Thank you this was very helpful! I must admit I was a little freaked out at 3:19, when I realized you have three hands...freaked out and jealous actually; there are many times I wish I had three hands when I worked on car engines too....ah nevermind Great video!
What about for a 2016 Hyundai sonata With the camshaft positioning sensor on the timing Chain cover does the timing need to be set to top dead center when reinstalling and reinstalling the sensor
My 2018 Hyundai Sonata check engine light came on yesterday and I had O’reilly’s but their testing machine on my car. The code it came up with was Exhaust Camshaft Position Timing over advance 1
No, the PCM (engine computer) will instantly receive signal when the vehicle is cranking, and then started. You may need to disconnect a battery to clear the check engine light though.
I have 2012 Hyundai Sonata 2012 2.4 Gd1 and engine is bad. I found a engine for sonata 2016 with 2.4 GDI , but one of the camshaft of the intake of the 2016 has different location of my 2012 engine My engine has the camshaft by the alternator (right side front of the intake and the engine of 2016 has the sensor I’m the front of the timing cover . Do you think is can install that engine with that different position ?
Will this cause a no start that will not crank over at all? Code p0014 or should I look at starter swapped blower motor relay with starter and still no crank over.probably both!
Thanks for explaining everything you do in detail. I have learned so much from watching your channel. Keep up the awesome work that you do.
Where you able to fix it?
The struggle is real, thank you
Thank you this was very helpful!
I must admit I was a little freaked out at 3:19, when I realized you have three hands...freaked out and jealous actually; there are many times I wish I had three hands when I worked on car engines too....ah nevermind
Great video!
What about for a 2016 Hyundai sonata With the camshaft positioning sensor on the timing Chain cover does the timing need to be set to top dead center when reinstalling and reinstalling the sensor
Thanks, you ever made that cleaning camshaft sensor video?
My 2018 Hyundai Sonata check engine light came on yesterday and I had O’reilly’s but their testing machine on my car. The code it came up with was Exhaust Camshaft Position Timing over advance 1
Did you ever find out what was wrong with it? Im having the same issue
Was the error code p0014?
Does the car need to be reprogrammed after ?
No, the PCM (engine computer) will instantly receive signal when the vehicle is cranking, and then started. You may need to disconnect a battery to clear the check engine light though.
I have 2012 Hyundai Sonata 2012 2.4 Gd1 and engine is bad.
I found a engine for sonata 2016 with 2.4 GDI , but one of the camshaft of the intake of the 2016 has different location of my 2012 engine
My engine has the camshaft by the alternator (right side front of the intake and the engine of 2016 has the sensor
I’m the front of the timing cover .
Do you think is can install that engine with that different position ?
Thank you. Real helpful save me $$$$
Will this cause a no start that will not crank over at all? Code p0014 or should I look at starter swapped blower motor relay with starter and still no crank over.probably both!
Does the 2012 use 1 or 2 camshaft sensors I got code P0355. Or just the one to the front of the car throws the code.
سياره سوناتا ١٢ أمريكي محرك جي دي بيه مشكله من ادوس بانزين بقوه السياره اجن ونوكف وتعت ونوب تمشي شنو السبب
I can buy a cam shaft sensor from the parts store like auto zone it doesn't matter does it
Is this for p0365?
i have this error code on my Hyundai sonata 2015. it reads camshaft position sensor A circuit bank 1 or single sensor. help me out
Did you figure out which one it was
Same. Any help?
Dope video
Thanks!
Yyyyyyyyyyyyyyyyyyyyyyyyyyy
Get some real tools!! They make socket wrenches with magnets now!!