DJI Mavic 2 - How to Calibrate the Vision System Sensors
ฝัง
- เผยแพร่เมื่อ 19 ก.ย. 2018
- Make sure you are always checking your DJI Mavic 2 system status to confirm your drone is functioning properly. I've seen a few posts online regarding the vision system sensors calibration, so I wanted to help show you how to calibrate the vision system sensors on your Mavic 2 Zoom and Pro.
FlytPath Merch Store: bit.ly/2Nqi0oS
Optimize your TH-cam channel: bit.ly/2x6293B
DJI Mavic 2 Software Download: bit.ly/2xB2SKB
-----------------------------------------------------
▼I SHOT THIS VIDEO USING:
Video shot on: amzn.to/2vrTnx1
With this lens: amzn.to/2KwleRq
Audio Digital Recorder: amzn.to/2ydmXs7
Microphone: amzn.to/2oCAamj
Lav Adapter: amzn.to/2BRiU37
DJI Osmo Extension Stick: amzn.to/2Ac63sv
DJI Osmo Tripod: amzn.to/2gYnZ1C
▼ FOR THE BEST DEALS ON THE TELLO and MAVICS:
DJI Mavic 2: bit.ly/2BMohWC
DJI Mavic Air: goo.gl/mQMgi2
DJI Mavic Pro Platinum: goo.gl/fDNx1U
DJI Care Refresh: goo.gl/L4kTCW
▼ MORE GEAR I'VE REVIEWED
www.amazon.com/shop/flytpath
-----------------------------------------------------
▼ STAY CONNECTED
www.flytpath.com
/ aldryn
/ ace
/ theflytpath
-----------------------------------------------------
► If you found value in my video, please don't forget to give it a big thumbs up. If you have any questions, feel free to comment below. Thanks for watching and please don't forget to subscribe to be notified on new videos.
To view my fine art aerial drone photography and San Diego Aerial book, visit flytpath.com
-----------------------------------------------------
▼ MAIL TIME:
PO Box 502651
San Diego, CA 92150
-----------------------------------------------------
▼ Music by:
/ talagangsavage
-----------------------------------------------------
#mavic2calibration #mavic2 #hottocalibrate #justpostit
Just had a small crash of my drone during landing and got a small dent around one of the front sensors. I was able to carve out the plastic dent area with an Xacto knife but when I tried to fly again I got a sensor calibration error. I found this video and it was a tremendous help getting the sensors recalibrated. Now it works fine without a trip to the repair shop. You do a great job with your videos, extremely well produced and informative! Thanks from a loyal subscriber and looking forward to your future posts.
Unfortunate crash but glad my video was able to get it back up and running. I appreciate you taking the time to comment your experiences. Thanks Steven
thanks man, I took a crash and had to calibrate my front sensors... this made it MUCH easier to understand... keep up the good content!
Your videos are extremely helpful, very nicely presented with clear instructions, you have another subscriber.
Great job & keep up with these excellent, helpful videos.
Thanks for such a clearly done video. I bought a Mavic 2 Pro that didn't work after a mild crash. Replaced the 2 front arm/motor assemblies and a few other parts and got it to fly. Then the vision system calibration errors came on. Tried to do the calibration on my Mac and didn't work right, calibration window would not come up. Switched it to my Windows laptop and it worked perfectly. Took it up again for a test flight and flies like a new drone! No error messages and hovers perfectly. Thanks again!
Thank you. Calibration was quite easy and I was more confident at doing it for the first time after watching your video.
Thank you, thank you, thank you for this video.
Solved my Mavic 2 Pro problem here where apart from sports mode, it just would not move forward, all other axes were fine. Not sure if quick shot mode or any other features were effected or not, never tried it with it flying broken the way it was.
Found nothing similar for this particular model upon doing research but someone did have a thread on the forums about their spark behaving the exact same way and people unanimously suggested there might be a problem with the forward vision sensors.
Fairly painless, updating the firmware was a breeze too. The calibration process was easy and fairly intuitive with a constant tutorial graphic running on the left. What a relief, subbed !
Thanks Mate , helped me a lot , side sensor calibration as you said , was a little trickier, but it’s all about the angle. Much appreciate the tutorial. 😀
I plan on getting a Mavic 2 tomorrow at the Paramus NJ DJI store but I was completely lost when it came to this and had a ton of questions about this for the store staff. Don't need to ask now since you showed how to do it. Great job, Thanks.
Np thanks for watching
Great instructional video...it is trickier than I expected. I had a few restarts needed , however after a few attempts...it went perfectly. Thanks!!!
Thank you for your help and sharing your knowledge. I just got the exact same error last week so now I'll calibrate the sensors. Thank you again.
Thanks for the great demonstration. The tutorial was helpful. I did have issues with software at first coordinating with drone using Windows 8. Deleted first download, reloaded new copy and paid close attention to sequence of powering and connecting to software. It went well and no calibration error now being reported. I have Pro Platinum.
For those who have an issue with your monitor, I tried for hours with my Samsung TV monitors, I finally had to go get my older VGA monitor and connect a HDMI adapter to it, then and only then the calibration worked the first time!
Thanks for the detailed demonstration! I could do it exactly you showed! From Japan :)
Thank you for the video...Worth mentioning that I could not get the "calibrate now" icon to show, until I logged into my account. Small but important piece of the puzzle.
Very helpful as usual
Thank you for the demo and I found it very useful. Good job
Very informative, and made it super easy when it came time to do it. Thanks!
Man I'm glad no one saw me trying to do this before I saw this vid...thanks!
Likewise! I have never felt more incompetent.
Thanks Aldryn, just performed the calibration following this video and it worked perfectly....
Excellent presentation about sensors setting . Continue like this to make instructional videos 👌🏻 Yannick from New Caledonia
Thanks for watching
I have just done my sensor calibration on my mavic 2 pro after getting an error message for 2 weeks... bit hard to see square in checkered box... got it done.. rebooted the drone and controller... clear phone memory and it cleared the error message... thank you for your tutorial
Hey I had forgotten all about the screen calibration and was getting an error, I’ve had my Mavic 2 for almost 4 years I think. Just wanted to thank you for making this video!
Thank you for that OUTSTANDING Video
Thanks for watching
great helpful video.many thanks
Thank you a lot for your video. I had problems with the front sensor. Now It works great! Greetings from Switzerland.;)
Glad it helped
@@FlytPath please help.... after more than half an hour it stil says calculating to calibrate
Great tutorial Aldryn!
Great video, I was having a hard time myself calibrating my Mavic Air. I ended up not doing it but now I think I will give it a try again. I am not getting the error message but want to do it anyway.
Thanks for the excellent explanation .
Very helpful video. I was finally able to calibrate. vision sensors on my Mavic 2Pro after months of frustration.
Ok I struggled for the first calibration and I didn't even know that this type of calibration existed. Lol gotta wait till tommorow morning and do this reall quick. Thanks for the video man.
Thanks for watching
Thanks very good video really needed this one thanks again
Awesome vid man
worked fine for me, I did the calibration for my zoom on my 15 inch windows laptop, but I do recommend a larger monitor as I was almost bumping into the screen
Thank you very much mate very informative..👌🏻
Thankyou for your help, be so much harder without this video, made it so much simpler.
תודה רבה מדריך מהיר ברור קצר ולעניין
Thanks a lot very helpful
big helps thanks no more sensors problem
Cheers Mate!
Hi Great video I have a problem with sending pics from my controller to my phone it says its connected by blue tooth but don't send
Outstanding! .... thank you so much :)
Good job 👍
Thanks for the video very helpful.👍👍👍👍👍👍👍👍👍
Hi do you only calibrate when you get a display error? It's just that I don't think the downward sensor is working as I was trying to get it come on as it got close to me, is there a way to just test the downward sensor? Cheers great vid thanks daz
The Tri-pod trick did it for me! The movement error was DRIVING ME CRAZY!!!!!!
awesome man thank you earned a sub
hi , am a big fun and I really learn a lot from you. please I want to calibrate my sensors for Mavic zoom but , after the tutorial 4/4 ,the calibrate now button has taken more than 30mins . I can't proceed to the main calibration. what may be wrong ?
I was doing mine wrong the whole time. thanks for this Great tip.
How were you doing it?
super video, love this guy he knows his stuff especially for us newbs :-)
exceleeennntttt job
I gave up after trying several times. I got it to work thru the first one (at 90) then half way thru the bottom sensors, it stuck on the corner square and would never let me move the blue target into the upper right corner. Then it just froze on me. I closed the app and opened it again, then no matter how close I'd get my red lines to line up, it would never give me the blue target again. So frustrating. I turned my drone on and it was no longer showing the calibration error...that doesn't leaving me feeling confident about flying it now. BUT, your video was very helpful. Either it's user error or the software is simply lacking.
DJI software is always such a pain to deal with. They need to get stuff like this figured out better.
Great video
good informative video
god bless you
all thanks form India,Kerala
Another great and helpful video. Does it not ask to calibrate the top sensor or did I miss something? Thanks for keeping us informed.
Ya the top is not a camera sensor so you don’t calibrate it.
Any solve the "aircraft movement error"? I do exactly as this video suggests. I get the boxes centered but when I'm supposed to follow the smaller boxes around that error appears. I don't move the aircraft at all, I move it as if it is on a tripod. I've even placed the drone on a pillow for added stability...still that error. Any suggestions?
Btw -Flypath videos are by far my most favorite resource for drone info...Thanks for all you do!
I've asked a similar question to this on other sites but not received an answer. Do you think that the vision calibration has anything to do with the reported lack of precision landing with the new Mavic 2. This is the first site I've seen actually talking about vision calibration but there are several sites reporting on the lack of precision landing compared to the original Mavic pro.
not if i got a bad version of the dji asst but it doesn't of the calibration in it i have a mavic mini it does detect it and shows the current software thanks for any help you may have Thank you
Questions: Do you keep your RC turned on while doing this? and noticed no errors messages but side sensors are not functioning? Same process to fix or is there another way to activate? Thanks for any assistance.
Think I found the answer: -------> page 22 in the manual. It cannot sense dynamic objects, moving people, vehicles, trees etc. Only active in active track 2.0 and tripod. They DJI fooled me I t=really thought the sensors would work like the front and rear sensors.
does a curved computer screen affect it?
Could you please send the newest link to the DJI assistant 2 for Mavic. Thanks
hello sir help me....is need any calibration after replecment of dji mavic seris new motor? and also is need any calibration for new gimble at mavic 2 pro??
Aldryn, im getting a calibrate vision sensor warning on my mavic2 zoom. However, i use my 60 inch tv for my computer monitor. Do you know if this will affect the calibration process?
Thanks mate I’ll give it a go 👍
Thank you!
Hope it helped cody
awesome, thanks a lot!
Thank you so much for the tutorial. I haven't done this yet and had the drone for quite some time. Do I only need to do this if I get the error or is it recommended always? Thanks again.
Mostly when you get an error. But I like to do I at least once to know it’s calibrated anyways.
FlytPath great advice. Will definitely do it. Great channel bro! +1 sub.
Aldryn, I've only got once the warning about calibrating the sensors. But that pro 2 is long gone. I am waiting for my Mavic 2 Pro refresh to be delivered on Tues. As a precaution I was thinking about doing it right out of the box. Do you think that is a waste of time or a good idea. I think in the past I've heard only calibrate the sensors when asked. I don't mind, you make it look cool and fun. LOL. Please let me know as I live, learn and swear by a lot of your channel. Thank you. Tom
As always, found this video to be very helpful. Was wondering if anyone can help me understand the reasons because of which the vision sensors go out of calibration?
My rear sensor went out of calibration due to a crash, caused by a "stick error" condition. Once the "stick error" message went away, I assumed I was good to fly. I assumed wrong.
Hi, thanks for the video. Do you know why I cannot calibrate it? I cannot click on the button and I see that the Assistant is "thinking" and I cannot start the calibration :S any clue?
Why did you remove the propellers? Is that necessary or just something you do for safety? Thanks
Hey , Can we do it on a laptop? I dont have a pc and mac 🤞🏻
Awaiting ur response
is this applicable for M2EA as well ?
How do I save the course lock flight path so I can do a day to night transition hyperlapse?
Hi there, Question, the side sensors do not work at all on my mavic 2 zoom. all of the others work fine, should this calibration help? Please and Thank you
hi sir is the calibration is required an internet connection? i calibrate mine but it freeze when i complete all the vision sensor.
Is there a way how to calibrate gimbal camera lens? I have a problem with a blurry AF on my Mavic 2 Pro.
hello @flytpath i've a prob while caliberating my mavic pro that is everytime i click on caliberate now it says reboot your drone . can you help me to fix this
Are these sensors strictly for obstacle avoidance? If we are in the field, flying a flight plan in any app (such as Drone Deploy), over an agricultural field at an elevation higher than any trees, in the wide open, is there any need to react to this warning immediately?
I've only got and I pad air 2 can it be done on there?
Hi, congratulation for the video, Is It possible calibratrion the gimbal for the mini 2? After a little fall the horizon move to the left and to the right when I turn, a tecnic told me Is possible fix with a software. Thanks
I'm not familiar with the DJI Fly app but it must have a settings thing on the remote, go to the gimbal settings and there should be an option to calibrate the gimbal. Make sure the drone is switched on, connected to the remote and on the ground.
HELP ME PLEASE
Congratulations for your video more than exhaustive
I did my procedure for my mavic pro 2 just following your instructions I must say that first of all I don't find a double window like you in dji assistance 2 for mavic then once I finish the calibration procedure of all the sensors at the end of the construction of the log file the procedure rikane stops at 0% and is unable to close the procedure I was wondering if you could help me understand why this ever happens and possibly how I can solve it I state that like you I have both an imac and a notebook with windows 11 and on my imac I also installed windows 10 but with both the problem remains thanks for everything and I look forward to your info
minute 1:10 on your video i dont find the download option that you mention.
Aldryn. Does this work using a laptop computer...or just bigger screen?
THanks- that was helpful -- especially after my drone crashed (I use it for many clips on my channel)
Thanks for doing the tutorial - you make this look so easy. I'm using a brand new 15" MacBook Pro with Mavic 2 Zoom and I can't get passed lining up the red over the green squares on the 1st screen. The app just won't register and let me go further. My arms are shaking from holding the drone up for so long. Wow is this frustrating. At this point, I don't think I'll be able to complete the calibration.
Ya you just have to hold it back and not move the drone around. You just rotate it on it's axis.
FlytPath no I had a similar problem its the 90 degres to the left i had it to the right and nothing would happen it would just stay same colure but if left it works perfectly
I turned out that I was using the wrong version of DJI Assistant 2. Everything is fine now! Thanks!!
I don’t have the cable to connect the drone to the iPad, where can i get one?
Hey, Aldryn...
Where did you get the white desk that has your computer on it?
MJE ikea
Thanks
Still says leg not folded because the cable in the way. Do I cut the leg or the cable DJI technogy style?
my gimbal got fixed but the camera is still not balanced. does it have to do something with sensor calibrations?
Sir plz help i k trying to calibrate mavic air 2 but ig failed 20 times what to do. Plz help. And what screen size should we put i have a laptop 15 inch. Hp
I don't see the Red & Green lines on my Mac Book Laptop, so after connecting drone with USB cable, Do I need the Power ON the drone battery ?
Hey great channel... im having trouble with my mavic air 2 its keeps saying vision sensor blocked and imu calibration error is there any tips you can give me it will be much appreciated
Same issue
Like 👍🏼
Hej what do i do when the the mavic air does not appear in the ass2 window for vision calib. Thanks
Thanks! I just got the downward sensor Cal error. This hopefully helps.
Any idea why calibration gets knocked out?
Same issue
Hello
I just bought a Mavic 2 zoom with a huge expectation in my heart after seeing so many utube vids. I spent hour to calibrate compass , IMU and all software upgrade. But in my first test flight I just figured with the biggest disappointment that the side sensor of mavic 2 zoom do not work at all!! I tried also with tripod as I seen comments online and i toggle the button few times to set to Tripod mood but this shit just got crashed on to my living room's wall. Then I tried the vision sensor calibration which took so long to put all dots in sync that my battery died off. If all sensor don't work as they advertise it as omnidirectional but apparently it is not. Do you have any suggestion please?
The assistant program is showing the drone orientation to be horizontal (normal flight position) and it never shows placing it on its side on the tutorial. When I go to calibrate the sensors, there are two camera boxes that show what the sensors see. With my drone sitting in normal position, the sensor view image is rotated and not in regular upright manner. The. I get a prompt that tells me to rotate the drone to the left but it still shows the drone being horizontal. What should I do here?
I’ve downloaded the dji assistant 2 program, when the program is open, I don’t have any menu down the left hand side to select “calibration”.
And it not recognising my drone being plugged in.
can you help me . i try to this test and my drone doesn't emit any signal to the screen to show the blue and red lines whats that mean