Thank you so much for this video. I have a 2019 Si sedan, my rattle is as bad or if not worse - got to 12” subs. This has given me hope, the rattle is currently so bad I’m not even listening to music as often as I’d like
I did the same using AC foam and Kill Mat. Worked like a charm. It took a few days to isolate all the rattles, but I got em. Wires where a big issue, I wrapped them with thin strips and tesa tape.
Great work! I am just starting my voyage to that aftermarket. .."Slap!" Huge difference! I've got a seventh Gen Ep3, and I plan to do the sound/ resonance work on the flat/ rattle prone areas, too!
This video helped tons I have 2 Memphis 12s in my q50 Infiniti and my license plate and trunk rattle so bad it is kinda embrassing, but it sounds a lot nicer inside . I am going to try to attempt this myself , lol wish me luck
Great job bro!!! 👍👍👍 I'm pretty sure theirs got to be a way to get zero rattles coming from the trunk!!! If anything they are just coming from your spoiler now, and the inside edge's of all around the trunk where it bounces up and down!!! Maybe with some sound deadner all the way around threw the inside could possibly stop all the remaining rattle's!!! Other than that it sounds pretty damn good!!! Great video demonstration on how to apply the sound deadner it looks fantastic!!!!👌👌👌
Hi. How many sheets did you use? I plan on doing the same area you did but also the bottom area where my spare tire is. I just wanted to know how many sheets I should order. Great video, btw
Hey bro I just started this process yesterday and I'm new to the spl setup trying to get ready for my first show and to compete a little for fun I have been doing a major overhaul on my 19 Camry just installed my autotech alternator and VCM ordered a 29AH SCIB bank should be here by Friday got a new deafbonce AAK 6k and a second run of 0 gauge OFC to the back anyway I started installing some silass max 120 mil deadener i got 2 layers on the trunk lid and rear deck and ran out I'm going to order some more but I'm wondering if that is going to be enough it's essentially 240 mil thick how much is right
whats the best way to remove old sound deadening from trunk. I have the 120 mil sky high just want to do some light touch ups and make it look good again
Does bass increase or decrease adding second skin? I bought some and just wondering. I know it stop rattles the the question is the bass going be the same or you get more bass or less?
Hi! Can you do a video showing that the peel and seal does not have the mask as you say like the sound deadener that you use? And show the differences?
JeepAndBass it happens! i’ve never been able to blur out a moving object so props to u for that! hope to see you at a show soon again, i heard they start back up in april in sacramento? but i’m trying to figure out if there’s any sooner than that
Dylan Anderson I’m trying to fix it with the TH-cam editor (which sucks to use lol) Usually they start up around then. I’m not sure since my Jeep is down for now and haven’t been paying attention to show dates.
Why does it matter if anyone sees the license plate number? I recently read an article about that and the conclusion of their article was that there is no reason whatsoever to blur your plate. Am I missing something?
Does the inside of your center taillight rattle against the housing ? I’ve tried everything but opening the housing up but unfortunately I just might have to.
I know this was 3 years ago but do you recall how many sheets you used in the trunk space ? I just dropped 2 sound qubed 12s and my lord does this thing rattle so bad.
@ civicandbass what do you think on a battery isolator relay. I was going into install one for my starting battery a AGM and for secondary a lithium battery. Hope you Can à opinion
tuba Moraz That would be a good idea since you shouldn’t mix agm an lithium. Or you could get rid of the agm all together. The agm will drain the lithium when the car is off.
Hey jeep and bass have you tried to spray foam the trunk lid or take the trunk lid off and use smd sun flash resin or use on roof braces or resign the trunk carpet I do love deaf bounce ridgid sound deadener that @thelifeofprice sells
Just from the vid it's huge difference, bet it's even more noticeable in person. Awesome vid!
Thank you for saving me installation costs.Judt dynamatted my trunk lid.Helped with rattles at least 85%
Thank you so much for this video. I have a 2019 Si sedan, my rattle is as bad or if not worse - got to 12” subs. This has given me hope, the rattle is currently so bad I’m not even listening to music as often as I’d like
Jay Lakhani I also found that adjusting the trunk latch bracket helped a lot. I put it to the lowest position so the trunk closes tighter.
I did the same using AC foam and Kill Mat. Worked like a charm. It took a few days to isolate all the rattles, but I got em. Wires where a big issue, I wrapped them with thin strips and tesa tape.
Great work! I am just starting my voyage to that aftermarket. .."Slap!" Huge difference! I've got a seventh Gen Ep3, and I plan to do the sound/ resonance work on the flat/ rattle prone areas, too!
And that’s just one layer!!! Sounds so much better.
Awesome Vid!! Cant wait for more Civic builds. Watch out for the rear deck rattle, its notorious in this generation of civic.
Just did a ton of work on that today. Turns out it solved all the left over rattle in this video.
Doing a civic install, how'd you fix the rear deck rattle?
This video helped tons I have 2 Memphis 12s in my q50 Infiniti and my license plate and trunk rattle so bad it is kinda embrassing, but it sounds a lot nicer inside . I am going to try to attempt this myself , lol wish me luck
Did u do it
I just did my trunk I'm very happy! my subs are facing the back seats though I have them down most of the time for full bass experience
Could you explain why you decided to face the subs towards the backseat?
@@j.t.8320 so it won’t rattle in the trunk when you have full bass
Excellent video brother sounds great
Great job bro!!! 👍👍👍 I'm pretty sure theirs got to be a way to get zero rattles coming from the trunk!!! If anything they are just coming from your spoiler now, and the inside edge's of all around the trunk where it bounces up and down!!! Maybe with some sound deadner all the way around threw the inside could possibly stop all the remaining rattle's!!! Other than that it sounds pretty damn good!!! Great video demonstration on how to apply the sound deadner it looks fantastic!!!!👌👌👌
To new for foam but big difference sounds alot better thanks for the tips
love the bass with the deadener sound better you can hear the lyrics awesome video!
Thx for the tips. I need to do this to my 2017 civic LX.
Good job I'm ordering mines now
very nice install and thanks.
Hi. How many sheets did you use? I plan on doing the same area you did but also the bottom area where my spare tire is. I just wanted to know how many sheets I should order. Great video, btw
So far, no one has proven that there is a significant reduction of noise. This is the fifth video that I have watched.
Well there is lol
Hey bro I just started this process yesterday and I'm new to the spl setup trying to get ready for my first show and to compete a little for fun I have been doing a major overhaul on my 19 Camry just installed my autotech alternator and VCM ordered a 29AH SCIB bank should be here by Friday got a new deafbonce AAK 6k and a second run of 0 gauge OFC to the back anyway I started installing some silass max 120 mil deadener i got 2 layers on the trunk lid and rear deck and ran out I'm going to order some more but I'm wondering if that is going to be enough it's essentially 240 mil thick how much is right
AWESOME VIDEO AS ALWAYS BROTHER
Which size is the best to go with? Was thinking of doing my back doors back panel behind my back seats and maybe the headliner in my 2020 ram 1500
whats the best way to remove old sound deadening from trunk. I have the 120 mil sky high just want to do some light touch ups and make it look good again
Does bass increase or decrease adding second skin? I bought some and just wondering. I know it stop rattles the the question is the bass going be the same or you get more bass or less?
It should increase some. The biggest gain you’ll get it clarity. It will sound smoother and more accurate and obviously not rattle so much! Lol
@@JeepAndBass the reason i was asking because i bought some mojo skin dead and i lost a lot of bass i guess you got find it sweat spots.
Wow sounds soooo much better
Nice video.
Im thinking about entering my truck down at surf city this year. Do your know any good bass race songs.
Thanks
Cool
Fine whine by ASAP rocky
Hi! Can you do a video showing that the peel and seal does not have the mask as you say like the sound deadener that you use? And show the differences?
Did it sound louder in the car afterwards?
Looks good Brother! I need to get a new roller, which one are you using and how long has it lasted?
not sure if you're too worried about it but just a heads up 8:13 your plate number is seen
I tried my best, but didn't catch that :(
JeepAndBass it happens! i’ve never been able to blur out a moving object so props to u for that! hope to see you at a show soon again, i heard they start back up in april in sacramento? but i’m trying to figure out if there’s any sooner than that
Dylan Anderson I’m trying to fix it with the TH-cam editor (which sucks to use lol)
Usually they start up around then. I’m not sure since my Jeep is down for now and haven’t been paying attention to show dates.
Why does it matter if anyone sees the license plate number? I recently read an article about that and the conclusion of their article was that there is no reason whatsoever to blur your plate. Am I missing something?
Burnt Coils I typically don’t care. But this video has it right in your face and these days who knows what people will do or try to report
Does the inside of your center taillight rattle against the housing ? I’ve tried everything but opening the housing up but unfortunately I just might have to.
I stuffed some foam in there. The trick is to not block the tail light, it’s definitely a pain.
is it worth it to add mat to the doors too?
The rattles are suppose to be there. Its the 20hz test tone thats not suppose to be there lol
No rattles for me :)
Used the same on my 300, that stuff is sticky for sure, oh then I decided to add a srt spoiler, ya fun times but that shca stuff works well
I know this was 3 years ago but do you recall how many sheets you used in the trunk space ? I just dropped 2 sound qubed 12s and my lord does this thing rattle so bad.
Have you used the 3 in 1 mlv stuff?
What's the name of the song at the end?
@ civicandbass what do you think on a battery isolator relay. I was going into install one for my starting battery a AGM and for secondary a lithium battery. Hope you Can à opinion
tuba Moraz That would be a good idea since you shouldn’t mix agm an lithium. Or you could get rid of the agm all together. The agm will drain the lithium when the car is off.
Sweet i put that exact black label sky high in mine.......doubled up. Cause I'm pooouunding
Nice job, did you happen to do a video of the speaker change in the Civic?
SugarPimp904 All the speakers are stock for now. I removed the stock woofer. Still getting things together to do the speaker upgrade.
@@JeepAndBass what will you replace the stock woofer with? I would like to get more bass, but would like to keep the trunk empty. Any suggestions?
Nice job. Where you get your second alternator bracket from.
Made it myself, just some metal and a welder :)
Hey jeep and bass have you tried to spray foam the trunk lid or take the trunk lid off and use smd sun flash resin or use on roof braces or resign the trunk carpet I do love deaf bounce ridgid sound deadener that @thelifeofprice sells
No spray foam going in this car lol! I am going for a little modification possible. I did more work today and got it to nearly no rattle whatsoever.
@@JeepAndBass oh you added more deadener
U can get rid of all ur rattle check out smd’s Lexus no rattle at all pushing I think 15k watts
I dont know where most of the vibration comes I did most of my vehicle even both license plates.
Peel n seal same u want mass double it up
It’s not the same by any means. You’ll regret using it.
👍
What's your setup?
Gerardo Gomez 2 DC level 3 10s on a DC 2k. Will post a full demo video soon
Nice hat
👈👈Let's get it
SO "BASICALLY" IT IS😖😲😭😂😂🗣️🗣️🤔🙃🤣🤙🏼🤘
Those are lies about peel and seal not working! Show us proof that it does not work?
Lies about peel and seal not sticking properly! Show proof that it does not stick properly?
It’s not the sticking…it’s the fact peal and seal hardly has mass. It doesn’t effectively dampen panels.
-1 wind noise, wrap that sh around yr mic