I use a block of wood placed between the flywheel ring teeth and the transmission housing bolt, works great, no risk to anything as the wood absorbs the tension, and the shards of wood that come off are easily cleaned off.
Its sounds like that shop truly dont give a shit...that sucks man they giving you the run around...assholes...you did a great job.. you know it's great your papa is around, I just lost my papa and when used to work on my hondas all night he was always there by my side...its nice to see that bro..👍🏼👍🏼 many blessings
Hey serge dont feel bad I got a 6 pock ACT clutch kit with a findanza flywheel, and the clutch pedal is not as bad ,not soft not hard u know, good luck with everything great series this year big fan
Damn brotha, i feel ur pain. Its happened to me multiple times. Hopefully whoever it is that did u dirty will hook u up next time. I run ACT 6puk on mine and i love it but i understand we all got our like and dislikes. Keep up the awesome content.
So have you driven on the clutch yet? How were your street impressions? I ended up buying a puck clutch since it was a good deal.. but still going back and forth if i should get a full disk. I am also going to be running a 7.7 lb flywheel.. Afraid its going to be too harsh. Thanks for the advice!
Love the videos man keep up the good work! Any chance you’re gonna upgrade your intake manifold? You don’t feel like it’s holding you back a few ponies?
Where did you get your engine from?? Internet? Scrap yard? I want to do a built myself (k24) on my Civic. Inspired me so much... Can you give some tips where I can get all the stuff to get it swap and fully functional.
That clutch is used on pretty much every single build lht performance builds on the f20c engines kseries etc. And they have nothing but good things to say about it.!!
they use the fx300 which is the one i love, the fx400 is for builds that are making a bit more torque. Ive been driving it for a while now and its not that bad.
In search of a clutch kit for my k24a2..but a lot of brands (ACT, clutch masters, and Competition) doesn’t say fit k24a2...but it says it fit k20a2...soo do I buy a clutch kit for a k20a2 and would it fit my k24a2??
So normally you go with clutch master but wanted a disk clutch stage 3 , that's messed up i can see the disappointment in your face. But how did the pucked clutch do?
Your next video should be… “I fly down to Atlanta to help my fellow New Jersian with his frank swap” 😂
Just finished the whole series on the engine build, really helpful and detailed, great job
Great work. I'm excited for the motor install and first start up.
Good series, I already know about engine building but I view these various videos to learn about different engine types.
Bro women are like motors when the start smoking u replace them 💪🏻 great content brada
I use a block of wood placed between the flywheel ring teeth and the transmission housing bolt, works great, no risk to anything as the wood absorbs the tension, and the shards of wood that come off are easily cleaned off.
Its sounds like that shop truly dont give a shit...that sucks man they giving you the run around...assholes...you did a great job.. you know it's great your papa is around, I just lost my papa and when used to work on my hondas all night he was always there by my side...its nice to see that bro..👍🏼👍🏼 many blessings
Nice video bro I’ve watching you how you build that motor and the effort you putting it nice 👍 I’m in jersey as well
Just wanted to say thank you for filming this build. I know it was not easy but this is great content! Hope you continue with more detailed builds.
Great series thank u sir
Awesome job
Hey serge dont feel bad I got a 6 pock ACT clutch kit with a findanza flywheel, and the clutch pedal is not as bad ,not soft not hard u know, good luck with everything great series this year big fan
Pucks
Damn brotha, i feel ur pain. Its happened to me multiple times. Hopefully whoever it is that did u dirty will hook u up next time.
I run ACT 6puk on mine and i love it but i understand we all got our like and dislikes.
Keep up the awesome content.
J. Cheng act 6 puck unsprung all day 😎
Great stuff 👍🏼
Awesome video
They knew who you are. They was trying to hold you back on your project. I would of asked for the direct factory number. But anyways excellent work!
So have you driven on the clutch yet? How were your street impressions? I ended up buying a puck clutch since it was a good deal.. but still going back and forth if i should get a full disk. I am also going to be running a 7.7 lb flywheel.. Afraid its going to be too harsh. Thanks for the advice!
Love the videos man keep up the good work! Any chance you’re gonna upgrade your intake manifold? You don’t feel like it’s holding you back a few ponies?
this intake setup is killing my power lol unfortunately the setup i need to run is $$$$ so i just run this until im ready to go all out
Hey. If you could leave a parts list if everything you got in this build series, I would much appreciate it. I plan on following it entirely
Bro ur videos help me thanks
After some 4bangers production, b is for build, zosh, speed academy, vt Bobby finally tuning into sergmotive garage for the night
What about boosted boiz
Them too
Where did you get your engine from?? Internet? Scrap yard? I want to do a built myself (k24) on my Civic. Inspired me so much... Can you give some tips where I can get all the stuff to get it swap and fully functional.
Hey bro what's pulleys are you running? Having clearance issues with the crv post mount bracket.
idk what everyone’s crying about , I only rock ACT 6puck unsprung clutches on my hatches , not worried about pedal feel
That clutch is used on pretty much every single build lht performance builds on the f20c engines kseries etc. And they have nothing but good things to say about it.!!
they use the fx300 which is the one i love, the fx400 is for builds that are making a bit more torque. Ive been driving it for a while now and its not that bad.
@@SERGMOTIVEGARAGE I thought it was the 400 but hopefully you'll get used to it
That damper should be 181ft lbs torqued to spec. Not 111lbs.
Canmakid disal Eangin for Honda overhaul vidyo piles
What kind of torque wrench is tht ?
In search of a clutch kit for my k24a2..but a lot of brands (ACT, clutch masters, and Competition) doesn’t say fit k24a2...but it says it fit k20a2...soo do I buy a clutch kit for a k20a2 and would it fit my k24a2??
Let me know if the thrush stays intact...
Kral usta Türkiye Malatya Hikmet Honda
Fx300 still sprung? cause when I went to check still got springs in them
What pilot bushing if your using a k20 trans??
How is it holding up?
Can you drop the link for the arp clutch bolts I can’t find anything about them anywhere besides for b and d series
Can you say the parts for the engine cost ???
Nice build, I know this is old
Which belt?
Is crank from k20 or k24?
Serg, where in jersey do you live? What town?
What k20 head and what k24 block?
I’ve had bad experience with tristate also. I went all the way up there from NM to say where’s my shit?
So normally you go with clutch master but wanted a disk clutch stage 3 , that's messed up i can see the disappointment in your face. But how did the pucked clutch do?
You better do that damper again cause it takes alot more then what you did.
181lbs not 111lbs lol but hes good at these builds. Nobody's perfect
Hey man what half shaft are you using????
oem
SERGMOTIVE GARAGE how much hp beating can the oem half shaft take?
6 pucks are a junk design they always chip off the discs 😣
Im still waiting for hybrid Racing, 2 months in april 8... Shipping to Spain but 2 months???
Jona_ej2 buddy hybrid is the worst on shipping their parts on time ,always with the excuses ,my last order i had to wait 3 months and im in u.s.a
@@ramoncollazo1221 Well it's a shame they do not stock anything? I thought it was a "big" company ... Thanks for your answer!
Just wondering why didnt u install a twin disk?
thats way over kill for my build lol
I saw the video again and now i understand now why
Damn that really sucks bro... putting something in your build you dont even want.
Tri state lol
831vtc t2 gotta be !
That’s my guess lol
talk to much..just show you skill bro