets to them or are they supposed to be greased? I did axle seals on a 9n year ago and we just soaked the bearings in oil a nd installed them. Looking forward to seeing the rest of the repairs.
It works so good doesn't it Mr Monty!! Stinks to high heaven's, but sure eats at grease!!! Actually these are greased bearings. That's what makes such a mess on this series. There is a seal on the axle tube in (trumpet) as they call it, that keeps rear end oil in and out of the bearing to leak out. There isn't a seal at the backing plate, just shims (next video) 😁 Then there is a grease seal behind the brake backing plate to keep that grease in on the bearing🤦🤦 It's actually a weird design, it should have been made to all just run in oil, instead of all these seals within inches of each other!! 🤦🤦Thank you sir for the input, I have several videos already, hope y'all don't get bored!! Thank you as well for always being here, I really appreciate that!! Have a great day my friend!! 😁😁😁👍👍🇺🇸🇺🇸
👍🏿👍🏿
Thank you Mr John, and for always being here, I really appreciate that!! 😁😁👍👍🇺🇸🇺🇸
👍👍
Thank you very much Mr Tom, for always being here, I really appreciate that!! 🇺🇸🇺🇸👍👍😁😁
G'day IP
Gday Murphy!!!
I bet those parts wasn't pennies on the dollar.
Well....maybe closer to nickels, but still pretty cheap 🤣🤣🤦🤦🤦 Thank you Mr Jeff for always being here, I really appreciate that!! 😁😁🇺🇸🇺🇸👍👍
Looks like some dimes or quarters to me 🤦♂️🤣
We keeping it closer to nickels, gotta uphold my image 🤦🤦🤣🤣🤣🤣🤣🤣🤣🤣
That sucks when the nuts won’t work.
🤣🤣🤣🤣🤣🤣🤣👍🤦🤦🤦🤦🤦 Oh my gosh, I knew someone was gonna point that out !! Thank you Mr Steve for always being here, I really appreciate that!! 😁😁😁🇺🇸🇺🇸🇺🇸👍👍👍
@@Pennies_on_the_dollar I couldn’t resist
I don't blame you a bit, would have done the exact same 🤣😳😳😳