How to Replace Crankshaft Position Sensor 2011-2014 Hyundai Sonata

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com 1aau.to/ia/1AEC...
This video shows you how to install a new crankshaft position sensor from TRQ on your 2011-2014 Hyundai Sonata (2.4L L4). The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obAk/1A...
• 10mm Socket 1aau.to/obxr/1A...
• Trim Tool Set 1aau.to/oaqb/1A...
• Needle nose pliers 1aau.to/oHe/1AX...
• Needle nose pliers 1aau.to/oHe/1AX...
• Ratchet 1aau.to/obW2/1A...
• Socket Extensions 1aau.to/obUa/1A...
• Gloves 1aau.to/oaKn/1A...
• Safety Glasses
• Floor Jack 1aau.to/oao2/1A...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@zdenekmezl7755]

You say wiggle the sensor and remove it. Easier said than done, it is firmly stuck and does not come out like on your video. Also very hard to get a tool in there to force it out.
You make it look so easy😊

[@victornaja7927]

Hi what were the symptoms that led you to replace the cam sensor

[@user-pf7zt6nd8c]

Thank you engineer

[@zdenekmezl7755]

1:37