How To Replace The Clutch On a 99-04 Ford Mustang

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 พ.ย. 2024
  • The 04 Mustang Is Back On The Road. This Video is Gonna Show You How To Get To The Clutch And Drop The Transmission We Don't Show You How To Put It Back Together Just Put Everything Back Together The Way It Came Apart.

ความคิดเห็น • 15

  • @fixingeverything1329
    @fixingeverything1329  ปีที่แล้ว +4

    Hey Guys I've noticed this video has helped a lot of people out and I'm very proud of that if you guys could I've noticed this video has 20k people that's watching and 90% has not subscribed or like the video if it's helped you in any way please take 2 seconds to like and subscribe so I can keep putting these videos out . Thank You All ❤

  • @davekalf5480
    @davekalf5480 2 ปีที่แล้ว +6

    Great video...thanks! I just replaced the clutch and rear main seal on an '03 with 3.8L.
    I found I had to remove the shifter 'fork' out of the transmission too. This made it easy to slide the tranny back. I left the driveshaft in the trans so no oil spilled.
    I used a ratchet strap to hold rear of driveshaft up.
    As he said in the video...remove trans from bell housing and then you can leave the exhaust system installed.
    Cheers

  • @foreignalex388
    @foreignalex388 2 ปีที่แล้ว +3

    I just worked on someones mustang and this video was great !! Appreciate it

  • @RickRad09
    @RickRad09 4 ปีที่แล้ว +1

    Great vidéo ! The infos I needed. Thanks ! How high the car must be from the ground for good clearance ?

  • @battldogeurmum698
    @battldogeurmum698 หลายเดือนก่อน

    Bold of you to say “clean work” with an interior that dirty. 😂

  • @israelsattleen
    @israelsattleen 6 หลายเดือนก่อน

    Good video bro

  • @jefflargo2195
    @jefflargo2195 2 ปีที่แล้ว +1

    You don't need take it off from the bell housing take the whole tranny of

  • @axtaxt2964
    @axtaxt2964 3 ปีที่แล้ว +2

    So we just aren't going to address the pilot bearing or the rear main seal?

    • @ob_gyn_inc
      @ob_gyn_inc 3 ปีที่แล้ว +1

      Or the fried pressure plate...or the clutch fork pivot

    • @kelpking4484
      @kelpking4484 ปีที่แล้ว +2

      Don't touch it unless it's leaking pretty self explanatory

  • @kraze2475
    @kraze2475 4 ปีที่แล้ว +2

    "Make sure it touches no metal"
    :puts it on the same side as the alternator

  • @alreyes525
    @alreyes525 ปีที่แล้ว

    Wow, this video wasn’t helpful. I was looking for a video on how to replace a clutch and it just shows the removal and not the replace part.

    • @fixingeverything1329
      @fixingeverything1329  ปีที่แล้ว +2

      Ha that's funny man so basic mechanic knowledge is the same way you took the clutch out is the same way it goes back in . Its probably best you take it to a shop if you are struggling to put the clutch back in especially since this video shows you the removal process. Thank you

  • @corychamberlain1
    @corychamberlain1 4 ปีที่แล้ว +1

    Outsyourway

  • @gregchapman7438
    @gregchapman7438 3 หลายเดือนก่อน

    Your hands don't match your voice