How to CALIBRATE Mavic Pro Vision System - DJI Assistant 2 Tutorial

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ธ.ค. 2024

ความคิดเห็น • 192

  • @whiznit123
    @whiznit123 7 ปีที่แล้ว +2

    dude you saved my A$$, I spent HOURS on the DJI forums trying to find someone to help me and NO ONE had the solution as to why I could not see the calibrating dots on my Mac and then I ran across you!!!! It was as you said...I changed my screen resolution and BAM!!!I swear if I could get my hands on you I'd kiss you square on the jaw....THANK YOU!!!!!

    • @121snapshots
      @121snapshots 6 ปีที่แล้ว

      Greg Whisennant what setting did you use?

  • @shongwehunter7183
    @shongwehunter7183 5 ปีที่แล้ว +1

    I work as Private Investigator and an appointed Deputy Sheriff and a dept collector and tracing of goods and people that are wanted by the Law I'm based in Swaziland I bought myself the DJI Mavic Pro which assist me on my work very easily and with no problems and youtube has helped me greatly time and time over and over, I like to say thanks guys u are doing a great job here because if it was not for u I would have not got this far in understanding the works of my Drone DJI Mavic Pro. last I thank DJI for the Drone which is the best to work with.

  • @KeithRobertson1
    @KeithRobertson1 2 ปีที่แล้ว +1

    Thank you for this video. I've owned the Mavic Pro since launch, and a few months ago I got the "Calibrate Vision Sensors in DJI Assistant 2" error. I ignored it because I only used the drone for short flights in the field. Well, I listed the drone for sale as I finally want to upgrade, and figured I'd calibrate the sensors before I sold it. Your video made the process extremely easy. Setting my 4K Monitor to 1600 x 900 was crucial. Thanks again

  • @johnhoover3345
    @johnhoover3345 7 หลายเดือนก่อน

    I know I'm a little late to the party here but, Thanks so much!! My issue was two-fold. The first was the drifting while hovering. Second was a constant "Obstacle" Msg on the radio itself the last two flights. It would fly fine but the controller would shake every 5 seconds. This Vision System Sensor calibration solved both and I really can't thank you enough! My laptop's screen res was fine so I didn't have to tweak anything there. Biggest issue was the correct v1.2.5 You Rock!

  • @breeze787
    @breeze787 7 ปีที่แล้ว

    I had two problems. First I had a yellow alert across my screen that said the 'forward vision sensors' needed calibrating. I downloaded the DJI Assistant app for the mac but when I clicked on calibrate now the screen was just as white as yours. Thank you so much for clearing up the reason why that happened. I readjusted the display resolution to 1600 and wella I got the large black dots and the blue squares to allow me to continue calibration. The gimbal on my Mavic was also cocked to the right and not facing straight forward. Calibrating the gimbal took care of that problem and now I get the Ready to Go green light that I hadn't had for a few weeks now. All thanks to you. Thumbs up buddy!

  • @shadow7423
    @shadow7423 6 ปีที่แล้ว +1

    Thank you. I managed to calibrate it successfully. 1600x900 was the key for me. Thanks for the video again.

  • @KenKneknaneek
    @KenKneknaneek 7 ปีที่แล้ว

    Thank you so much kind sir! I just got my mavic pro the other day and in the two days trying to figure everything out, i messed up the vision system. Your amazing video was a god send, and solved that problem for me. I have used your url on some sites now directing anyone with this problem to check out your video for this. Thank you again and Happy Flying!

  • @johnjamrowski7505
    @johnjamrowski7505 2 ปีที่แล้ว

    Thanks...I also had the white screen. Doing a reset on the screen did it. Worked perfectly. Thanks for an outstanding explanation. Take care.

  • @keithbarber5191
    @keithbarber5191 7 ปีที่แล้ว +1

    Thank you - I dropped my Mavic - i tried calibration and nothing came up on the screen - looking at the pics of the sensors it looked like smashed glass - I altered the resolution of my mac and it all sprang into life - so I now know the cameras work fine

  • @nikwood8400
    @nikwood8400 3 ปีที่แล้ว +1

    Thanks so much for the patient and thorough way you explained this. I have been trying for months to calibrate on my MacBook and your excellent video walked me through all the obstacles I was facing and my Mavic is now fully operational again...another big thanks.

  • @bluesteeltraining
    @bluesteeltraining 6 ปีที่แล้ว +1

    Great job! I'm glad you figured out the display issue, as I had the same problem. It would have taken me all night to figure it out. Thanks!

  • @IkonicLionProductions
    @IkonicLionProductions 4 ปีที่แล้ว +1

    Wonderful information. Just followed your tutorial to calibrate my Mavic Pro Platinum.

  • @intheshadows..2107
    @intheshadows..2107 10 หลายเดือนก่อน

    Thanks for the video. I am calibrating my Mavic pro right now. I can do all the calibration, but after doing all the sensors the final calibration doesn't seem to happen

  • @dominiquejean1682
    @dominiquejean1682 5 ปีที่แล้ว +1

    Thank you! I have a shoot in an hour and I've been trying to figure this out for ages! Your vid fixed it no problem. Cheers!

  • @otistate1848
    @otistate1848 ปีที่แล้ว

    Good evening I just got a mavic pro off ebay and I had to preform the calibration like you demonstrated but I am still getting the error. Any further advice?

  • @MiguelPerez-gn6pg
    @MiguelPerez-gn6pg 7 ปีที่แล้ว

    I greatly appreciated this video, never thought in a million year this issue was related to screen resolution.

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  7 ปีที่แล้ว

      +Miguel Perez u are welcome. I was pretty surprised about this myself

  • @dokzund
    @dokzund 3 ปีที่แล้ว

    Thanks for this information. It worked for me. A little challenging but I got it callibrated and back in the air. My biggest problem was installing the Assistant itself. Chrome would not open the file saying it was not certified or signed by the developer. I used Safari and I could manually tell my Mac to trust it. After that all went pretty well. Thanks again for your help.

  • @dark-matters
    @dark-matters ปีที่แล้ว +1

    I have tried this a million times and keep getting calibration failed, any suggestions? I have rebooted pc, and the drone reinstalled the software , and have the latest firmware installed tried different USB cables.. I'm at a loss

  • @Eyehearttravels
    @Eyehearttravels ปีที่แล้ว

    Where can I buy the Ian from. Mine didn’t come with the long Ian for it ?

  • @AndyTjan
    @AndyTjan 7 ปีที่แล้ว +2

    Thank you for your help, this was extremely helpful given all the problems people are having using a MAC.

  • @SunriseWaterMedia
    @SunriseWaterMedia 4 ปีที่แล้ว

    Thank you, past Henrik!
    I had trouble with the end at 7:11. It said 0% forever.
    After trying 3 times and reinstalling the DJI assistant, with no luck, I decided to use a PC instead of my Mac.
    First try, it calibrated perfectly. All good now. 👍

    • @samehnegm2722
      @samehnegm2722 3 ปีที่แล้ว

      you intalled the wrong software .. download assitance 2 for mavic will work

  • @purplefinchphotodronellc4558
    @purplefinchphotodronellc4558 7 ปีที่แล้ว

    Thank you! Had no idea about the Assistant Program! Plus I'm going on vacation and calibrating the sensors before I go is a must!

  • @chucha1719
    @chucha1719 7 ปีที่แล้ว +4

    Thanks. But would advise to always take off the propellers when you're not flying......it could hurt a bit.......keep on the good work

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  7 ปีที่แล้ว +1

      good advice should have thought about that

  • @salvadormartinez1289
    @salvadormartinez1289 3 ปีที่แล้ว

    I need help with my mavic pro i had a crash and im having trouble with camera

  • @MikeWeiner
    @MikeWeiner 6 ปีที่แล้ว +2

    While I really appreciate all of your help, it's just unacceptable that so many people have trouble with the DJI software. "Please restart your aircraft" actually requires you to restart the PC? I had to get a NON-DJI cable to connect to a DJI product? A specific resolution is required for even attempting calibration? As I said, I appreciate the OUTSTANDING help you provide in this video, but as a software QA professional, DJI is screwing themselves BADLY by not having better support software for such an expensive product.
    Sadly, I can't get the CALIBRATE NOW button to not be grayed out. Darn you, DJI! Even having to go to a PC is a big ask, but these problems? How do they stay on top? Is there anything else you can recommend? Thank you.

    • @michaelhaze4507
      @michaelhaze4507 6 ปีที่แล้ว

      Same😤😤, any fix

    • @tennesseewhiskey2157
      @tennesseewhiskey2157 6 ปีที่แล้ว

      Yeah my Calibrate Now button is grayed out. Any idea how to fix this problem?

    • @michaelhaze4507
      @michaelhaze4507 6 ปีที่แล้ว

      You fix this buy running computer in safe mode and use a usb to install dji software in safe mode. it will work

  • @simyk810
    @simyk810 2 ปีที่แล้ว

    This was very useful, thank you for the video. I faced the same problem with my Mavic Pro so I followed the instructions step by step - problem solved! 👏👏 The MacOs file size is slightly above 200MB and is compatible with Big Sur. I also updated the firmware version. Everything works like charm now!

  • @elisilva1039
    @elisilva1039 ปีที่แล้ว

    Why doesnt it show the red calibration square on my side just the green one. i have rebooted the app and my computer . Iv'e also changed the display on my screen and still no red square

  • @rgmotovlog674
    @rgmotovlog674 4 ปีที่แล้ว +1

    Hello, please help me. I dont know what screen size to put into Calibration. I put 19" but after calculating, it was said to recalibrate and the screen size was error. If Im going to recalibrate, the camera in the monitor was gone. Please help, i cant use my dji mavic

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  4 ปีที่แล้ว

      It needs to be quite low, so you just need to experiment to get it right

  • @butch3715
    @butch3715 6 ปีที่แล้ว

    Thank you for this video. The process failed for me 2 times but on try #3 it worked.

  • @rashidn778
    @rashidn778 5 ปีที่แล้ว

    Ассистент2 sees Mavik about, but at the beginning of the calibration, the approach of mavik to the calibration table, nothing happens. Finding that the sensors are off. How to check the connection of sensors to Mavic Pro?

  • @brianphuket5951
    @brianphuket5951 4 ปีที่แล้ว +1

    I downloaded Assistant +2v 1.2.4 it keeps telling me I have the wrong version? it says "Device not supported." I find no newer software than the 2016 version. I have a Mavic Pro, am I not understanding something? been through 5 attempts, nothing seems to work. TIA

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  4 ปีที่แล้ว

      Mabe, try see if you can get an older version

  • @robinilola
    @robinilola 7 ปีที่แล้ว

    I had this problem with my mavic. Thank you for the advice

  • @USMC-ce2ek
    @USMC-ce2ek 5 ปีที่แล้ว +1

    Thank you, this helped with my New to me Mavic Pro!

  • @DQuadCon
    @DQuadCon 4 ปีที่แล้ว +1

    Hi Good day, great video. Just one question, can the DJI vision system calibration work with a 14 inches laptop screen? Thanks and more power to you and your channel!!

    • @ryanragoo2295
      @ryanragoo2295 ปีที่แล้ว

      Hi. I'm trying to do the same thing with a 14in laptop. I got as far as the dotted screen but no follow box and follow indicators from the drone. Was that your issue?

  • @amarmandakhbattogtokh4070
    @amarmandakhbattogtokh4070 3 ปีที่แล้ว

    great guy helped me out keep doing video like this

  • @DanaCrosby
    @DanaCrosby 3 ปีที่แล้ว

    Thank you sir it worked perfectly I had no issues at all I've added you to my playlist altitude

  • @MySpace777
    @MySpace777 7 ปีที่แล้ว

    Hello, i always get a grey color on the sensor status on the down left corner of the calibration page, with abnormal list of errors ( vision system error) since day one

  • @corry325
    @corry325 2 ปีที่แล้ว

    So what do I do if it’s not complaining the download at the end

  • @alnaee2634
    @alnaee2634 5 ปีที่แล้ว

    Thanks for the video ! My dji mavic air does not appaer in the windows of assistent 2 . Win 10 can read the mavic air but ass.2 does not . Do you know where do i go wrong ? Appreciate any help

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว

      Did you turn it on after you plugged it in?

  • @hermanbroodnodig
    @hermanbroodnodig 7 ปีที่แล้ว

    Excellent video the bit about the MAC resolution is a great help !

  • @ranini.c
    @ranini.c 6 ปีที่แล้ว

    hello there are 2 sensos at the bottom of the drone. does both light lit up or only one ?

  • @AlainStoffenPhoto
    @AlainStoffenPhoto 7 ปีที่แล้ว +1

    Thanks a lot for this very useful video that helped me a lot to set up my new mavic pro !

  • @gimonostudio
    @gimonostudio 6 ปีที่แล้ว

    PLEASE ADVISE!!!! This is very frustrating. the calibrating works fine when I point the drone close to the screen but when I have to pull it back to calibrate it has an error saying can't calibrate image. I've tried all the resolutions and get the same message. When I calibrate the bottom cameras they work just fine. It's only when I have to pull back the drone further from the image. Is this user error or the camera?

  • @kajaldigitalphotostudio40
    @kajaldigitalphotostudio40 4 ปีที่แล้ว +1

    Nice video sir...&... thanks for sharing knowledge.

  • @AddFilmmedia
    @AddFilmmedia 6 ปีที่แล้ว

    I still get the "Calibrate"' button grayed out... Have installed the DJI Assistant 2 on my PC with Windows 10. I have restarted my PC, disconnected the drone from the PC, waited 20+ seconds before connected the drone to the PC. The software displays the Firmware on my Mavic, but as soon as I click the "Calibration" tab, and click through the 3 "Tutorials", I get the message that I need to reboot the aircraft. And keep getting that message over, and over again... Any thoughts?

  • @alwaystravelling100
    @alwaystravelling100 7 ปีที่แล้ว

    Good tip on screen resolution! Seems easy on a MAC. PC's running AntiVirus block Assistant 2 from downloading. Antivirus needs to be turned off first to allow it to run and install.

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  7 ปีที่แล้ว

      Graeme Heinrich DJI should make this process easier

  • @SeanOzz
    @SeanOzz 7 ปีที่แล้ว +1

    Keep the videos coming. Good stuff.

  • @JetStream2013
    @JetStream2013 5 ปีที่แล้ว

    I had found the best resolution as you recommended. I found out on-line that you MUST unplug any second screen.This got me past the greyed out calibrate button and the dots screen appeared. Have been through the dots screens processionals SIX + times and now at the end of the process it just returns to the first dots screen stage . I also had to do calibration for rear sensors. Thank you for an excellent video . I would be most grateful if you could suggest any solution. I am using the same 27" iMac as you. Regards. Laurie

  • @drone-works2922
    @drone-works2922 4 ปีที่แล้ว +1

    Thank you, this helped my.
    greetz from Holland

  • @עומרמזאריב-פ2ז
    @עומרמזאריב-פ2ז 6 ปีที่แล้ว

    What if i can see the green thing that the red one should be it i lifted the drone but didnt see the red one please help

  • @gionnirich
    @gionnirich 6 ปีที่แล้ว

    thank you for you explain !!! the tutorial is very simple to understand and great idea to add the subtext on the video !!!

  • @fredhoward5673
    @fredhoward5673 5 ปีที่แล้ว

    Many thanks for a really helpful and easy to follow vlog. Just had to calibrate vision sensor. First time I have come across this. Was cluless as what to do. But thanks to your video I have just completed re calibration. Many thanks for sharing your knowledge. Have just subscribed and look forward to your new vlogs and also look forward to checking previous vlogs. Many thanks and God Bless

  • @OutbackSPoT
    @OutbackSPoT 6 ปีที่แล้ว +2

    I did the calibration fine..front n bottom ok..waited 1 min then said it failed calibration please enter screen size in inches..24'' then screen goes white and n%o button seen to restart calibration.

  • @elminister5172
    @elminister5172 6 ปีที่แล้ว

    Good to know about the resolution setting. Thank you.

  • @omarmughal4084
    @omarmughal4084 2 ปีที่แล้ว

    I had a problem. After Calibration complete. Calculation 71 % and get the screen size error . I used 1600×900 resolution. Plz help 🥺

  • @rolyyify
    @rolyyify ปีที่แล้ว

    Evey time I turn on my dron it doesn't say it's connected why?

  • @tiendao2735
    @tiendao2735 6 ปีที่แล้ว

    Thank you. Your video has helped me with calibration.

  • @harolddasynth795
    @harolddasynth795 5 ปีที่แล้ว

    does this fix the VISION SYSTEM ERROR on mavic pro?i have this error now,mavic fall backward knee high..

  • @deanfairweather4748
    @deanfairweather4748 5 ปีที่แล้ว

    Thank you that was way better than the DJI ap..

  • @MrTaibanganba
    @MrTaibanganba 5 ปีที่แล้ว +1

    Sir, Calculating calibration information collected. calibrating...... it take much time n never end this process
    please help

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว +1

      Join Tech Drone Media Facebook group and post a video of what you see, then we might be able to help

  • @ImaginetMedia
    @ImaginetMedia 7 ปีที่แล้ว

    Excellent video. Thanks for sharing. As others have said, please take off the props before you do this.

  • @henryknight6603
    @henryknight6603 4 ปีที่แล้ว +1

    How often should I do this?

  • @johnmc7587
    @johnmc7587 5 ปีที่แล้ว

    Hi I've followed all instructions to calibrate vision sensors but when I go to fly it now my camera view has black and white diagonal lines where the sky should be. Any ideas how to fix this please?

  • @Andy-vt7sl
    @Andy-vt7sl 3 ปีที่แล้ว +1

    Thank you for this

  • @freemanwhite3
    @freemanwhite3 6 ปีที่แล้ว

    Thank You for this video. I subscribed. I really like the way you explain things.

  • @lucaghiotti2162
    @lucaghiotti2162 6 หลายเดือนก่อน

    bravissimo molto utile e semplice da fare ... grazie del tutorial

  • @zeycus
    @zeycus 5 ปีที่แล้ว +1

    I've been struggling with this, with no success. My Mavic suggests I calibrate the vision sensors, and gives me a warning, but this process is not working for me. At first, during the lateral sensors I was stuck because one of the parts was unreachable. I realized that this was because the rear legs were interfering, bending them I succeeded to go on. But after all the "ritual" is performed with no trouble, the message "Calibration information collected. Calibrating..." it gets stuck at 0%. I waited 30 minutes, it as no good. Anyone has this same problem? What should I do?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว

      Try a new cable?

    • @zeycus
      @zeycus 5 ปีที่แล้ว +1

      Tried two, no luck.

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว

      Not sure, what is going on, it can be tricky sometimes. Consider joining the TECH DRONE MEDIA facebook group, there are many bright minds in there :-)

  • @rustywp
    @rustywp 6 ปีที่แล้ว

    Good video, but my Mavic does not generate any red lines, so I cannot calibrate it. I am using the charging cord from an ipad.

  • @hugohelpt
    @hugohelpt 5 ปีที่แล้ว

    Thanks. My problem was the resolution that has to be 1600x900! After that it was a piece of cake.

  • @slaven101
    @slaven101 7 ปีที่แล้ว

    I've been able to get through most of those steps until the final one where I complete the calibration but when it starts calculating (i.e. at 7.11 minutes in your video), either it will seem to freeze at 57% complete and not go any further or will come up saying 'calibration failed' (despite the fact that I went through all the previous steps before and they seemed to work). Just wondering if you've run into this issue before and if you had any recommendations on how to fix it?

    • @TheIvanEpstein
      @TheIvanEpstein 6 ปีที่แล้ว

      same shit is happening over here in my Mac

  • @sanddune5k
    @sanddune5k 4 ปีที่แล้ว +1

    I just tried to do this and I’m stuck on the screen telling me to connect my drone to the computer. I’ve rebooted the drone and computer. I’ve also erased and re-downloaded the assistant 2. Same result. Please help. Thanks.

  • @dwequinephotography
    @dwequinephotography 6 ปีที่แล้ว

    thank you for your video, this was extremely helpful. I did all the calibration and it was a 100% successful but now when I restarted the aircraft it shows in the upper left corner "Aircraft Disconnected" and if you click on it then you come to the page Aircraft Status, and there you scroll down to Gimbel Status and it says "Gimbel Dissconected". any suggestion

  • @feydanmedia
    @feydanmedia 2 ปีที่แล้ว

    Mine is still greyed out unfortunately

  • @maslow_SAP_ERP
    @maslow_SAP_ERP 5 ปีที่แล้ว

    Great explanation. Keep up good work

  • @moimemesuis
    @moimemesuis 6 ปีที่แล้ว

    You save my life!. very good job!

  • @CoenCouwenberg
    @CoenCouwenberg 5 ปีที่แล้ว

    I finally got the DJI Assistant up and running, but one of my sensors is blinking?
    Does this mean it is broken? I just got the drone and it has naver crashed (yet). But there's no possible way it would be broken.
    Could it be a software bug and is it possible to repair it or is this covered in a warranty?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว

      Not sure I follow, jump into the tech drone media Facebook group and post short video showing the issue, thanks

  • @johnrennallc5423
    @johnrennallc5423 5 ปีที่แล้ว

    Nothing worked for me. I tried all different versions of this program and the only one I actually was able to open was the DJI Assistant 2 For Mavic v2.0.7 on a PC and I was able to get to the screen with the computer and cord to plug in. But mine didn't have any words under it like yours did and it didn't recognize the drone once it was plugged in. I tried changing the screen resolution. Still nothing. Any other idea

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว

      Have you tried at lower resolution?

    • @alnaee2634
      @alnaee2634 5 ปีที่แล้ว

      Same as me

  • @remaxtanzania5958
    @remaxtanzania5958 6 ปีที่แล้ว

    Excellent info. Thanks a million. You saved me

  • @karlo134652
    @karlo134652 6 ปีที่แล้ว

    i tried to recalibrate but it always say to reset the drone. I tried it 5 times. re install the software update both rc and the drone. but it always say the drone needs to be reset. did I miss something in the instalation?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  6 ปีที่แล้ว

      You need to restart after calibration

  • @johnallen5160
    @johnallen5160 ปีที่แล้ว

    thank you very much it is big help

  • @ese4368
    @ese4368 7 ปีที่แล้ว

    thanks you very much this was really helpful

  • @JohnODonovan1
    @JohnODonovan1 6 ปีที่แล้ว

    when you restart the drone at the end , must the drone be connected to the computer until the it restarts?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  6 ปีที่แล้ว +1

      I would believe so, but not sure as I always have it connected

  • @GoGettemWorldTv
    @GoGettemWorldTv 6 ปีที่แล้ว +1

    Thank You so much great info!!

  • @reamse4211
    @reamse4211 6 ปีที่แล้ว

    how to resart the aircraft ?

  • @junior2245
    @junior2245 5 ปีที่แล้ว

    You are awesome !!!!!! Thank you so much it helped me so much !!!

  • @piotrkalota529
    @piotrkalota529 4 ปีที่แล้ว

    Thanks man for help

  • @JimmyDickens1
    @JimmyDickens1 5 ปีที่แล้ว

    I tried to down load and run the DJI assistant 2 program, but my old (no longer used) desktop computer (Win 10) would not allow it. I know DJI was under the microscope for ties to China. How do you know you can trust the program and that it is not an attempt to load malware on your computer?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  5 ปีที่แล้ว

      DJI It's a Chinese company, so that pretty hard to avoid. I don't worry about that part, we are properly being watched by DJI, but if it's not China, then it US or Russia.

  • @ktoan2000
    @ktoan2000 6 ปีที่แล้ว

    I cant do that. It said "reboot you drone " :(( help me please

  • @matteaston9477
    @matteaston9477 7 ปีที่แล้ว

    Great Job. thank you!! well done

  • @Tracks777
    @Tracks777 7 ปีที่แล้ว

    Great! Keep it up!

  • @johnthornton8157
    @johnthornton8157 7 ปีที่แล้ว

    how often could you do this, would every 6 months be worth checking the sensors?

  • @sahinbirgin8511
    @sahinbirgin8511 6 ปีที่แล้ว

    Thank you so much about this video, its so helpfull

  • @RussellBond13
    @RussellBond13 7 ปีที่แล้ว

    I get to the last tutorial and it won't go further, it tells me to reboot aircraft but that doesn't help. stuck

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  7 ปีที่แล้ว

      Ian try and reboot your computer as well?

    • @RussellBond13
      @RussellBond13 7 ปีที่แล้ว

      I fixed, turns out there was a driver that didn't get installed the first time. Thanks

  • @MrLorenzoism
    @MrLorenzoism 5 ปีที่แล้ว

    i really appreciate this, thank you

  • @tasospsimopoulos142
    @tasospsimopoulos142 6 ปีที่แล้ว

    What do I do if it asks me the screen size and then it doesn't shows the pattern ?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  6 ปีที่แล้ว

      You need to try different resolutions

  • @yanivivgi4020
    @yanivivgi4020 7 ปีที่แล้ว +4

    nice job well done

  • @xukzALEXx
    @xukzALEXx 6 ปีที่แล้ว

    i turn the mavic on and plugged it in and the application didn't recognise it.

  • @adriancjones
    @adriancjones 7 ปีที่แล้ว +1

    Just what I was looking for. Thanks.

  • @aoody911x
    @aoody911x 6 ปีที่แล้ว

    Awesome, Thank you so much.

  • @horizontensloproducoes5071
    @horizontensloproducoes5071 6 ปีที่แล้ว

    It is normal to ask to tilt 90º ?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  6 ปีที่แล้ว

      Yes, the bottom sensors needs to see the screen

    • @horizontensloproducoes5071
      @horizontensloproducoes5071 6 ปีที่แล้ว

      Thanks for answering.
      At the end, the calibration calculation does not leave 0%.
      What could be wrong?

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  6 ปีที่แล้ว

      Jump over to the tech drone media facebook group and post a picture of the screen

    • @TECHDRONEMEDIA
      @TECHDRONEMEDIA  6 ปีที่แล้ว

      ⬇️ Join the TECH DRONE MEDIA Community on Facebook:
      goo.gl/EqcFs8