How to change your chevy emblems from gold to black without replacing them

[@Mondo_0ne]

Exactly what I was looking for even the same roll of 3m vinyl thank you for not rambling about your dog getting married and your ex girlfriend getting ran over...

[@warcommanderpvp7586]

😂😂😂

[@brandonr9918]

You’re a monster. That marriage must be celebrated.

[@Tinnmann]

😂😂😂😂😂 that shit was funny

[@lemonpepper853]

Ex-girlfriend getting ran over is crazy. 😂😂😂

[@howardwear]

Short and to the point.... thank you. So many videos have so much extra that you do not need. This was spot on.....

[@Hdwrguy]

Dude! I watched someone plasti dip their emblems but this method looks so much cleaner and almost OEM. I am definitely doing this to my Chevy truck! Thanx for the video!

[@dmorgantube]

Straight forward and to the point. Thank you. I have a blacked-out Silverado. I think some chrome wrap vinyl on the bowties will tie in really nicely with the chrome accents on the headlights.

[@idonthurtfeelingsimurderth8972]

Loove this. So many people are saying oh you can by decals and stuff on the internet blah blah blah. Personally I love the extra work and the look of "I made this". All and all. Nice work dude...

[@alex-sd]

This was the best tutorial on this subject. Worked great on my Blazer EV. Thanks!

[@VinnySuccessJesusfam]

Nice..i bought a little can of rustoleum and used my kids water color pain brush and finished front and back in under 10 min..its been 2 years still looks mint..plus paint will last many years

[@steveng1624]

*This is really nice, looks 100% better my friend*

[@JaneDoe-vi5yc]

Thank you for a great video. I just received my gloss orange vinyl and I can't wait to do this to my two emblems.

[@KathleenBellDreamingofDIY]

I'm hoping to put orange vinyl on my orange Trailblazer's bow ties!

[@JaneDoe-vi5yc]

@@KathleenBellDreamingofDIY Do it! I get compliments on them, especially if I go to the Chevy dealer! I'm thinking about how to do the tiny bow ties that are on the rims. And the one on the steering wheel. !!!

[@KathleenBellDreamingofDIY]

@Jane Doe I am looking at those too!! Good luck!

[@xaverchabarria3773]

How long does it last on there before you have to redo it. Especially if you take your vehicle through the car wash.

[@claudiorojas6764]

Holy crap! I can’t believe this cost so much at the dealership!
Thanks I’ll never pay for this again.

[@chhayung6573]

Thanks for the video, it's very helpful. Have a quick question, instead of using a heat gun would a hair dryer be suffice?

[@jrvlogs9654]

Yes most definitely

[@ericmarrero5157]

Where did you buy the black film?

[@jrvlogs9654]

Amazon its just black vinyl wrap

[@tjmayer9103]

Plasti dip works better, faster & no cutting required. Just peel away for a perfect edge.

[@FA11ENNINJA]

Less material waste too

[@dmf2990]

Doesnt it come off?

[@tjmayer9103]

@@dmf2990 Nope. Mine has been on for 5 years and through many car washes.

[@FA11ENNINJA]

@@dmf2990 If you apply it correctly you won't have any peeling

[@kvngmuscle3003]

Vinyl is faster no masking and very minimal prep, takes less than 10 min if you know what your doing, and last way longer , I’ve had both and plasti dip requires minimal of 3 coats , vinyl is one layer and you don’t have to wait for it to dry.

[@todspeerii7498]

So like will you put a link in the description to the wrap that you used? I'm definitely doing this!

[@malibufitness615]

Think he is using vvivid lil wraps for emblems

[@charlesprovance570]

I used an old toothbrush to get down in the edges to get the dirt loose and then used a card to get down in there.

[@ethanmoore7095]

just ordered the same wrap bcause this video. preciate it man

[@jtd662]

Definitely will be doing this. Going to do mine in Chevy blue.

[@TomTRobot]

So much better! Apparently they started with that cheezy gold filling in 2000. Opinion: Nothing says tacky like fake gold. Hope someday someone at Chevy sees how many videos there are with owners going to the effort to change it and gets the message. It doesn't look so great in their ads, either.

[@kkoch666]

More people probably don't change it and just leave it alone

[@NotJustBBQLLC]

Finely as of 2019 no huge bow ties in the front and back of the Silverado’s

[@chadmark88]

"Chevy" HAS seen that people like the black bowties better - but GREED has set in and they now charge $295 to have a black bowtie put on the front and back - TWO HUNDRED NINETY FIVE DOLLARS to make it look just like the ones in this video !!! Thanks, J R Vlogs for showing us how to save $295 !!!

[@TomTRobot]

@@chadmark88 All the companies have their logos and markings locked up with copyright and trademarks so no-one legally make them aftermarket without licen$ing and you wind up stuck having to go OEM. I'll bet the stock bowtie isn't cheap, either.

[@CowboyBen]

im trying to do a black trim package on my 2008 silverado and was preparing to pay 50 bucks for new emblems, this is gonna save me some serious money

[@HuntDawg146]

Appreciate the video. How did this wrap hold up overtime?

[@darkseeker9548]

How well does that hold up in car washes?? Severe weather?

[@Jessa8891]

It's permanent vinyl. Holds up great.

[@anthonymacneil2279]

Wow, totally impressed, you did an excellent job and it looks like the factory. Many thumbs up👍👍👍. Thanks for sharing from Nova Scotia

[@ronaldtracy2534]

My daughter did this for my Christmas present and so far it is holding up great!!!

[@nomusicrc]

AWESOME JOB
Great video no music

[@pooperpeeker]

Did you use heat transfer vinyl or sticker vinyl?

[@joshua00022]

How durable is it? With washing, highway driving etc?

[@Drummer1570]

Can some please answer me this question!! How does it hold up in the long run? After washing it and different weather conditions?

[@kanais]

This helped my husband alot. Thanks!

[@GetIntoYourLife]

Good vid. Yours just rolled on easy, I got so many wrinkles and no matter how many times I tired it wouldnt wrinkle. 1. Will heating it up take out the wrinkles? 2. Will a high power blow dryer work? Or do I really need a heat gun?

[@jrvlogs9654]

If you heat it up and stretch it it will take out the wrinkles and a blow dryer could work too

[@GetIntoYourLife]

@@jrvlogs9654 Heat it up, pull it off, stretch it then press it on again?

[@TheSantos173]

JR VLOGS good stuff man, you know where I can get some of that vinyl?

[@fishnhomeylod462]

Nicely done. Takes some patience, I’m sure, but I’ll be doing this soon.

[@stevieb9728]

Link for that specific vinyl please

[@nosoupforyou425]

Looks good. Too bad my emblems are on the paint..... No way am I comfortable w/razor blading around Audi rings - will have to go plasti-dip. Prefer your way though as the material looks more durable

[@biodynamichawaii]

Nice job, well done. You have any ideas if a 2006 Silverado LT size front grill bow tie is same size as a 2018?

[@jrvlogs9654]

I think they are relatively the same I have raped and older 2005 one and it was actually easier that the newer ones

[@Coolruiz19]

How long did it hold up? Or it’s still going strong ?

[@jrvlogs9654]

Held up for about a year then I took it off to change the color of it I ended up wrapping it white as of now

[@Coolruiz19]

JR VLOGS Thank you man !!!!

[@jrvlogs9654]

No problem

[@tylercole8054]

How long has this last for you? Has it gotten messed up?

[@shawn3784]

Cool vid dude

[@robertoloyola9851]

What the Chevy bow tie texture? If so, How did you get it not to see the texture?

[@christinaday-bassett8399]

Does this work with red? I want red bowties for my black Equinox.

[@lotorres24pr]

I want to know if doing this, whenever you wash the car it’s not going away?

[@_mojojojeaux]

Have the same textured type embossed emblems (apparently some come smooth). How’d you get the vinyl to stick to both edges? Because there’s a two tiny indentations, one near the silver and the second is where the textured emblem goes smooth? I can’t get the vinyl to stick to that park

[@HiiiGHLIFE1]

I'm having same problem. It doesn't stick like this guy's did

[@carls2210]

Joneshia did you try using the heat gun while pushing down with your credit card or whatever you’re using to push the vinyl down? That’s what I had to do on mine. Took awhile but finally stuck.

[@Bored00m]

@@HiiiGHLIFE1 I am guessing he is using thinner vinyl? I use VViViD vinyl wrap and was having trouble getting it to stretch inside those grooves too.

[@dannyunger1618]

Awesome video! I hope it works on my truck!

[@rubensalais1502]

Looks really nice

[@grumpy1311]

Thanks for showing this!
It came out great!
I just did mine as you showed and they look awesome!
The factory ones are stupid expensive, this is a great alternative.

[@Grey4lif3]

Does it stay on?

[@grumpy1311]

@Alexx Yes ! It stays on perfect.
I have had it on my 2018 for 5 years now .
Trading the truck for a '24 GMC next week , and will be looking to black out the GMC emblems

[@kenna.9368]

Will a hairdryer work in place of the heat gun?

[@alfonsosalazar6316]

Please give us the amazon link of the vynil.

[@la_gallada_ruiz9818]

Looks clean 🔥

[@zombl337og]

I bought the front & back OEM black bowtie emblems, so much nicer than vinyl

[@jasminnn86]

can you leave a link to the wrap you bought?

[@jrvlogs9654]

The wrap I bought isn’t on amazon anymore for some reason but if you go on amazon and look up matte black car wrap and some should pop up!

[@JoseJimenez-xp2ym]

Nice job, thank. I do this looks nice.

[@rolandrodriguez7145]

Great job nice info

[@Fabgyrl86]

Hey, where did you get the material?

[@dzoni97a]

how durable it is? will it wipe off when pressurewashing?

[@ramzeneger]

More power and God Bless, Thank you for this video.

[@Italianborn]

Do you think it will be easy to do all the chrome badges ? Or just easier to de badge and put the black ones ?

[@Jessa8891]

Do not use peel and stick for all emblems. Plastic up is your best way to go.

[@gman77gas]

You can buy pre made pre fit stickets off ebay for cheap

[@guwap_6318]

where did you get these products if you don’t mind

[@Cole_T]

You deserve more subscribers than what you have 👍like the video!

[@Carlos-ms8zh]

Does it peel or ware off? Or if it rains will it get damaged?

[@satyrangel2730]

nice job thank you for the up load

[@Jamie2Starr]

I had my doubts, nice!

[@392_RHINO]

Do they make the vinyl in gloss black?

[@efunkyman6853]

Nice. Clean. Will do. Thank you!

[@mkaleta22]

Do I need a heat gun? Or can I get away with a hair dryer?

[@adamm8153]

Looks great!

[@nene7528]

Now I can do my own ..GREAT VIDEO!

[@marticiajojola9476]

Would glossy permanent cricket vinyl work?

[@Jessa8891]

Yep!

[@bw7505]

Nicely done

[@helton1628]

Professional, the best apresentation

[@c.torino2479]

Great video thanks man

[@ReyesPR]

Hey man what about the rain or water? Does affect?

[@jrvlogs9654]

No if you prep the surface good enough and make sure all the corners adhere properly than you will be fine

[@MADMAX839]

Well done. Thank you.

[@yousefhamdani1607]

Thank you 😊.. it's was great help

[@ruggedrickrude1946]

X-CELL-LANT JOB

[@andrewendicott3406]

looks really good. how has the film held up over time?

[@howardwear]

I have friends who have done it. If you run through a car wash once a week, his lasted a year with 3M film. Another friend only hand washes his, and still going strong. They did at the same time. Hope that helps.

[@kevinbradwell659]

Can you do this with a Toyota badge

[@hosscity7519]

What wrap did you use

[@clbergling]

Amazing incredible 10/10

[@charlesmiller3134]

What’s the material and where did you buy it?

[@Jessa8891]

Vinyl and he said Amazon.

[@jaasfamily13]

How to remove the black sticker if we want to switch back to Original Gold ??

[@Jessa8891]

Just peels off.

[@mrvang8077]

Ehh...it's OK. Matt black is kind of old school trend. I went with the gloss carbon fiber vynl wrap for added dimension depth. Which looks way cooler

[@pj9241]

Dude that credit card tip !

[@mistert7958]

Pure GM quality...a one year old truck! Does this work on rust, too?

[@Searcher159]

How does it look now, being two years old? Any issues?

[@jrvlogs9654]

Yea after about a year and a half it starts peaking but I just redid it

[@PAPATexas]

Nice

[@patrickjohnson7801]

Dude you rock

[@jrvlogs9654]

thanks

[@christophergrasse9346]

car u use a blow dryer ?

[@jrvlogs9654]

Yes that would work!

[@drchangtorres]

Nice dog!

[@vhdpchatterbox6176]

Thanks!!

[@IttyBittyGriddy]

Could I use my Cricut vinyl?

[@juanrounds]

I’m sure long as the adhesive is good idk why you can’t

[@elijahwilliams3186]

Did you ever get to trying it? I just bought the same stuff, iron on vinyl from circut. Trying to do my badges so wish me luck and let me know if you have any luck:)

[@davidboyce7996]

It looks better gold.

[@kmodek]

I just tried it and the gold shows around the sides. It's shit

[@soyeldiego86]

Make sure you use your AutoZone card- You wife's Costco or Macy's card will not cut it...

[@JoelHernandez-gx3fd]

No quema cuhhh 🇲🇽😂

[@justinh8464]

Great Vid, 👍👍👍👍

[@M0DFATH3R]

Nice!

[@retrographics6759]

How long did it last before it peeled?

[@mangoldengineering3134]

A foot by 5 feet? Umm let me guess, you tell your friends that you're packing a 8 incher?

[@ricktotz4078]

Why paint it it will just fall off anyhow just like the tailgate handle

[@billybritt5334]

I'm gonna try a mate black on the whole bowtie

[@tanman2813]

I don’t want any chrome showing gonna trey todo the whole bow tie

[@nofrenz2065]

Easier as well.