Incredible. Made an appointment with my Ford Dealer to adjust the windshield wipers on my Ford F150. They told me I had to leave the pickup overnight. I look up the instruction on your youtube and the result was a 3-minute adjustment. Thank you for your help and site.
2021 F150 - Almost started prying and so glad I took the time to do a little research first and super glad I found your video... the wipers were way too far up from the factory and the driver's side wiper was banging against the windshield frame. I adjusted both wipers in about 5 minutes and they are now in their correct positions. Thank you for this video!!!
Video was a big help. I actually moved the wipers on my 2005 UP - they parked so low on the windshield they were below the defroster vents in the dash and would constantly freeze up.
Awesome Suggestion!! Ever since I saw your video on this mine has drove me NUTS being so high! Just adjusted them today and it looks so much better! Thanks for the Videos 👍🏼
Hi Trace, It’s unfortunately not working with me. I am missing the step after removing the wiper. I try to adjust it but it won’t go back in unless it is in the same position it was before. Did you adjust the metal base where the wiper sits at all?
@@arefjadallah6141 Hey man! NOPE! You don't have to make any type of adjustment on the base at all AS LONG AS the wiper looks the same as in the video with a Spline Slot assembly i.e. the stub with alot of little grooves in it haha. If it is the same as in the video I would just keep playing around with it until it drops into place on a lower level on the windshield that you prefer :)
Trace Staker thank you Trace! It looks the same. It’s a 2019 model. Tried 10+ times and it doesn’t go through until it’s back to the original setup lol. I’ll keep trying though. Thanks so much!
@@arefjadallah6141 there’s a small metal piece that’s going in a slot on the knob. I took that small metal piece out of the base of the wiper arm. Then it slid down where I wanted it to.
Worked on my 2022 After mine was 2 days in the dealer for the wiper recall they handed it off to me with the wipers way higher than normal Saw this video and I can’t believe how easy it was if i had called the dealer probably 1 more day for them to figure it out Btw it’s brilliant the little clip my Mazda i have to pull out ratchets and tools just to get them out
You need a GoPro that you can strap to your head or your chest. Then you can use two hands That would break my heart dropping things on my paint. Thank you for your videos. Can you put a link in here for the four scan for the one you changed you main screen. 🇨🇦
Thanks for watching Devi... a Gopro would be nice. Only SYNC 2 allows the custom background but here's a link to all the videos th-cam.com/play/PLzsDumyS9CXsRAUnLUrTU8KyR6pIRtpdD.html
@@zr2far This is what I was worried about. I removed it and finally my wiper doesn’t bang the frame of my truck. I was afraid it was there for a reason and removing it would somehow damage over time or it wouldn’t stay on.
It’s unfortunately not working with me. I am missing the step after removing the wiper. I try to adjust it but it won’t go back in unless it is in the same position it was before. Did you adjust the metal base where the wiper sits at all?
Ricardo's Workshop Trace Staker It’s a 2019 model. Tried 10+ times and it doesn’t go through until it’s back to the original setup lol. I’ll keep trying though. Thanks so much!
The keys are there strictly to speed up assembly at the factory. They act as a guide so the installer can slap them on in about 3 seconds instead of fiddling with the position. The only purpose the keys have after it leaves the factory
@@shanebrowning8862 The keys are there strictly to speed up assembly at the factory. They act as a guide so the installer can slap them on in about 3 seconds instead of fiddling with the position.
Nope! You're missing the shear pin so your video doesn't actually show how to adjust the angle, just a work-around for anyone willing to remove the shear pin.
Hi Michael Jaramillo, It’s unfortunately not working with me. I am missing the step after removing the wiper. I try to adjust it but it won’t go back in unless it is in the same position it was before. Did you adjust the metal base where the wiper sits at all?
Incredible. Made an appointment with my Ford Dealer to adjust the windshield wipers on my Ford F150. They told me I had to leave the pickup overnight. I look up the instruction on your youtube and the result was a 3-minute adjustment. Thank you for your help and site.
2021 F150 - Almost started prying and so glad I took the time to do a little research first and super glad I found your video... the wipers were way too far up from the factory and the driver's side wiper was banging against the windshield frame. I adjusted both wipers in about 5 minutes and they are now in their correct positions. Thank you for this video!!!
This has been driving me nuts, thanks for the the well explained and detailed fix Ricardo!
Video was a big help. I actually moved the wipers on my 2005 UP - they parked so low on the windshield they were below the defroster vents in the dash and would constantly freeze up.
Awesome Suggestion!! Ever since I saw your video on this mine has drove me NUTS being so high! Just adjusted them today and it looks so much better! Thanks for the Videos 👍🏼
Awesome! Thanks for watching!
Hi Trace, It’s unfortunately not working with me. I am missing the step after removing the wiper. I try to adjust it but it won’t go back in unless it is in the same position it was before. Did you adjust the metal base where the wiper sits at all?
@@arefjadallah6141 Hey man!
NOPE! You don't have to make any type of adjustment on the base at all AS LONG AS the wiper looks the same as in the video with a Spline Slot assembly i.e.
the stub with alot of little grooves in it haha. If it is the same as in the video I would just keep playing around with it until it drops into place on a lower level on the windshield that you prefer :)
Trace Staker thank you Trace! It looks the same. It’s a 2019 model. Tried 10+ times and it doesn’t go through until it’s back to the original setup lol.
I’ll keep trying though. Thanks so much!
@@arefjadallah6141 there’s a small metal piece that’s going in a slot on the knob. I took that small metal piece out of the base of the wiper arm. Then it slid down where I wanted it to.
Same thing fixes f250. Wiper was hitting my frame on driver side and couldn’t figure it out. Thank you for posting this
Worked on my 2022
After mine was 2 days in the dealer for the wiper recall they handed it off to me with the wipers way higher than normal
Saw this video and I can’t believe how easy it was if i had called the dealer probably 1 more day for them to figure it out
Btw it’s brilliant the little clip my Mazda i have to pull out ratchets and tools just to get them out
Thank you!! This was perfect. The car wash bent mine upwards and this was very easy to adjust thanks to your video.
This will work on the previous generation F150's as well. 2009-2014 f150's. Worked flawlessly on my 12'.
Great video.
Thanks for sharing.
New subscriber here
From Philadelphia PA
Mine have never come off that easy. I suspect there was a trial run. Good video none the less.
You need a GoPro that you can strap to your head or your chest. Then you can use two hands That would break my heart dropping things on my paint. Thank you for your videos. Can you put a link in here for the four scan for the one you changed you main screen. 🇨🇦
Thanks for watching Devi... a Gopro would be nice. Only SYNC 2 allows the custom background but here's a link to all the videos th-cam.com/play/PLzsDumyS9CXsRAUnLUrTU8KyR6pIRtpdD.html
It worked just like you said so thank you!
Thanks for the great video. My windshield wipers are way up for some reason. Been driving me nuts.
Thanks for watching Denny!
adjustment was very helpful
Thanks for watching Joe!
Thanks that was super simple.
You are awesome. Thanks so much. Can you or are you gonna do some Bronco stuff?
Yes... working on it
Thank you very much!...was driving me crazy
Did you have to redo it with that little key that basically falls out by itself? Some day you need the key others you don't.
I did not. But I heard some have a little key (more of a guide) for instalation purposes only.
The alignment key is used for production only. The alignment key does not need to be reinstalled.
@@zr2far This is what I was worried about. I removed it and finally my wiper doesn’t bang the frame of my truck. I was afraid it was there for a reason and removing it would somehow damage over time or it wouldn’t stay on.
Without the key the very fine splines on the inside of the arm socket will wear down and the arm will start slipping on the driver shaft.
Great video thanks a bunch
It’s unfortunately not working with me. I am missing the step after removing the wiper. I try to adjust it but it won’t go back in unless it is in the same position it was before. Did you adjust the metal base where the wiper sits at all?
No, i didn'tmove the metal gear. Just make sure that the clip is open and you over adjust a little.
Ricardo's Workshop Trace Staker It’s a 2019 model. Tried 10+ times and it doesn’t go through until it’s back to the original setup lol.
I’ll keep trying though. Thanks so much!
Thanks dude!!!
Thanks
The shaft key is missing ,do you see the slot where it goes ?
Sed... please define Shaft Key. Im not sure what you mean
There is a notch in the little gear with the teeth there is supposed to be a key in there. Not sure if I can reply with a vidjeo
The alignment key is used for production only. The alignment key does not need to be reinstalled.
The keys are there strictly to speed up assembly at the factory. They act as a guide so the installer can slap them on in about 3 seconds instead of fiddling with the position. The only purpose the keys have after it leaves the factory
Thanks! 👍
Thanks for watching Nick!
Good video
Useful, thanks
The key is missing from that square groove. That is what aligns the wiper and keeps it from moving. My keys on 2018 f150 fell out by themself!!!
Sorry everyone I was mistaken in that the keys are for production line alignment only and are not necessary.
Great info though. Thanks Gromer
Gomher not sure I’m buying that... Those splines do not look big enough to keep these from stripping w heavy snow on them...
@@shanebrowning8862 can confirm they strip. Mine just did yesterday. Now being replaced
@@shanebrowning8862 The keys are there strictly to speed up assembly at the factory. They act as a guide so the installer can slap them on in about 3 seconds instead of fiddling with the position.
Lower?? I want mine higher to keep them from being frozen all of the time.
Yours didnt have the key. That's why it was messed up.
👍
Nope! You're missing the shear pin so your video doesn't actually show how to adjust the angle, just a work-around for anyone willing to remove the shear pin.
Dealership asked for 132.00 diagnosis fee plus estimated 800 to fix
Fix for what?
@@ricardosworkshop they said my track was off on my wipers. All it was was adjustingike this video.
Wow! Glad this worked for you! Thanks for watching!
@@ricardosworkshop no problem and Thank you!
Hi Michael Jaramillo,
It’s unfortunately not working with me. I am missing the step after removing the wiper. I try to adjust it but it won’t go back in unless it is in the same position it was before. Did you adjust the metal base where the wiper sits at all?