when you replaced the cam roller for the pump, did you turn the crankshaft before pump installation? or just oil the roller, and slowly put the pump on?
What was the vehicle doing or why did you change the fuel pump? What code were you getting ? I'm getting PO191, replaced the fuel rail pressure sensor but didn't fix the problem. It's stalling at every traffic light. Saw a video with the same code and someone installed the high pressure fuel pump and that fixed their vehicle. Thoughts?. I am not a mechanic, so any help is appreciated.
I have the same problem with my 2013 reduced power and stabilize track light comes on...That sucka will go to California but soon as I stop at a red light reduced power pops on then stabilize track light comes on
It's OK to speak. Video's are more informative if the host includes commentary.
when you replaced the cam roller for the pump, did you turn the crankshaft before pump installation? or just oil the roller, and slowly put the pump on?
Oiled the roller and slowly put the pump on🤣
How long did this take you to change?
@@Sean26385 after doing 4 or 5 about 30-45 minutes. My first time I’d say a hour and a half
What was the vehicle doing or why did you change the fuel pump? What code were you getting ? I'm getting PO191, replaced the fuel rail pressure sensor but didn't fix the problem. It's stalling at every traffic light. Saw a video with the same code and someone installed the high pressure fuel pump and that fixed their vehicle. Thoughts?. I am not a mechanic, so any help is appreciated.
@@blackdiamonddetailingso you really don’t have to turn the camshaft?
What code was it getting if u don’t mind?
There could be 3/4 different codes. P0191 p228d a couple others, as well as other symptoms
What is the symptoms for replacement
Ecm light on, on and off reduced engine power, running after shut off many others lol
I have the same problem with my 2013 reduced power and stabilize track light comes on...That sucka will go to California but soon as I stop at a red light reduced power pops on then stabilize track light comes on
Horrific engine. Pure garbage. GM should be ashamed of themselves.
im more ashamed of myself for buying that POS equinox
GM's motto hasnt changed in decades and wont until shut down by the american people.
PARTS NUMBERS PLEASE
For the hp fuel pump?
@@blackdiamonddetailing YES ALL NEW PARTS YOU PUT ON IN THAT VIDEO. THINKING ABOUT CHANGING MINE AS WELL
@@chrisssmith3206 pretty sure the pump # is CHM10008 from autozone but the fuel line I have no idea its dealer only unless you reuse the old line
@@blackdiamonddetailing THANKS FOR THAT INFO, I REALLY NEEDED IT .
What camshaft flower did you use intake or something else
I hate 2.4’s lol