My DOLBY VISION HD FURY 4K DIVA settings + SETUP!
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- In this video I show you how to connect your HD Fury product to your components so that you can get Dolby Vision on everything!!
#dolbyvision #dolbyatmos #hdr10 #hdr10plus #hlg #hdr #hdfury #4k120fps #4k60fps #8k
Affiliate links mean I earn a commission from qualifying purchases. This helps support my channel at no additional cost to you.
--------- SUPPORT THE CHANNEL ---------
Emotiva Affiliate link: emotiva.com/?a...
Patreon: / hatoraidcowboy
Amazon affiliate link: www.amazon.com...
If you need premium Home Theater Seats, click on the link below!
Valencia Theater Seating
us.valenciathe...?sca_ref=1237051.IUTJ2FzGwq
Contribute directly via PayPal:
PayPal.me/hatoraidcowboycinema
Post a comment if you want to get someone from HD Fury on the channel! I’ve been reaching out but they havent responded.
I haven´t seen all you channel yet, but, is there some video where you compare the picture before & after HD Fury?
Thank you for watching. No, I thought about doing a video like that but decided not to do it as it would be impossible to see the differences on a compressed youtube video
@@hatoraidcowboy I got it. It´s a shame. I´m getting a LS11000 Epson projector, I think the HD Fury could be a great addition to improve the picture quality, but I would like to see in action before pull the trigger for the HDFury. Thank you!!!
Oh man that’s the projector I want soooo bad LOL. You will def see an improvement with DV over HDR 10….if you pull the trigger let me know!
This is exactly what I needed to see. I have the Vertex2, anthem 1120, Epsom 9400. thank you so much for this!
You’re welcome! Glad I could help. Let me know how it works out. Thanks for watching!
Worked a treat thank you mate. I asked you a question in one of your other vids re the projector out from your AVR, as I could not get that to work. But after a few reboots of all devices it now reads like your own info page.
I would certainly be interested in watching a chat with a HDFURY rep about finer tweaking. Thanks again 👍
@@markrfoster Awesome! 😊 Glad you’re all set up. Thanks again for the support. I will continue to reach out to HD Fury in hopes that they will agree to come on the channel.
Hell yes I would like to see a deep settings video with tips from the makers!
I reached out to them but unfortunately they denied my request….AGAIN
@@hatoraidcowboy that’s a bummer man! I was wondering if you think I could get dolbyvision material to play on my hdr10+ monitor with an hd fury dr. hdmi 8k?
@@jessedaly7847 LLDV should work on any display that does HDR 10(minimum) with an HD Fury and a device that does LLDV on the player…If your display does HDR 10+ then it can definitely handle the bandwidth up to 10 bit
Thank you after work tonight I will be setting it up 👍👍
No problem bro!
@@hatoraidcowboy got picture but the sound ist 2.0 and I'm just getting white noise thru my speakers
@@moveezy5591 What edid profile are you using? And what’s your setup chain like?
@@hatoraidcowboy using 10 the same one you used and my setup is emotiva xmc2 hookup to arc to my projector which is a optoma uhz65 theo hdfury diva hooked up to hdmi 1 of xmc2 and its ran into the arc of fury and then my components are hooked up on the other side of the diva ports 0 1 2
@@moveezy5591 There’s probably a setting you need to change on your receiver. The Fury should just pass through the audio. Do you have bitstream enabled on your receiver?
Definitely would like to see a definitive explanation of advanced features.
HdFury has continuously denied my requests for a livestream 🤷
Thanks Cowboy! Most coherent explanation I’ve found!
You’re welcome! Thank you for watching!
Thanks!
Thank you so much for the super thanks!!
Definitely I would like to see the finer features
Me too! I’ve reached out to them but they won’t respond. I’ll try again though.
I have wanted to try this but I just don't know how much benefit it will give me over the DTM of my JVC NX7. I have read NX7 owners impressions of this Dolby Vision hack. No one seemed to be blown away. Some people said they noticed some improvements in certain scenes. I should probably just try it😅🤣
@@keepingupwiththejones2933 🤣 Unfortunately I dont have JVC to do A|B comparisons with and without the HD Fury. The JVC could very well be better but idk. That being said, the only way to get DV on a projector is with HD Fury products. I think there are other products that can do similar functions but HD Fury’s have a TON of flexibility and control. You can also manually set parameters based on the HDR content and manually tone map as well but those functions are beyond me.
Hoping I can get someone from HD Fury on the channel to show how to use advanced features.
Yesssssssss!!! It would be fantastic
I tries the vertex 2 and lets say customer support was not the best. I ended up returning it to Amazon while I could. They had me connecting everything to the vertex than the audio to my receiver and the tv and projector to tx0 & 1 . That set up did not wirk well with my sound, when I had it. I am thinking about the diva because I really want this to work. I believe you have or had an epson 5040 projector as I do also the Marantz 8802a pre amp and two 8077 marantz amps. i was also using my reavon player. This time around I will connect the hdmi out on the marantz to the hdmi in 1on the divi and the tx0 to my projector. I am hoping this will keep my 7.2.4 audio the same . Any settings that you think I should make would be appreciated.
I dont really have any settings to recommend. I just use the presets for the LLDV. I’ve tried to get HDFury on the channel to discuss advanced settings but they decline.
great Video.
I'm One of Your Fans.
Thank you!
Love the videos. I have a setup similar to yours using a projector. A couple of quick questions - can you confirm that to get Dolby Vision you need to use either the HD Fury 4K Diva (like you) or the 8k VRROOM 40GBPS (which I have seen others use). Do any of the other HD Fury products also allow Dolby Vision for a projector (8K Arcana 2 VRR and 4K Vertex 2 seem to be similar boxes but are a bit cheaper). Also if I get this I assume I will need to get my Control 4 system updated by my supplier as I will now only be using a single HDMI in from the HD Fury box and don't need to use my AVR for spilitting the signal to the right source - Apple TV; Zidoo; XBOX? Thanks Phil
Thank you!
I believe all the HDFury products support LLDV. It just depends on how many hdmi ports you need.
If you go with a 4 port HDFury device you will not need a splitter as the HDFury will handle the switching. You can still use your AVR with the HDFury though. If using control 4 you would need to get with your dealer to integrate it into your system. Hope this helps!
Just came across your videos, what an awesome and thorough job you do with these. Keep it up and I will be subscribing! I have a JVC RS-520 (faux 4K, HDR10+) that I have been using for about 5 years now (on my second bulb) and I really love the projector and have thought about the new JVC laser models with dynamic tone mapping, but the cost is crazy now for projectors. I am thinking about an HD Fury DIVA for LLDV, all of my sources (Apple TV 4K Gen2, Panasonic UB820 UHD Player) support DV. I have been using the HDR tone mapping in the Panasonic UHD player but this seems like it could be a step up. It's not cheap, but way cheaper than buying a brand new projector :)
Hey thanks man, I appreciate your kind words and for supporting the channel! I’m glad I could help. 😁
I’m really thankful for these HDFury products. Now us budget projector owners can get DV 😄
I have watched your video and also reached out to customer support at HD and these are their instructions , "connect the diva hdmi 0 input to my AVR monitor 1 output, my tv to the tx0 output of diva, my projector to the tx1 output of the diva. This is all the connections that should be necessary" Your connections were different. Which are better?
That depends on your setup. Sounds like you’re sending audio separate from the video yes?
I wasn't planning on it.
As of right now my Nvidia shield and 4k Blu ray player are connected to my receiver if I decide to purchase a Diva they will be connected directly to the diva inputs. @@hatoraidcowboy
Yes please!
Thank you for the support!
How to hook it up only to a TV or projector too 4k player
Hi, what can the diva do which the vroom cannot do ?
Hello! The VROOM supports full hdmi 2.1 with 48 gbps. The Diva can only handle 18gbps
@@hatoraidcowboy but does the vroom lack any features that the diva has ?
Nope! They are both the exact same device except for the upgraded hdmi 2.1 features on the VROOM
@@hatoraidcowboy thanks for the information!
You’re welcome!
Thank you for these videos, I think I am closer to pulling the trigger. I am most interested in the DV capability since my 4k 82" Samsung TV does not support it. I currently have all my devices (Tivo, Nvidia Shield Pro, Xbox One) connected to a Caavo control center (which is really just an HDMI switcher) and then audio through my Yamaha receiver. Looking at the Diva, would this sit between the Caavo and the TV input or do the 3 devices have to plug into the Diva directly? I really would not want to lose the Caavo functionality as it is the only wife-proof universal remote I've found. Just wanting to make sure this will work with my setup. Thanks again, your videos have been super helpful.
@ John Clausing Thank you! Glad I could help. 😁 This is a good question. I dont have any experience with Caavo but I am familiar with it as I looked into it a while back…
My thoughts are that each device you are using needs to be plugged directly into the HD Fury so that the Fury can process the signal and do what it needs to do. You could absolutely plug the caavo into the HD Fury, but you would basically be only plugging in “one” device into the diva and I’m not sure how the Diva will interact. It “SHOULD” in theory, work the same way, if you’ll be using the caavo for the hdmi switching still. The HD Fury should still process the signal the same way based on the source, however I am not entirely sure as I have not tested this specific setup.
It looks like the caavo also supports hdr and DV, so my only concern would be that you may run into a double DV or HDR. But again I’m not sure. The only real way to know is to buy it and try it. If you run into issues then you can just return it. Hope this helps!
Happy New Year. Am I able to plug my Marantz Processor HDMI OUT to the Diva and then on to my Projector?
I don’t need it for my TV
If you go HDMI OUT has to go into a display. Either TV or Projector. The Diva just passes information. You’d either have to go DIVA directly into your projector and split the audio to your receiver, or go Projector to HDMI OUT on your receiver and use the DIVA on one of the HDMI IN’s and let your DIVA do the switching
Hi Cowboy, your videos are excellent, informative and easy to follow. Thanks for making them and please keep making them as I follow them diligently. I had a question whether any of the below setups would make a large difference one way or other:
Setup 1 (The one you showed in video): Connect all devices (Xbox, AppleTV, etc.) to HD Fury, connect HD Fury to receiver, and receiver to TV/projector. This means we just keep same settings on receiver and tv/projector and switch displays on HD Fury device.
Setup 2 (my preferred one): Connect all devices (Xbox, AppleTV, etc.) to receiver. Connect receiver output to HD Fury and then HD Fury output to TV/projector. This means we switch inputs on receiver and keep same settings on HD Fury and TV/projector, just like we did originally, without HD Fury.
Do you know what would be difference in picture/audio quality between both above setups? This will help me decide the option better.
For extra context, this is my setup:
Projector: Bomaker Polaris 4K (supports HDR 10)
Screen: Vava ALR screen 100"
Receiver: Yamaha RX-V6A (supports Dolby Vision, HDR 10+, etc.)
Speakers: Klipsch Dolby Atmos Reference Surround Sound System.
I’m not entirely sure option 2 would work. I think to get LLDV you need to have your video sources to be directly connected to the HD Fury. You might run into connectivity issues.
You could always try it and see if it works, but I feel like DV might have issues not directly connected to the Fury.
And thank you for your kind words!
@@hatoraidcowboy Thanks. And based on my setup posted above, which HD Fury model do you recommend? Choosing between Diva, Vertex 2 and Vroom is making my head hurt 😃
Lol Which Xbox & Apple TV do you have? Do you have any hdmi 2.1 devices? And are you planning on doing any 4K 120 gaming?
@@hatoraidcowboy Both latest. Xbox Series X, Apple TV 4K 2022 model, FireTV Stick 4K Max. And 4K 60 is a must but 4K 120 is not a hard requirement, just a mild preference if price difference is not much. My main focus is to get Dolby Vision quality picture on my HDR projector. Default HDR settings on projector are so bad that I just turn it off and keep SDR image
Will the HD Fury upscale better than the Sony XW5000 or the JVC RS1100/NP5?
Honestly I’m not sure because I dont have experience with those projectors, but the HD Fury is designed to enhance video…its a video specific device geared towards improving video so chances are it will do a better job upscaling since that’s basically the sole purpose.
Does the hd fury arcana 2 allow you to have dolby vision like the vrroom?
Yes. 😃
Would this work? Since I am not concerned about the plasma would it be better if I were to connect the plasma tv to tx1 output on diva and the projector to the tx0 output on diva? Also should I connect to the HDMI audio out output on diva to the receiver for sound?
I would only do that if you have legacy equipment that doesnt have arc. I dont split the audio. But that is an option if your setup needs to split the video and audio
I just ordered the diva. How would you make the connections?@@hatoraidcowboy
I have the benq x3000i projector and just ordered the hd fury diva i hope i see a diffrence with dolby vision
You should. What device are you using with it?
I have a nvidia shield pro, denon x3700h receiver and a xbox series x
@@leroywilliams1434 Noice. You’ll definitely see a difference with DV
Do the hd fury diva turn on and off with the receiver
@@leroywilliams1434 No, there’s no trigger output.
Having trouble with active hdmi cables. Left with no signal:/ any tips?
You’re using an HDFury device?
@@hatoraidcowboy yes I’m using the hdfury diva.
@@hatoraidcowboy and I use a shorter passive hdmi cable and set edid profile 10, the diva says he source is lldv and that it sends hdr to my pj, but my pj registers SDR… switching back to edid 11 brings back the hdr on the pj… I’m so confused
i have 5 projectors in the house but i mostly use 5040 and 5050(since 11-12ks were such a dissapointment) and was thinking of adding DV capability to those. Do you have an experience of comparing your Diva(or any HD Fury stand alone box) with PC with good GPU and MadVR software solution? Wonder if there is a difference in upscaling and 10+ or DV conversion and which looks better or works smoother?
MADVR would SMOKE the HDFury. HDFury doesnt have its own HDR tone mapping processing. Its just using LLDV and HDR+. HDFury also doesnt upscale. Its just passing through the information to your display
@hatoraidcowboy. Are you still using the Diva in your setup? I finally caved and picked up a used one so I'll check it out when it arrives next week.
Yup still using mine!
Hello
Thanks for the video.
2 questions
First how do you switch between source on HD fury (apple tv / shield pro/ ps5 / blu Ray player for instance)
Second questions what's happen and how do I configure if I have two output one is an oled tv which support dolby vision and another one is video projector supporting only hdr 10.
Thanks a lot
I’m using a Harmony Hub to switch inputs, but you can also use a phone or tablet by logging in to the WEB GUI.
For your second question, are you trying to use this with two displays?
I have a Samsung Q60T
Do you have an HDFury?
@@hatoraidcowboy I don’t know
This is good info. I have not heard of this product before. I wonder if you can use more than 1 input source and if it will work with a Sony 285es projector. Another thing is where can a product like this be purchased and how much does it cost.
Great Video.
PM
Thank you! Glad I could help. You can purchase off of amazon. There is an affiliate link in the description. Or you can buy directly from HDFury. This will work with any projector that supports HDR10.
@@hatoraidcowboy Thanks for the info I will take a look. My other question was will it work with more than one source ie if using NV Shield, Zappiti, Zidoo as sources.
Thanks
PM
The HDFury Vertex2, Fury & VROOM all have 4 hdmi in’s. So you can hook up to 4 different devices
@@hatoraidcowboy I found out that my Sony 285es already supports HDR10. So what would be the benefit for a device like this connected to a Sony projector?
You’ll be able to get Dolby Vision on your projector and get dynamic tone mapping.
I have a UST projector that supports Dolby Vision. Is there a way to bypass the LLDV when it recognizes a DV signal?
If your UST supports DV it should just pass the signal through. Or if you’re using a Blu Ray Player, you might be able to choose if you want Player led DV. If you select Player led it will use LLDV.
My Oppo gives me an option to use LLDV or regular DV. The Diva just passes the signal.
I took a look at the cost, and for something that may make a subtle difference, I’ll pass! At this point, you are the only one that I’ve seen to even mention this device.
LOL People have them. Not sure why no one talks about them. They are awesome little devices
@@hatoraidcowboy I just watched a video on it, from 2 years ago. You didn’t mention the small screen on the device itself. Is there more than one model of this device. I took a quick look on Amazon, and one was priced at $519, and another at $599. I watched a video on the new Marantz/Denon AVR line that will be coming out soon, and I have my eye on one of the Denon models (X3800h) 9.4 with 11 channel processing (Atmos, DTS:X, IMAX Enhanced, Auro3D, with Dirac upgrade. 4 independent sub outputs ($1499) the Marantz models price point were a lot higher. The equivalent to the 3800h by Marantz is $1999!
@@wendellwendellb339 Yea there is a screen, it’s an OLED screen. I dont mention it that much because it has a web gui which is the superior way to control the Diva. You really only need the screen when you first set it up to get the ip address.
@@wendellwendellb339 Yes they have multiple devices with differing functionalities
@@wendellwendellb339 Those new receivers sound pretty dope. I’d love to get one for testing. I have yet to experience an Auro 3D system or Dirac.
What if you want Dolby vision to show up when you’re using Apple TV?
It works the same. I get Dolby Vision on my apple tv 4K. But you have to change some settings in the Apple TV first.
@@hatoraidcowboy what are the settings to change? I hooked up the fury per your instructions and I just get a blank screen. I made sure I’m using the profile that shows HDR10 since my NX9 doesn’t do HDR10+.
Hi. My projector is Epson 2150 1080P no HDR10. Can I use this with Oppo 203 Apple TV 4K & Firestick? Thanks!
Hello! I think your display would still need to support HDR 10 since it takes the DV signal and sends it back to your display in an HDR 10 container.
Is there any benefit of the Hdfury vroom over a diva to pair with an ls12000? Is hdmi 2.1 the only difference (I don’t do 4k 120 fps gaming)
Yea hdmi 2.1 & 48Gbps speeds is really the only difference.
What if your projector itself does NOT have an arc or eARC support or input, but your AV, Denon in my case, supports ARC/eARC? How will the connection look like? Which input/output cable goes on what on HDFury/Projector/ AV, etc.? Hope I am making sense :).
Considering buying one.
Does your projector support HDR 10? You need a display that supports HDR 10. Arc is for audio
Yes, sir. My projector supports HDR 10. Yup, I want to be able to get eARC audio , Atmos , etc to my DENON. But I also need for video to be passed as Dolby Vision. So I guess I am asking with a projector that doesn’t support neither of these, how would I connect all these to make it happen.
My old projector, which I plan on sunsetting or gift to someone, had an HDMI ARC passthrough. So there was only one connection going from the HDMI, ARC enabled port from the projector, to my AVR’s ARC port. And then all other components, PS5, Roku , etc. are directly connected to the AVR ports and the video signals are passthrough to the projection, while Denon handles all the audio sequencing.
With my new projector though, I have no HDMI ARC port to set it up the same way, plus I would like the extra DV capability as well.
So how will everything look like connection wise for all these audio and video to happen?
The Diva, VROOM and Vertex 2 all have earc. So you would go from your HDR10 projector straight into the HDFury, all your video devices would plug into the HDFury, and then you would have a separate HDMI from the HDFury’s earc straight into one of your HDMI in on your receiver for the audio.
@@hatoraidcowboy Thank you, brother! That makes sense! I am going pull the trigger. Love your videos, btw!
@@hatoraidcowboy I don’t see any affiliate link for this unit on this video.
Got one?
Hi
Dr.hdmi 8k is cheaper, and you can achieve the same result. On top ist a hdmi2.1 device. Or am I wrong?
Looks like its still made by HDFury. They have a wide range of products. I need more inputs so this wouldnt work for me. But thanks for the suggestion!
Thank you for making this. Does the HDFury work well when you just want to use eARC from the HDFury to the receiver vs. putting the receiver in the video chain?
Oh I see what you mean. So none of my devices are Earc capable so I havent tried it, but it should work fine if you just want to send audio over earc to the receiver via the HD Fury.
@@hatoraidcowboy Thank you! I have a VRROOM showing up today so I will try it. One of the benefits I am looking to get from the VRROOM is to avoid needing HDMI 2.1 on my receiver. I can just run my HDMI 2.1 sources into the VRROOM and eARC the audio to the receiver, while directly connecting the VRROOM to my projector. Going to follow your instructions and see how the LLDV conversion looks on my LS11000 as well =).
@@tristanstoker233 Awesome man! I’m jelly I want the VROOM 🤣 I dont have any 2.1 components though so no biggy. Yea let me know how setup goes and how you like it!
I just noticed you said you have the new epson laser projector. 😮😮😮 MAD JELLY bro! Lol PLEASE come back here and let me know how it looks with LLDV & HDR 10+. This is the exact setup I want to test in my theater.
@@hatoraidcowboy Will do! I messed with it some Friday but it seems the VRROOM doesn't like my 15m RUIPRO cable so I have HDFurys in wall rated cable coming tomorrow.
Just found your channel. I just recently ordered an ls11000, Tx-rz50 and the vrroom. Couldn't you plug the devices into the receiver, then from the receiver to the vrroom and from the vroom to the projector? Any issues with doing it this way to avoid having to change my activities in harmony. Great content and info by the way.
Thanks for your kind words and for watching.
In order for the Vroom to work properly the devices need to be plugged directly into the Vroom. You can still plug the vroom into one of the receiver’s hdmi’s in and just use the Vroom’s hdmi switching.
@@hatoraidcowboy good to know. I should have everything soon and can start playing with everything. I'm watching a lot of your videos so I'm not going into this blind. I appreciate the help.
🙏 Thank you! Reach out to me if you run into trouble and need help. Congrats on all your new gear!
@@hatoraidcowboyThanks, I honestly feel like I just upgraded not that long ago. If I have any issues I'll definitely reach out.
So I set everything up yesterday. I'm not sure if I'm actually seeing a difference. For example, I tested John wick 3 with and without and not sure the DV looked any better or different. I wasn't getting hdr10+ as I don't think John wick supports it so it was just hdr and when I added the vrroom I got DV as the icon showed up but I couldn't really tell a difference unless I missed something. Hopefully I have time to mess with it today.
Will a HD Fury Diva get a Sony XW5000 (only HDR10) projector closer to the performance of the JVC RS1100/NP5 (HDR10+) projector?
My projector is HDR 10 only, so its limited by the bandwidth. But you will see better performance with LLDV because your streaming device or blu ray play will do the tone mapping on the device itself before the signal reaches your projector, it just gets sent back in an HDR 10 container.
So technically yes it will get closer because HDR 10 is static….it cant tone map dynamically on the fly, but HDR 10+ will still be a little better because it allows for more colors.
Hi Hatorid & Lat V,
Since you have Sony Laser xw5000es, Hatoraid would Lar V get the HD Fury Voorm which is able to do 18g and Full Dolby Vision and HDR 10+ as long as Lar V has the the proper cables to carry the signals to the projector?
Once Awesome TH-cam content Hatoraid 👊🏽👊🏽.
Also, please do a Harmony Remote control for you HD FURY. Thanks 👊🏽😉👊🏽
@@Lbmwm3 The Vroom can do 40 Gbps. 😁 I’m not sure I understand the question but for HDMI 2.1 you’ll need a hdmi cable rated for 40 Gbps support and 4K 120 to reap the full benefits of the Vroom.
And thank you!!
I’ll try to make a video with my logitech harmony settings.
@@hatoraidcowboy
Thanks a million 👊🏽😉👊🏽
Inspired by one of your earlier videos I bought HD Fury Arcana. I have an Epson 5050 and run Plex on an Nvidia shield, I see absolutely no difference in the image. I wanted it to work so badly but sadly I see no change.
Which Nvidia Shield are you using? Is it the 2017 version or 2019 version? Your PLEX client(shield) needs to have Dolby Vision support, as well as your movies and your receiver. Otherwise, yes you wont see a difference. The only device that doesnt need to support DV is your display since the HDFury will be sending the signal back into an hdr 10 format.
Also how are you ripping your movies? Makemkv? DvdFab?
@@hatoraidcowboy I'm using the Shield 2019 version and Denon 3700 and both of them support Dolby vision. I used Makemkv to rip my movies. Even the on-screen display of Arcana confirms that it is converting correctly. (422 BT2020 12b HDR). I confirmed it with the HDFury support on Discord as well. It's just that I don't see the difference. Are the changes really subtle?
@@ssr7631 It depends on how it was mastered. But also I have different video profiles on my Epson 5040. I have one color profile for standard HDR10, one for DV movies and one for DV gaming. I manually adjusted them myself.
It could be that you need to adjust your color profile for DV vs HDR10 if you havent done so already. But I can definitely tell a difference.
@@hatoraidcowboy I just have one color profile. Probably will look into how to create different profiles. Thanks anyhow :-)
@@ssr7631 Yea that’s probably the issue….DV supports 12 bit color vs 10 bit on HDR 10. So you’d need to adjust your display’s color for their respective content because once DV is activated your meta data has now changed.
I guarantee you if you are able to dial in your video settings you will be shocked at the difference. 😊
If this was free, I wouldn’t want it. The design is what I have a problem with. Why not make this in a 1u rack mountable box with all ins and outs on the back? I have enough cable management issues as it is...
@robognu5000 That’s fair. Yea it is a little inconvenient that its not rack mountable, but then again it doesnt require that big of a foot print. For me personally I care more about it’s functionality than the size.