2016-2018 Kia Optima High Pressure Fuel Pump Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ต.ค. 2024

ความคิดเห็น • 17

  • @brandonmelvin5649
    @brandonmelvin5649 3 หลายเดือนก่อน +1

    Just did my Kia Sportage 2016 lx 2.4 motor thanks buddy same part and everything

    • @terryfelton6851
      @terryfelton6851 2 หลายเดือนก่อน +1

      Just answered my question. Just me now husband passed. Can I do this with my strong determination and will power?

    • @Mm.2112
      @Mm.2112 3 วันที่ผ่านมา

      @@terryfelton6851 Sorry for your loss, absolutely you just need the right tools.

  • @jeredhinshaw2903
    @jeredhinshaw2903 3 หลายเดือนก่อน

    Hello, great video. Kia dealership said oil is leaking into my fuel pump and its burning off through the exhaust. I'm going through a ton of oil. But they want to replace the fuel pump and a hose $2280😳 Im fairly mechanically inclined and this looks pretty straight forward with your help. But, which hose would they be talking about?

    • @ValleyMobileAutomotive
      @ValleyMobileAutomotive  3 หลายเดือนก่อน

      @@jeredhinshaw2903 Good question. On the one in this video there aren't any oil lines attached to the pump. Do they have part numbers listed on the estimate?

    • @Ricsar3
      @Ricsar3 หลายเดือนก่อน

      Replace the positive crankcase (pvc) valve

  • @terryfelton6851
    @terryfelton6851 2 หลายเดือนก่อน

    Is that the same as replacing one in a 2016 sportage

  • @Ricsar3
    @Ricsar3 หลายเดือนก่อน

    So...how do you diagnose if it need to be replaced?

    • @ValleyMobileAutomotive
      @ValleyMobileAutomotive  หลายเดือนก่อน

      @@Ricsar3 This one was leaking fuel into the oil. The customer noticed poor fuel economy.

  • @krystalgriffin3355
    @krystalgriffin3355 4 หลายเดือนก่อน

    The hard line where the gray piece want come off mine. How do it get off

    • @ValleyMobileAutomotive
      @ValleyMobileAutomotive  4 หลายเดือนก่อน

      The gray piece needs to be pushed in towards the line while pulling the line off at the same time.

  • @JayK-cc8cy
    @JayK-cc8cy หลายเดือนก่อน

    When removing the fuel part, I forgot to remove the 10mm bolts slowly and evenly. How screwed am I

    • @ValleyMobileAutomotive
      @ValleyMobileAutomotive  หลายเดือนก่อน +2

      @@JayK-cc8cy You are most likely fine. It's just good practice when anything is under spring pressure to release it a little at a time as evenly as possible. Same when putting it back together 👍

    • @JayK-cc8cy
      @JayK-cc8cy หลายเดือนก่อน

      @@ValleyMobileAutomotive thanks man, really appreciate your service to us

    • @NatronFatumallafalla
      @NatronFatumallafalla 17 วันที่ผ่านมา

      Putting new one on does it take time to start car? Or will it start right away...mine isn't starting maybe air in it? Ima wait awhile b4 trying again.....spark plugs maybe

    • @ValleyMobileAutomotive
      @ValleyMobileAutomotive  14 วันที่ผ่านมา

      @@NatronFatumallafalla It will run rough at first until the air is pushed through the lines. It should start within three attempts though.