![IP Farms](/img/default-banner.jpg)
- 523
- 662 705
IP Farms
United States
เข้าร่วมเมื่อ 2 ม.ค. 2021
Old school equipment rehab and the reclaiming of my families 100 + year old farm. A lot of variety to the content!
The daily routine here at the farm, is not limited to any specific task. It all has to be completed for the final outcome of planting and harvesting to occur.
Sometimes it's fabrication on the used and old but new to me equipment, sometimes it's field work, clearing, fencing etc. Whatever tool needed to complete the reclaim, has to be working and in good standings at any given time. That in turn means, plans get changed, schedules get turn upside down, and the daily can change in a heartbeat.
I am by no means and expert, or truly know that much about the "farming" side of things...but I have a passion and drive to succeed, one day at least. So in turn that takes us on a roller coaster ride from day to day.
You can reach me at ipfarmllc@gmail.com
Or:
IP Farms PO Box 2258 Welcome NC 27374
The daily routine here at the farm, is not limited to any specific task. It all has to be completed for the final outcome of planting and harvesting to occur.
Sometimes it's fabrication on the used and old but new to me equipment, sometimes it's field work, clearing, fencing etc. Whatever tool needed to complete the reclaim, has to be working and in good standings at any given time. That in turn means, plans get changed, schedules get turn upside down, and the daily can change in a heartbeat.
I am by no means and expert, or truly know that much about the "farming" side of things...but I have a passion and drive to succeed, one day at least. So in turn that takes us on a roller coaster ride from day to day.
You can reach me at ipfarmllc@gmail.com
Or:
IP Farms PO Box 2258 Welcome NC 27374
What is the verdict on the Future of the C and Super C
Finally made a choice on which one to proceed with, swapped some parts, and had to move on to bigger projects!!
Merchandise:
www.farmmerchbin.com/
Merchandise:
www.farmmerchbin.com/
มุมมอง: 380
วีดีโอ
Farmall Fever : Should we fix it?
มุมมอง 385วันที่ผ่านมา
Looked around and finally found a local tractor!! A good friend wanted a fast hitch, and I needed a few parts for my C. Had no idea it would run or that it might possibly be the next project. Tume will tell for sure, come along for the ride as we dive in closer!! Merchandise: www.farmmerchbin.com/
Saving PENNIES: DIY pto shaft rebuild, John Deere Gyromor Mower
มุมมอง 30814 วันที่ผ่านมา
Had to go build yet another driveshaft for the mower. This is the second one "professionally " built that failed. Couldn't afford to go that route so we re-used some parts and I built my own. The first one I built is still going strong on the front shaft. It can be done , with just a welder and some patience. #johndeere #bushhog #DIY #mower Merchandise: www.farmmerchbin.com/
Breathing life back into a 140 Farmall: Did I succeed??
มุมมอง 44721 วันที่ผ่านมา
Headed down east to heko a goof friend out with a project tractor that has been sitting a while. Really enjoyed the change of pace, and got to use the service truck for it's original intention. I wish I could have found one of these earlier in the year, but man yiu just can't beat an IH. #International #farmall #140 #red Merchandise: www.farmmerchbin.com/
July 2024 Crop Update: How bad is it?
มุมมอง 42021 วันที่ผ่านมา
Finally got that much needed rain, and boy it sure set thr growth cycle in motion!! I can't get over how string field corn can be!! But it also perked up the weeds and my lack of attention to it...is showing alot now!! Time will tell.just how bad it is, but I am.proud regardless. #fieldcorn #weeds #jack #drought #updates Merchandise: www.farmmerchbin.com/
A Farmall "C" comes to the Farm: Road trip with Breakdowns, but it's home!!
มุมมอง 53628 วันที่ผ่านมา
Well, the little Farmall makes it way down from the mountains of TN/VA back to its forever home!! Something I have been waiting on for many years, and will be a perfect addition to the fleet of misfits😁 Hoping to have it up and going, complete with cultivators and side dressers soon enough!! #farmall #farmallC #breakdowns Merchandise: www.farmmerchbin.com/
Road trips, Time travel as it seems, and changes for next season!
มุมมอง 350หลายเดือนก่อน
Made a road trip to pick up some smaller items, and got to visit a favorite place ...Agri-Supply ! There is a method to my madness, but you know me buying, selling, and trading! Ran across a nice Bus that I am going to make into a very nice storage building for seed, fertilizer, chemicals, and supplies. Grandpa had one years ago, so I feel he had a hand in this one as well 😉 Hopefully you guys ...
Marathon in the DUST! Full Tillage of the Wheat Ground
มุมมอง 603หลายเดือนก่อน
An AC Cab would be nice, but the otherwise dreadful dry conditions actually helped with some of the clay areas. Wanted to get ahead of the game for more winter wheat ground this season. Hopefully the ride will be smooth during burndown this fall!! #Tillage #1086 #chiselplow #offset # smooth Merchandise: www.farmmerchbin.com/
What did we BUY this time : 2024 Southeast Old Thresher's Reunion AUCTION Denton NC
มุมมอง 1.2Kหลายเดือนก่อน
Well the auction goodies and scores seemed to dry up this year. I bet if I hadn't taken the trailer, I would have needed it. Slim pickings this year, but managed a few goodies at least. #auction #penniesonthedollar #antiques Merchandise: www.farmmerchbin.com/
Welding, Fabrication, New Tools, and a Crop Update : Auction Bound
มุมมอง 394หลายเดือนก่อน
Finally got around to finishing up the trailer ramps, made the winch mounts, and made it worthy for the upcoming auction! Breaking in a new tool, and a small crop update!! #fabrication #welding #auction #roadtrip Merchandise if interested: www.farmmerchbin.com/
NOW What's Next? A few mid season welding repairs and getting ready for some field work!
มุมมอง 743หลายเดือนก่อน
NOW What's Next? A few mid season welding repairs and getting ready for some field work!
Baling Wheat Straw for the FIRST time
มุมมอง 5832 หลายเดือนก่อน
Baling Wheat Straw for the FIRST time
My First NC Wheat Harvest with a Gleaner A2 Combine: "Glenda" for the win!
มุมมอง 3.2K2 หลายเดือนก่อน
My First NC Wheat Harvest with a Gleaner A2 Combine: "Glenda" for the win!
It's FINALLY ready for Wheat Harvest! Gleaner A2 fabrication for a K model Grain Head.
มุมมอง 3852 หลายเดือนก่อน
It's FINALLY ready for Wheat Harvest! Gleaner A2 fabrication for a K model Grain Head.
Wheat Harvest Ordeal.. and we haven't even made it to the field yet: Gleaner A2 Fabrication
มุมมอง 7162 หลายเดือนก่อน
Wheat Harvest Ordeal.. and we haven't even made it to the field yet: Gleaner A2 Fabrication
Manual Johnson Grass Eliminator: "Hoeing" Field Corn, Unconventional Approach?
มุมมอง 6592 หลายเดือนก่อน
Manual Johnson Grass Eliminator: "Hoeing" Field Corn, Unconventional Approach?
The Ole Freightliner SAVES the day on some Cheap Tractor Storage, and back to a One Row SETUP!!
มุมมอง 3952 หลายเดือนก่อน
The Ole Freightliner SAVES the day on some Cheap Tractor Storage, and back to a One Row SETUP!!
Last of the Corn for 2024: How did the REDEMPTION go, or did we REPEAT the same outcome? (5-22-24)
มุมมอง 6992 หลายเดือนก่อน
Last of the Corn for 2024: How did the REDEMPTION go, or did we REPEAT the same outcome? (5-22-24)
Rookie Status: Corn Planting take TWO, another field READY (5-11-24)
มุมมอง 7323 หลายเดือนก่อน
Rookie Status: Corn Planting take TWO, another field READY (5-11-24)
What went wrong with my first ever Corn Crop at planting time: REDEMPTION possibly? (5-6-24)
มุมมอง 5553 หลายเดือนก่อน
What went wrong with my first ever Corn Crop at planting time: REDEMPTION possibly? (5-6-24)
RIP "Cousin Scott" Memories made with a Dear Friend
มุมมอง 5443 หลายเดือนก่อน
RIP "Cousin Scott" Memories made with a Dear Friend
Making a few Pennies with the First Hay of the Season! SQUARE BALES here we come...hopefully !!
มุมมอง 2.4K3 หลายเดือนก่อน
Making a few Pennies with the First Hay of the Season! SQUARE BALES here we come...hopefully !!
The time has come: Conventional Corn Journey Planting 2024 🌽🌽 First Ever Corn Crop
มุมมอง 1.8K3 หลายเดือนก่อน
The time has come: Conventional Corn Journey Planting 2024 🌽🌽 First Ever Corn Crop
Field Work Begins: Conventional Corn Journey, it's all or nothing now..
มุมมอง 2.8K3 หลายเดือนก่อน
Field Work Begins: Conventional Corn Journey, it's all or nothing now..
Row Unit LED upgrade for the White 543 Planter DIY Monitor
มุมมอง 2663 หลายเดือนก่อน
Row Unit LED upgrade for the White 543 Planter DIY Monitor
On the Road Again: Maiden Voyage for the Ole Consolidated Freightways Single Axle..
มุมมอง 6103 หลายเดือนก่อน
On the Road Again: Maiden Voyage for the Ole Consolidated Freightways Single Axle..
Row Crops 2024, Conventional Corn Journey: Planter Prep and DIY hopper monitor system.
มุมมอง 6464 หลายเดือนก่อน
Row Crops 2024, Conventional Corn Journey: Planter Prep and DIY hopper monitor system.
Row Crops 2024: HERBICIDES have been applied, a few hiccups but we made it through!
มุมมอง 5914 หลายเดือนก่อน
Row Crops 2024: HERBICIDES have been applied, a few hiccups but we made it through!
2024 Farming and Filming: Plans for the camera work
มุมมอง 2604 หลายเดือนก่อน
2024 Farming and Filming: Plans for the camera work
First, did you get this project completed and drill operating? Second, I need to replace the original tires. Can you provide the size you are using? Just trying to run across some used trailer tires to use.
th-cam.com/video/J3i3AQEu29A/w-d-xo.htmlsi=wFHfk03VyJaDBvrE Yes, it worked flawlessly. I still had some grass clumps (40+yrs) but planted amazing!! The tire size I will get for you, at the beach right now. But I will say they are 14 inch, and not the correct ones. It took me a min to compensate on the chart for the different tire size. But I got it dialed in pretty well. My email is in the about section of my channel, shoot me an email and we can text, call or email more if you need more help. Thank you again for the support and being here. There are several videos on the drill and repairs, when I fixed the clutches for the slipping aspect.
Thanks to your video, the bushing contour solved my alignment issues My 8200 came with new discs installed incorrectly
Well thank you for the kind words and so glad it helped!! That bushing contour had me so confused that day!! That's awesome you got it fixed!! Thank you for being here, and the support!! 😁😁👌🏻👌🏻
you got a lot going on buddy, always staying busy.
Seems it's always a game of catch up Mr Joey!! Thank you my friend for always being here, I really appreciate that!! 😁😁👌🏻👌🏻
Most of the big equipment we use are obsolete. Kind of a nail biter when looking for parts here. The tank cleaning thing was awesome. You got a lot going on but soon to be harvest time. Saving that old stuff is awesome when you can. Take care.
If it works, and it's paid for that's for me! I love seeing the equipment y'all use, a true inspiration! Thanknyou, it worked like a charm!! Boy oh boy do I ever, seems as though the work never ends!! Thank you both for always being here, I really appreciate that!! 😁😁😁👍🏻👍🏻👍🏻🌽🌽🌽
Your going to like that Super C im glad your keeping it.
Thank you, Joey,I sure am excited about getting it all decked out!! Thank you my friend for always being here, I really appreciate!! 😁😁👍🏻👍🏻🇺🇲🇺🇲
That gas tank cleaning looks like something we would do... 😅😅
Great minds think alike😉😁 Whatever it takes to get it dine and is cheap 🤣🤣🤣🤣🤣 Thank yall for always being here, I really appreciate that!! 😁😁👍🏻👍🏻🇺🇲🇺🇲
Nice job, I love the fuel delivery method,. It's probably good that you are getting the tank cleaned up, that could be rough after a while. God bless and stay safe
Thank you sir, that one was bullet proof...never let's me down 😉😁 I know, struggled with that alot on dad's cub. This one is pretty clean thank goodness!! Thank you my friend for always being here, I really appreciate that!! 😁😁👍🏻👍🏻🇺🇲🇺🇲
Do love these old tractor videos thanks so much for sharing them
Thank you Melvin for the support and being here always to watch them!! 😁😁👍🏻👍🏻🇺🇲🇺🇲
👏🏿👏🏿👍🏿👍🏿👍🏿👍🏿👍🏿
Thank you very much Mr John!! 😁😁👍🏻👍🏻
Loved that fuel delivery system 🤣🤣🤣🤣👍🏿👌🏿👌🏿
Me and that Ole Jack bottle go way back Mr John, it has powered many a carburetor over the years and never let's me down 🤣🤣🤣🤣🤣 Thank you my friend and for always being here, I really appreciate that!! 😁😁👍🏻👍🏻
Good one Nelson. You had some classic moves in this video. 👍🙂 That Super C is going to be a nice addition to your fleet. 🚜🇺🇸🌽
Doing what I had too Mr Will!! 😁😁😁😁🤣🤣🤣 Thank you sir, I do believe it will be a huge asset come next season!! Thank you sir for always being here, I really appreciate that!! 😁😁🇺🇲🇺🇲👍🏻🌽🌱🚜
That's a pretty clever idea of cleaning tank make a good cultivating tractor looking fwd seeing C in action
It worked amazing Gordon!! Thank you sor, can't wait to get all the attachments mounted on there!! Thank you sir for always being, I really appreciate that!! 👍🏻👍🏻😁😁🇺🇲🇺🇲
I too, liked the homemade gas tank.👌 You made the right choice to make the super C better. Figure out what to do with the C a different day.👍🍻🍻🌽🌽🌱🇺🇸🇺🇸🚜🌾🛻👨🌾🫏
Interesting way to clean out the gas tank. Yep got a C and a super C to work on myself.
It worked like a charm Russ, clean as a pen!! Man yeah, looking fwd to seeing that!! Watched the show video, but haven't went back to comment 🤦🏼 Thank you sir for always being here, I really appreciate that!! 😁😁👍🏻👍🏻🇺🇲🇺🇲
That is probably one of the most creative ways to create a portable gas tank 🤣 Probably made the right choice- trying to fix 2 tractors right now just adds to your project list.
Me and that Jack Oil bottle have supplied many a carburetor with gad over the years!! Just glad the steering is easy!! Thank you Mr Chris!! Yes ,for sure...I'm already behind on Glenda!! Thank you sir for always being here, I really appreciate that!! 😁😁👍🏻👍🏻🇺🇲🇺🇲👌🏻👌🏻
A tractor with an IV. Hope it's not in critical condition.
I think a few days in ICU will make things a little better, but may still have a few lasting issues 🤣🤣 Thank you Mr Robert, I really appreciate you always being here!! Hope things are well your way sir!! 😁😁👍🏻👍🏻👌🏻👌🏻🇺🇲🇺🇲
👍👍
Thank you very much Mr Tom, and for always being here, I really appreciate that!! 😁😁👍🏻👍🏻
Nelson the C sounds great without an exhaust, I enjoyed the video
Thank you very much, Mr Jan. They do have a distinctive sound. It is very noticeable as well between the 113 cubic inch of the C and the 123 cubic inch of the super C Thank you my friend for always being here, I really appreciate!! 😁😁👌🏻👌🏻👍🏻👍🏻
Gat a long way the other day lol I need to cut my hair I say lol but she is looking good and coming together slowly but shurly and I know I ant much good with the one hand lol but we shood have done that on Friday with the tires
Your hair is a trademark like my hat and neck garb!! 😁😁 Yes we did, so glad to have that apparatus off there 🤣🤣🤣 I'm sure I will regret it one day, but with my OCD it's just to "busy" for me 🤦🏼🤣 I can't believe you were able to accomplish what you did with just one hand, hopefully it's healing!! Thank you again, it wasn't to bad...you know he was there, just won't get on camera 🤣🤣🤣 Thank you Dylan for always being here, I really appreciate that!! 😁😁😁👍🏻👍🏻👌🏻👌🏻🇺🇲🇺🇲
Looks like you got lots of good parts in that deal. I know a man who used to fill the coolant system with vinegar, and work the engines hard for a day. It would dissolve lime deposits. You would also find out if someone used stop leak. Thank you Nelson.
It was a good deal for us both, honestly. He was happy and gave me room for expansion!! Thank you Mr Bryce!! Man that sounds wild, I can totally see how that would clean the deposits very very well!! You know all the tricks Mr Bryce!! Thank you my friend for always being here, I really appreciate that!! 😁😁😁👍🏻👍🏻👌🏻👌🏻🇺🇲🇺🇲
member nelson the way to eat an elephant is one bite at a time hang in there youll make it
That's exactly right Cedric, one nibble at a time!!! Thank you again my friend for that and always being here, I really appreciate that!! 😁😁👌🏻👌🏻👍🏻👍🏻
Fuel system was a classic! Looked like you had her on an IV. Should be a fine little tractor.
I haven't used that one in years Mr Pete, but it worked like a charm once again!! I was thankful for the easy steering though 🤣🤣🤣 I do think it will serve my purpose pretty well!! Never have too many tractors they say 😉 Thank you sir for always being here, I really appreciate that!! 😁😁👍🏻👍🏻🇺🇲🇺🇲👌🏻👌🏻
I’ve seen Matt on Diesel Creek use the same gas tank cleaning method. Something tells me that was the first time cleaning a tank this way. I agree with you on keeping the Super C after you named off the 5 or 6 minor things wrong with the C those were enough for me.
I haven't seen it before, but heard of the cement mixer tricks. I tell ya Carl, about 10 years ago I would shake the rust out by hand, but nope...bones said we need a new method 🤣🤣🤣🤣🤣🤣 I think they both have issues, but that oil pressure and hydraulics worry me. I can live with some smoke for now!! Thank you my friend for always being here, I really appreciate that!! 😁😁🇺🇲🇺🇲👍🏻👍🏻 Hope things are well your way!! 😁😁😁
Evening Nelson make one good one for now and go with it is not a bad idea
Good evening Ron!! Yes sir, may not be perfect, but I think it will fit the bill for now😉😉 Thank you my friend for always being here , I really appreciate that!! I hope things are well your way!! 😁😁👍🏻👍🏻👌🏻👌🏻🇺🇲🇺🇲
I challenge anyone to turn wrenches before you pay someone else try it yourself…. It might make a good plow tractor or something to pull wagons you can never have to many tractors
Spot on great advice my friend! Never know until you try it!! I do agree, it may be the perfect chore tractor!! Thank you sir for the great input , and always being here!! I really appreciate that!! 😁😁👍🏻👍🏻👌🏻👌🏻
Should I call you the tractor whisperer? 😀
Well Mr Tom, I guess it's a good thing I seem to have a niche for the older stuff, cause I would go broke trying to farm and buy new equipment 🤣🤣🤣🤦🏼🤦🏼 Thank you my friend, for always being here, I really appreciate that!! Hope things are well you're way!! 😁😁👍🏻👍🏻👌🏻👌🏻🇺🇲🇺🇲
Good progress on the super c Nelson. 👍
Thank you very much Matt, I feel pretty confident it will be a good one, rough around the edges but should do me well!! Thank you my friend, for always being here, I really appreciate that!! Hope things are well!! 😁😁😁👌🏻👌🏻🇺🇲🇺🇲
Omg Nelson I about fell over laughing when you grabbed that jack oil jug and stuck it in the hose 😆 🤣 😂 that was great
Me and that oil bottle have been together for years, it's a miracle I can even still find it 🤣🤣🤣 But once again it saved the day, and added a touch of humor as well 🤦🏼🤦🏼🤣🤣🤣🤣 I was thankful for the easy steering, or I might have wasted a little gas 🤣🤣🤣🤣 Thank you my friend for all your support and always being here!! I really appreciate that!! 😁😁😁👌🏻👌🏻👍🏻👍🏻🇺🇲🇺🇲
I thought that was your Beer bottle . lol Then it was for the tractor. Lol
I hesitated on showing the ole bottle trick for the gas, but seems to be a hit!! 🤣🤣🤣 Thank you my friend for always being here, I really appreciate that!! 😁😁😁👍🏻👍🏻👌🏻👌🏻
My opinion they’re farmals 🤦♂️🤷♂️🤣🤣
Well this is completely true🤣🤣🤣 But you know they fit thr operation here perfectly!! 🤣🤣🤣 Thank you Andy for always being here, I really appreciate that!! 😁😁👍🏻👍🏻🇺🇲🇺🇲🇺🇲
Good tractors! 👍
Thank you Matt!! 😉😉😁😁
@@ihfarmer8164 opinions are like assholes. We all have one. 🤣🤣
@TheGrumpyFarmer 🤦🏼🤦🏼🤣🤣🤣
I think you made a good choice to fix the super C and sideline the C for now. Hopefully it can return at some point, but for now it's better to start with the one with (hopefully) less issues. I can't wait to see it with the cultivators on it. And I really wish I had thought about strapping the tank to a tractor wheel that would have been so helpful with the Oliver tank. I didn't have to solder the screen in on the sediment bowl, it fit tight enough after I drilled the hole out. Thank you for bringing us along again, Nelson! I hope you have a good week!
I appreciate that Evan, I do think you are right. It has issues, but hopefully none as big as the oil pressure. Rhe C may get a full restore 😉 I am so excited to get thr cultivators on it and side dress rigs!! I wish I could take full credit but had been looking for a cement mixer to do the same thing. Then it hit me, a tractor tire should spin fast but slow enough not to be dangerous. It worked amazing, 3 tanks of vinegar and it's spotless 🙏🏻👌🏻 THANK YOU for that info on the strainer, I see it says a 7/32 bit to drill it out. So yours fir really snug? That's awesome!! Thank you Evan and for always being here, I really appreciate that!! Hope you have a great week as well!! 😁😁👍🏻👍🏻🇺🇲🇺🇲👌🏻👌🏻
@@Pennies_on_the_dollar My sediment bowl was different, the hole at the top was actually too big but farther down it was small. So I drilled the deeper part to 7/32 and had to drill the top part out to clear the outside of the bigger part the screen hooks to so that the small stem would reach the deeper hole. I don't know if that makes sense it's easier to show than to type about LOL. Drill it one size smaller first then finish the hole with the 7/32, it should be fine. Mine twisted in with a pair of vise grips
@evanaustin2636 That is awesome info!! Thank you very much Evan, gonna be doing that this week!! Thank you my friend!!! 😁😁👍🏻👍🏻
Dang Nelson, you sure have a lot of things going on, I don’t know how you keep 1/2 of it straight. Take care and have a blessed week ahead my friend.
I sure get way to many irons in the fire most days Mr Tony, but thank you sir!! I hope you do as well, and thank you for always being here, I really appreciate that!! 😁😁😁👍🏻👍🏻👍🏻🇺🇲🇺🇲
I have too many non PC things to say lol. So that's it. I've been around adaptive enjaneering as well.
Josh you are a man of many words and pure genius 😉😉 Sounds like we both have had that amazing experience!! Thank you Josh for always being, I really appreciate that!! 😁👍🏻👍🏻🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲
@@Pennies_on_the_dollar 👍👍👍👍🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲
I read somewhere the reason that happens is on four cylinders the engine stops in one of two places. So when the starter kicks in the same two places on the flywheel. That way you get wear over and over on many on the same spots through all the hard starting cycles.
Never thought about that, but it makes sense. Thanks for sharing that!
Wow, that is something I never thought about...but sure makes sense, because it's always that couple of areas 🤔🤔 My curiosity is way up now Mr Dan 😁😁😁
I believe 6 cylinder engines are similar.. It's been years ago, but I remember helping dad heat up a ring gear and turning it a quarter turn to "fix" a starting issue.
@GosselinFarmsEdGosselin That info is absolutely priceless, never heard of it but makes so much sense!! 😉😉
@@Pennies_on_the_dollar still gotta split it, but...
Do you soak the towel around your neck every 30 minutes or so in ice water It helps
If you can believe it or not, using it dry actually helps more for me. I swear so bad, and once my shirt gets soaked it's almost like insulation. The rag helps with the river of "sweat water" that runs down my neck, and keeps my shirt drier a little longer! Really appreciate the input and advice!! Thank you for always being here, I really appreciate that!! 😁😁👍🏻👍🏻
Now that's redneckin right there!
Tenth already? 🤯 Flywheel yup know that beast. I have to replace the one on my TD9 or turn it over and put a bevel on the teeth so the starter can grab and let go.
Yep, I know the feeling !! I figure a twist of the hand crank is so much easier than a flywheel swap 🤣🤣🤣 Boy that would be a huge job.. on that TD9 😳 Thank you sir, for always being here, I really appreciate that!! 😁😁👍🏻👍🏻
I’ve heard of heating up the Ring gear and spinning the ring gear about 30°. That way you’ll have new teeth to kick in those spots that normally don’t get used.
@@Pennies_on_the_dollar ha got a video of that 🤔 think it’s my first and second video.
Oh heck yeah. That or strapped to an old concrete mixer does the trick Nelson !! I use large nuts for retrieval by magnet.
Thank you Mr Wendell!! I think a pennies in the dollar concrete mixer may be in my future. Especially with these older tractors!! Yes sir, it sure did the trick!! 😁😁👍🏻👍🏻
👍👍
Thank you very much Mr Tom!! 😁😁👍🏻👍🏻
Now thats pretty redneck
Hey if it works it works
EXACTLY my thoughts as well sir!! Thank you my friend!!😁😁👍🏻👍🏻🇺🇲🇺🇲
@@Pennies_on_the_dollar one thing is for sure I do want works for me and what I have on hand I ask myself if I buy it will it make me money if not I don’t have a use for it
Good work man 😊
I’m speechless 🤦♂️🤣
I knew you would love this one, I should have gotten in the shot with some big hat and neck garb advertising 🤣🤣🤣🤣🤣🤣😁😁👍🏻👍🏻🇺🇲🇺🇲 Thank you Andy!!
I made a lot of money doing this I used my old ca Allison
Man yeah, I heard that!! I can see how this could be a money maker!! Thank you sor!! 😁😁👍🏻👍🏻
Yep, that will do it....😊
These farmalls 🤦🏼🤣🤣 Worked amazing Mr Brent, it really did!! Thank you sir!! 😁😁👍🏻👍🏻
That’s very smart!!
Thank you very much, sure beats the manual alternative!!! 😁😁👍🏻👍🏻👍🏻
That’ll do it
Worked like a charm Mr Matt, thank you sir!! 😁😁😁👍🏻👍🏻
Oh yea. Done it on lawn mower tanks before
When I was younger I would manually do it....nope the back says you are pushing 50 now , figure out something better 🤣🤣🤣🤣🤣🤣
That'll clean it up 👌👌 . Great idea 🍻🍻
It worked so well, I was surprised!! Thank you Matt, not a spring chicken anymore and that manual shaking is for the birds!! 🤦🏼🤦🏼🤣🤣🤣🤣🇺🇲🇺🇲👍🏻👍🏻🍻🍻
Pure genius!!!
Thank you Evan!! Sure beats the arm method 😉😉🤣🤣🤦🏼🤦🏼😁😁
100% success Nelson
Thank you Mr Jan, it worked like a charm honestly!!😁😁👌🏻👌🏻