Traxxas Revo 3 3 Nitro to 3S Electric Conversion Review and Drive
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- GoolRC Waterproof Brushless Motor 3660 3800KV, 60A ESC Combo Set for 1/10 RC Car Truck
Integy - Radio Controlled Cars, Parts & Tools Since 1993
Brushless Conversion Motor Mount Set for 1/10 Revo 3.3 & Slayer(both) T3285BLUE Set PT# 194457868754
Onyx esc 80amp
RC Discount Superstore
811 Huntingdon Pike
Rockledge PA 19046
www.RCDISCOUNTSTORE.COM
In the process of doing similar build just picked up a revo 3.3 like new , going converting mine to brushless to
Cool, you got the part number ?
I’m currently running a 38tooth steel spur gear , what tooth pinion would you suggest ? I’ll be running it on all terrains
13 or 15 . You don't want to be too hard on the diffs. They can't handle too much power.
I'm looking for that motor mount. Do you have any idea where i can order one that wil send it to Europe? i couldn't find any place here that still has them in stock.
Any help would be appreciated.
I bought it from Amazon 4 years ago. But I will look to see if it's still available.
Thanks for watching.
Awesome video my friend good stuff on the conversion from gas to electric Good runs Great job thumbs up 👍
Thanks
Spektrum 3s 4000kv motor & esc combo would be great for that truck. They only cost $105 bucks way cheaper but faster than traxxas 3s vxl system and a wheelie bar
I did have the Spektrum 3s system in it, but I needed it for another project.
By the way is the screw locking trick to the tranny and motor mount installation is the only thing you did to convert to electric and perform the way it did cause that thing is a beast for to just be on 2s lipo
Thanks, I'm putting it up against the Big Rock soon.
@@rcbeast101 I think it’ll beat that big rock all day and more durable!!
Runs good even on 2s
Thanks
Saya punya traxaas revo 3.3 mau saya rubah jadi elektrik bagaimana caranya
So where did you get the battery tray? I’m wanting to do this to my Revo and I was just planning to use basically the same 4s motor and ESC that the Traxxas Maxx uses. Do you know if the Maxx motor will mount up to that integy motor mount kit?
It should mount up and I used Arrma battery tray I had to improvise.
@@rcbeast101 so what did you do, just use double sided tape to mount the ESC above where the old 6v receiver battery went, behind the receiver’s compartment? And how did you mount the battery tray to what looks like the other tray where the air filter was and the servo for the throttle and brake?
I would really like to find a way to just do away with the transmission all together but I’m not sure how you would connect everything together an I would like to retain my reverse, too.
Oh and to get yours a little lower to the ground, you might try moving your suspension arms to the farthest outside holes on the lower A arms.
Yes it worked out well.
@@rcbeast101 so what did you do, just use double sided tape to mount the ESC above where the old 6v receiver battery went, behind the receiver’s compartment? And how did you mount the battery tray to what looks like the other tray where the air filter was and the servo for the throttle and brake?
I would really like to find a way to just do away with the transmission all together but I’m not sure how you would connect everything together an I would like to retain my reverse, too.
Nice man what gearing are you running I just converted my revo 3.3 put a 3670 brushless motor and 120 amp esc been working on getting gearing right on 3s
Factor spur and 15 tooth pinion.
How did you lock out the transmission?
I put a screw in the gear that stop reverse. If you take the transmission apart you'll find the gear that you need to lock up. I'll do another video showing exactly what gear.
By chance what type of screw did you use to lockup the trans ?
Can't remember, but it took a while to figure out what screw to use. All I remember is that it was small .
@@rcbeast101 well what about the motor mount ? You remember what brand
Integy RC Model T3285BLUE Brushless Conversion Motor Mount Set for 1/10 Revo 3.3 & Slayer(Both)
Hi bro just watched your video it's alsome bro have you checked out my new unboxing today bro
You got a new toy lol .
About to watch it .
Instead of wasting it why didn’t you just buy an electric I will never understand why people ruin a nitro car just to make it electric when you can buy an electric version of it makes absolutely no sense and never will
Car cost 70 dollars and electric conversion was free. So what's the problem?
@@rcbeast101 then don’t even buy in the first place then unless you actually have intent on running nitro leave it there for somebody that’s a nitro person to buy it I’m always looking for used nitros to buy
You are a pure idiot it's a toy 😆.
@@rcbeast101 ok
@rcbeast101 bro 🤣😭🤣😭😭😭😭😭😭😭😭😭say he pure idiot. Man this shit got me crying laughing
What did you use?
For the conversion or the power system?