Buy here on Amazon Chamberlain Keyless Entry Keypad amzn.to/3xjjzJG Visit my Amazon Storefront and shop here www.amazon.com/shop/weldingandstuff/list/38F5CD0NISCMC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_9WQ192XXA2ETZBWF09KD
Oh dude your video is the one that finally helped me get it! First of all, directions on my keypad are similar except they leave out the lines about number of Enter clicks depending on color (my Learn is Orange) my keypad just said hit Enter and then hit and hold Enter if light doesnt flash So i watched some vids and all they said was hit Learn then put in new code then hit Enter. Never mentioned the hold Star and Pound buttons to start with. And when i followed those vids it didnt set a code So after your vid and did it just like keypad instructions said and held * and # then hit Learn on opener then hit Enter 3 times since its Orange and then that finally got light to flash and now it works (Reason it got messed up in the first place is cuz last week after walking dog, she was tugging on leash as i was putting code in and i either changed code or reset code)
Life saver!!! I have been watching videos for a while with no results. This simple video got the job done and I am finally able to use my keypad. Thanks a million!!!
I’d been putting this for a long time… thanks for the instructions! My dad always said, if you put it off til the last minute, it only takes a minute. This one actually did!
It's good to know that the learn button is under the bulb's plastic covering and mine was on the left side. Your video helped me get something done that has been needed for a couple of years. Thank you
I have literally been trying to reset the passcode for my folks new place and multiple times tried following the step by step directions to no avail! This video just solved that headache and pain in 90 seconds! I owe you big time!
I tried resetting the garage code from the instructions on the keypad and ended up locking myself out of my house when it didn't work. $150 for a locksmith later, I went straightaway to find instructions on how to reset correctly-like many of the other commenters, this was the first video I found and it was PERFECT. Garage code reset, and lesson learned-never leave the house without a key just in case. Thank you!
Every instructional video should be done this simply and well done. Thank you so much! Was under a time crunch trying to fix a last few minute things for a home inspection and yours was the first video I watched. Lucky me! Thanks again!
WATCH THIS if you need to *reset JUST the keypad code (and not all of your remotes) and want a SPECIFIC DOOR to be set to the code you want*. Saw some other videos which worked, but they required pressing the "LEARN" button on the opener or resetting the whole system for 6 seconds. I didn't want to reprogram all my remotes all over again, and the door button I had was the secondary "doorbell" type (it has no LEARN button on it), so this was GREAT. Didn't realize the instructions I needed were on the panel (LOL) - even so, it was great to see you show step by step.
You are awesome for this! Thankssss. Moving into my new place May 1st, and the landlord doesn’t know how to do this and told me I could figure it out if I’d like myself. But now you made it look sooo easy. Thank you!!!! Can’t wait to try it and hope it works.
Thank you so much! I read a handful of articles online but they gave inaccurate information or were hard to understand. I appreciate you walking me through it and eliminating me having to buy a new pad! Thanks!!!
I’m trying to install my new Chamberlain keypad and have followed the instructions from the manual (same as what you’ve instructed) but I don’t get the blinking lights or hear a clicking sound from the garage door opener. I changed the batteries on the keypad, tried unplugging and plugging back in the garage door opener but nothing seems to be working. Tried at least 10 times. We have the garage door programmed to our cars for remoteless opening and it works fine. Any suggestions? I’ve tried it on two new Chamberlain keypads and still nothing.
Literally thanking the Lord for you and this video! You just save me a major meltdown on my new house that So many things are so high-tech that it's way over my head (like google nest thermostat off line from previous owner and won't work for us! blinking light sensors that I have no idea how to set up, Smart House features that make me feel dumb) But this one was simple with your instructions. The keypad did not have the right instructions... How crazy is that. Once again thank you thank you
Perfect it worked first try !!! Your the shit! I was trying so hard too learn from the instructions and it wasn’t happening but you made it superrrr easy!
I've watched countless videos but still not having luck. My garage keypad was working perfectly fine for over a year and I've programmed it a handful of times.. I followed all directions making a new pin with the * and #, entered new code, hit #, but for whatever reason my key pad doesn't start blinking (@1:16) where you would normally press enter for the color button code. Anybody have any ideas?
On the first step where you have to press * and # at the same time. On mine it doesn't blink it. I press them at the same time and it just doesn't start blinking and I do all the steps and it doesn't work
hi sorry to bother u but my mom accidently changed the pin by accident and now i cant get in the garage... how do i reset pin without the pin or what do i do now?
I just watched how to change my garage keypad code but there is one problem. I'm a senior and can't climb a ladder. Shouldn't I hire a professional to do this?
I’m not sure Marie, how high is your garage door opener? Do you have a cane you could poke the button with? Please keep us updated, I’m on the edge of my seat.
This was the best and most correct tutorial. All the other TH-camrs are idiots 😂 They totally leave this part out. Had me outside freezing. Even Chamberlains own instructions from their website does not cover it. Thanks !!
Still not working for me. The lights don’t flash. The garage door opener says it’s orange. I did steps 20 times no luck. Idk. I’ll just buy a new pin pad maybe. Mine came with the house when we bought it.
Thanks again. TO OTHERS HERE IS AN FYI - if your color light is not solid before you start it will not work. I tried it many times and until I pressed that button and saw a solid light it didn’t work for me. I guess it’s because I tried something else before it disrupted the entire programming that was in place. 🙏🏽❤️
Buy here on Amazon Chamberlain Keyless Entry Keypad amzn.to/3xjjzJG
Visit my Amazon Storefront and shop here www.amazon.com/shop/weldingandstuff/list/38F5CD0NISCMC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_9WQ192XXA2ETZBWF09KD
LITERALLY...I HAVE BEEN TRYING TO DO THIS FOR 5 MONTHS! You are the only one that has a video or instructions that I understood. Thank you so much!!!
Out of all the videos I've watch to reset my keypad, this is the only way that worked. Thank you!
I tried 5 other different sites to no avail. Thank God I clicked on yours. Problem fixed. Great Job. You are a Pro. Thank you.
Oh dude your video is the one that finally helped me get it!
First of all, directions on my keypad are similar except they leave out the lines about number of Enter clicks depending on color (my Learn is Orange) my keypad just said hit Enter and then hit and hold Enter if light doesnt flash
So i watched some vids and all they said was hit Learn then put in new code then hit Enter. Never mentioned the hold Star and Pound buttons to start with. And when i followed those vids it didnt set a code
So after your vid and did it just like keypad instructions said and held * and # then hit Learn on opener then hit Enter 3 times since its Orange and then that finally got light to flash and now it works
(Reason it got messed up in the first place is cuz last week after walking dog, she was tugging on leash as i was putting code in and i either changed code or reset code)
Life saver!!! I have been watching videos for a while with no results. This simple video got the job done and I am finally able to use my keypad. Thanks a million!!!
I’d been putting this for a long time… thanks for the instructions! My dad always said, if you put it off til the last minute, it only takes a minute. This one actually did!
It's good to know that the learn button is under the bulb's plastic covering and mine was on the left side. Your video helped me get something done that has been needed for a couple of years. Thank you
I have literally been trying to reset the passcode for my folks new place and multiple times tried following the step by step directions to no avail! This video just solved that headache and pain in 90 seconds! I owe you big time!
I tried resetting the garage code from the instructions on the keypad and ended up locking myself out of my house when it didn't work. $150 for a locksmith later, I went straightaway to find instructions on how to reset correctly-like many of the other commenters, this was the first video I found and it was PERFECT. Garage code reset, and lesson learned-never leave the house without a key just in case. Thank you!
Every instructional video should be done this simply and well done. Thank you so much! Was under a time crunch trying to fix a last few minute things for a home inspection and yours was the first video I watched. Lucky me! Thanks again!
Ok
Thank you for this. Was reading the instructions and it seemed so complicated. But now that I watched your video, it made it so much simpler.
WATCH THIS if you need to *reset JUST the keypad code (and not all of your remotes) and want a SPECIFIC DOOR to be set to the code you want*.
Saw some other videos which worked, but they required pressing the "LEARN" button on the opener or resetting the whole system for 6 seconds. I didn't want to reprogram all my remotes all over again, and the door button I had was the secondary "doorbell" type (it has no LEARN button on it), so this was GREAT. Didn't realize the instructions I needed were on the panel (LOL) - even so, it was great to see you show step by step.
Would this delete all old codes with this instruction?
The easiest video I’ve watched to reset my garage door opener! Thank you so much ⭐️⭐️⭐️⭐️⭐️
All how to videos should be like this one. All the info you need and none you don't. Thanks!
Thank you, this video was very helpful to see you demonstrate and what really helped was that you mention about only having 30 seconds in between!!!
I tried following a bunch of instructions including Chamberlain website. None work but this video was perfect the first time. Thank you
THE video to watch. My chamberlain instructions do not track this which led me to a dead end. Glad I found this.
You are awesome for this! Thankssss.
Moving into my new place May 1st, and the landlord doesn’t know how to do this and told me I could figure it out if I’d like myself. But now you made it look sooo easy. Thank you!!!! Can’t wait to try it and hope it works.
Where do you find the color of the learn button?
This video helped me out when my code randomly stopped working this week. Thank you!
YOURE THE MAN! I watched like 12 videos none of them helped but yours worked!
The best instruction video, had to sift through 3-4 AM that that didn’t work before this one
Thank you so much! I read a handful of articles online but they gave inaccurate information or were hard to understand. I appreciate you walking me through it and eliminating me having to buy a new pad! Thanks!!!
DUDE. THANK YOU. My instructions were wrong on the device and Chamberlains website. This however was correct and worked. THANK YOU
Thank you!
I was trying this for about 30 mins before I found your easy to follow video.
Glad it helped!
Sir, thank you so much. Clearly, resetting a keypad remote is rocket science. Thank you for educating me!
Thanks for the second set of instructions. The garage door keypad had the wrong set of instructions on mine.
It worked great after watching another video which did not work. Thank you!
I was so annoyed with this nonsense. Thankfully, your video helped me to do it in under a minute. Thank YOU!!!
Wow that is complicated, my girlfriend couldn't get it to work, now I know why ... thank you for the posting! I really appreciate it!
Thank you I watched so many videos and this is the only one works for me !
This is the only video that worked for me. Thank you!
Thank you so much! It worked. I've tried so many different directions before this.
Thank you! Everything I saw online before this seemed to skip a step, but this worked.
I’m trying to install my new Chamberlain keypad and have followed the instructions from the manual (same as what you’ve instructed) but I don’t get the blinking lights or hear a clicking sound from the garage door opener. I changed the batteries on the keypad, tried unplugging and plugging back in the garage door opener but nothing seems to be working. Tried at least 10 times. We have the garage door programmed to our cars for remoteless opening and it works fine. Any suggestions? I’ve tried it on two new Chamberlain keypads and still nothing.
OMG!!!! THANK YOU FOR THE GREAT INSTRUTIONS! VERY CLEAR AND SIMPLE.
How about when changing codes on garage door unit? Thx.
Best video that actually works
Was hoping this was to Reset, not reprogram. Good video for setting the code.
Finally a helpful and successful resource. Thank you!
You're welcome!
Thanks for making the video. Bought a home and the prior owner didnt know the code so I thought I was SOL.
Can that one keep bad control multiple garage door openers
Thank you for making sense out of this madness
Man, nan, man..i did it following you on the video and WOW it was easy!!!
I couldn't do it following the instructions
Glad it helped!
All I had to do was push the button on the motor, punch in a code, and hit enter. Done
Literally thanking the Lord for you and this video! You just save me a major meltdown on my new house that So many things are so high-tech that it's way over my head (like google nest thermostat off line from previous owner and won't work for us! blinking light sensors that I have no idea how to set up, Smart House features that make me feel dumb) But this one was simple with your instructions. The keypad did not have the right instructions... How crazy is that. Once again thank you thank you
Very well done… we got it reprogrammed thanks to your great instructions!
I been through SO MANY videos and this is the one that worked. Thanks!!!
Thanks for the information its always easier IMO to learn from watching something be done.
Thank you!! You made it simple and easy to follow!
Perfect it worked first try !!! Your the shit! I was trying so hard too learn from the instructions and it wasn’t happening but you made it superrrr easy!
This was my 4th try and it worked!!
Your video was great it worked for chamberlain. Thank you 😊
Omg THANK YOU we have been trying to follow the instructions on the inside lid and they were wrong. This worked 🙂
Thank you so much! This was very helpful
I've watched countless videos but still not having luck. My garage keypad was working perfectly fine for over a year and I've programmed it a handful of times..
I followed all directions making a new pin with the * and #, entered new code, hit #, but for whatever reason my key pad doesn't start blinking (@1:16) where you would normally press enter for the color button code.
Anybody have any ideas?
My door will not close with enter button. Did the 1 and 9 programming but still will not work.any suggestions.
Wow Great information. All the other videos I tried did not work at all. Thank you very much.
This was exactly what I needed thank.
Thanks for the video. My problem is that when I hanged the battery there is no keypad light. Does it mean the unit is dead?
Couldn't have figured that out ever .thanks. Jesus loves you.
Thank you for the video I would have never figured that out
You are welcome
On the first step where you have to press * and # at the same time. On mine it doesn't blink it. I press them at the same time and it just doesn't start blinking and I do all the steps and it doesn't work
Success! Your video clarified the instructions. Thanks
Would this delete all old codes?
Thanks for making this video. You’re the man. 🙌🏾
hi sorry to bother u but my mom accidently changed the pin by accident and now i cant get in the garage... how do i reset pin without the pin or what do i do now?
Omg thank You your video got my keypad working You are Awesome 😎
Thank you! Remote instructions confusing! 🙂
Finally a video that worked thanks a bunch i did it!!!
Great instructions video. It worked perfectly. Thank you so much!
Do I need to put only 1234 or I can put any other number also?
And mine is yellow button so how many times do I need to press enter button?
Thanks!
Thanks for the support
The best video ever thank you so much
Worked like a charm. Thanks for the excellent video.
Legend. Absolute MVP. Thank you.
You just made me some money my friend! Thanks
Thank you. You made it so easy.
Very simple and easy to understand, excellent 👍🏼 thank you
I just watched how to change my garage keypad code but there is one problem. I'm a senior and can't climb a ladder. Shouldn't I hire a professional to do this?
I’m not sure Marie, how high is your garage door opener? Do you have a cane you could poke the button with? Please keep us updated, I’m on the edge of my seat.
This was the best and most correct tutorial. All the other TH-camrs are idiots 😂 They totally leave this part out. Had me outside freezing. Even Chamberlains own instructions from their website does not cover it. Thanks !!
Glad it helped!
Thank you for your instructions.
I’m so profundo of my self (I did it) well thanks to you :)
Still not working for me. The lights don’t flash. The garage door opener says it’s orange. I did steps 20 times no luck. Idk. I’ll just buy a new pin pad maybe. Mine came with the house when we bought it.
Thank you so much!!! This was the best and easiest explanation. Thank you for the visual example
Job well done. Thanks for the information.
Wow it worked thank you so much!!
Thank you so much, your great!!!
Thanks again. TO OTHERS HERE IS AN FYI - if your color light is not solid before you start it will not work. I tried it many times and until I pressed that button and saw a solid light it didn’t work for me. I guess it’s because I tried something else before it disrupted the entire programming that was in place. 🙏🏽❤️
This helped quite a bit! Great video!!!
U explain well thank u.....100 thumbs up
Great share Fam. Nice and easy. Mahalo!! 🤙🏾
Thank you so much 🙏🏻., it worked for me on the first try .👍🏻
THANK YOU SOOOOOOOOOOOOO MUCH!!!
Absolutely the best one!!
Clear and concise. Thanks
Glad it was helpful!
How do I know what color I have. Thanks
Super helpful. It worked! Thanks
Glad it helped!
Thank you!!!! This helped a ton!
Glad it helped!
Bro you are the greatest thank you !