How to Replace Vapor Canister Purge Solenoid Valve 2011-2014 Hyundai Sonata

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ก.พ. 2025
  • Buy Now!
    New Vapor Canister Purge Solenoid Valve from 1AAuto.com trq.video/ia-1...
    This video shows you how to install a new vapor canister purge solenoid valve from TRQ on your 2011-2014 Hyundai Sonata. Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing.
    This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2011 Hyundai Sonata
    2012 Hyundai Sonata
    2013 Hyundai Sonata
    2014 Hyundai Sonata
    Tools you will need:
    • Phillips Head Screwdriver trq.video/obAj...
    • Pocket Screwdriver
    • 10mm Socket trq.video/obxq...
    • Trim Tool Set trq.video/oaqa...
    • Hose Pliers
    • Pliers
    • Ratchet trq.video/obWZ...
    • Gloves trq.video/oaKm...
    • Safety Glasses
    Subscribe: / @trq
    Check out our playlist:
    Hyundai Sonata 2011-14 6th Gen: • Hyundai Sonata 2011-14...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

ความคิดเห็น • 7

  • @TRQ
    @TRQ  ปีที่แล้ว +2

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @Cactus-rg1ip
    @Cactus-rg1ip 12 วันที่ผ่านมา +1

    Would be great if you guys did the same video's on the 2.0t as well and not just the 2.4.

  • @johndeal6505
    @johndeal6505 10 หลายเดือนก่อน +11

    Will this help with refueling? It will click after a few seconds of fueling. So it takes forever to refill the tank.

  • @DuWann876
    @DuWann876 2 หลายเดือนก่อน +2

    Where do i get the tubes that connects to solenoid ??

  • @Pyrofreek21
    @Pyrofreek21 2 หลายเดือนก่อน

    Any need to worry about any pressure or is it just air? I have to replace mine and I’m thinking about replacing it myself yes sorry if its a dumb question I’m a new learner lol

  • @CWTGD
    @CWTGD 11 หลายเดือนก่อน

    I fixed my car
    Thx!

  • @rogeliomorales1954
    @rogeliomorales1954 หลายเดือนก่อน

    Gracias yutubers benditas rredes sosiales exelente informacion continua por fabor ❤❤❤❤