Hi, Thanks for the above video. I have a Samsung PS50B850. For some reason I went into this menu (before watching your video) and pressed factory reset. What this has done is that it now only has Mode as ATV and RES: as No Signal. I cannot tune into any Digital Channels and this has pretty much made my TV a brick. Any suggestions on how to fix this? Thanks, DD
if you have problems with re tuning your tv then change the tuner and re tune, it should eventually pickup channels. i changed mine and it stopped working, went through a few of them and it finally worked.
it depends upon your region, wether your recording is enabled or not. Even if it is available you will not be able to transfer to any other devices like computer. It uses its own disk format.
Well thanks dude it worked for my UE46F6510 German/Austria/Swiss model,it`s worldwide,you can the local set to all most all countries US,Aus,Africa,India China Japan etc. I`m English so I changed it to EU-UK returned out the menus.Turned TV on its fine no problems so far,my year warrenty is nearly out anyway. It`s cool you can use Irish tuners like Soarview it`s cool I`m using Satellite/Freesat properly now. Not the original settings which was European settings Ger/Aus/Swiss.Great TV
...we tried going through the menu using the buttons on the TV itself, but can't find anything useful. The USB port itself isn't damaged at all (pins are straight, current is fine, checked through a volt meter). We ordered an official Samsung replacement remote that should be arriving in a day or so, so it's not a dire situation or anything, I was just curious if I could fix this issue a little faster before then. Any input would be appreciated! :) Thanks for the video, btw
I figured out if you set 1st_ Y_GH and 1st_Y_GL (in av result menu) to around half of each other with a good input signal in backgrond to keep an eye on the corrections( in my case i did it to 268 n 110), things look quite ok. and am happy with the result..try it out and lemme know
hi gud 2 get a prompt reply.. i had infact yesterday gone to the samsung tech support center and even they were unable to rectify it and suggested to get the board replaced...and as for firmware update I did that too but it was of no use to the problem
I have a Samsung SmartTV series 6 model UE40JU6000KXZF. It is stuck on one screen, downloading "terms of use". Can't access service menu. Info+Menu+Mute+Power doesn't work, I get a black screen. turning off and on again brings me back to "terms of use " download screen. can't go back can't go forward. Any idea of the combo sequence that would work on my model? Any possibility of reseting via HW?
Can you answer me? our tv model is w220-lcd3000 hitachi from Japan, then one day when my brother opened our tv. He saw the hotel mode menu, then he shut it off. After that we cannot open the tv anymore. It only appears color blue.. Its not working! What should we do?? Please answer. Thanks
Hi there, I've got a 55' F8000 series LED setup on my home HI FI. Every time I switch the TV on it goes straight in TV mode. What I want to do is for the TV to switch straight to one of the HDMI ports when I switch it on. How can I set this up to happen within the services menu?
Follow you instruction, got the setting screen, change the TV region then factory reset from menu, the TV now stuck in Samsun logo loop and cannot switch on, or off. HELP
thank you for your video, but it doesn't work for my tv i have samsung un55es6100 how can i display that menu. or if you have any hint to use an usb wirless adapter instead of the original wireless card that seems not working very well, i want to connect my tv to the wifi using an external usb wirless adapter. thank you
Hi Sbbastos, did you manage to get this fix to enable the RMC-QTD1 qwerty remote? I brought one from ebay and realised that it does not work for my model.
Hi, i have an samsung UA40ES6220R (thai) model tv. i was facing wifi connectivity issue and to solve it i did a reset from service menu. but later on i started tv the colors of the tv had gone and its not recovering back. could you help me out to get rid of this issue, now my tv is completely unusable?
Hi +Rex Knight... Yet my tv issue have not been fixed and I ma using it with 3d mode where almost it works fine. If u still need tv Settings I can sent it to u over mail.
Dear, how can i calibration my av? I heared there is a picture dor that. I messed up by pressing wrong button now i need to do a New calibration u can help me? I like ro hear from u
hi i wached your vidio and it was good because i did get into the sevice mode. but what i needed to if u can help with this is that i have a samsung ps42c450b1wxxu and the problem with it is that when u power it up it all comes on picture comes on but there is a horezotical black line across the screen and sometimes two faded patches that sometimes apears so im just wondering if i went into the service mode could i coure this falt and i need to no what to go into on the service mode. hope u can help with this.many thanks/
I have picture discoloration on my LN40A650A1F what do I need to do to fix this issue. When I turn it on the the color is distorted after it stays on for awhile it returns to normal. What do you recommend to fix this issue?
I have 2015 Samsung smart tv. i did a factory reset from menu, but now I have problem with initial setup. the setup hangs or freeze on step 4. i am in Africa Nigeria. ease assist
hi i have a samsung un55es7100fxza set on usa and need to set it to uk so i can pick up just the uk channels how do i get in to change it from usa to uk
do you know if it's at all possible to perform a factory reset on a Samsung TV (model LN40C530F1F) WITHOUT the original remote? I have an error code that won't go away ("New Device Not Found/USB1 Power Overload" in the bottom left corner of the screen), and we've tried firmware updates (via USB...the one that's causing the error message lol), hard reset by unplugging the TV, etc. Samsung customer service said to do the factory reset thing, but our dog ate the remote a few months back...
Unfortunatly i didn't, all i did was try to calibrate (Setting the numbers manually in the two lower menus) many times but i never restored its original status I'm waiting to for a firmware update if not i'll change the board I recommend you contact the tech support for samsung
My Samsung 43 plasma picture screen is out very slightly at the top. Noticed this on a lot of samsung tv through air signal. Drives me mad but don't think I will try this though because will prob end up making it worse.
Hi, I have a 55F8000 series. It only receive analogue TV broadcast. Is it possible that if I change the Tuner settings to DVB T2, will be able to receive digital broadcast. Or, the TV is totally hardware restricted. Also, I only accessed the service menu but never changed any settings. Is my warranty still VALID? Anyone with answers PLS!!!!
Hi, I have huge problem, I entered the ADC/WB menu and AV Caliprate.(It initially had "/" now has "Failure") Now the picture and colors for the AV & Composite inputs are all screwed (too Purble and bright). And when ever i try it again to fix it i keep getting failure, can you help me please, is there any way to fix this?
sir i have 42 inch Samsung smart led and it has suddenly powered off now when i plug in the power cable it just show (Samsung smart tv) and then go to standby mode itself and doesn't start and the remote dont work on it plz help me in my remote control there's no info button plz help
that exactly the problem ...ive already messed up the AV calibration and it shows failure ..and now the colours are a lot darker and as this hospitality tv was purchased from thailand so I don;t even have access to any other similar model TV... got to know about this forum avsforum.com/avs-vb/showthread.php?t=777497&page=4 trying to figure out if there is any solution to this issue
Hi. I trives to change the color picture on my samsung tv but now i think i have destroyed the picture behov Evelyn channel has a red color on the picture, what can i do so i can make to normal picuture?
Help, I have JVC TV 24'' and whenever I make any changes to QMAP Settings in factory settings it just won't save! Whenever I do anything it just goes back to where it was.. HELP ME I really need to configure some things!!
I HAVE A UE65H6400 SAMSUNG SMART TV, I DID A HDMI CALIBRATION BY MISTAKE NOW I WANT TO CHANGE MY SDC/WB SETTING BACK TO NORMAL CAN YOU GET ME THE DEFAULT VALUES PLEASE? REGARDS KEVIN
Good night ... I liked the video .. taught everything right, as I saved the settings but did a factory reset the control of the TV disabled as functions to increase and dimuniuir volume, back .. the standard of this secret menu? does anyone know?
D-series all factory options not available with "info,menu,mute,power"./local settings ,model.../ all options open only original factory remote controll.
You do not need to go into the service settings.. you need to change the settings on your computer for the scaling.. but i do know about the pink screen..
After Factory Reset change in Service Menu - "Hospitality Mode" from "ON" to "OFF". Turn Off your TV and after that all should work fine. My TV is (UE40D6510).
sir iam from india i purchased a samsung tv(model 32F5100).problem is when tv turn on it will not turn on for the first time after many trails and the plugs are disconneted and connected again it will turn on what is the problem plz help me
Well, fisrtable, i am mexican and i dont speak english very well. I hope you understand me ;) First thinf you got to do is cet an image with 4 squards, 2 black and 2 withe... put it in a usb..... Put the usb in a dvd player. Conected to your tv, of course and turn it on. Now turn your tv in service mode and look for ADC Target and put this values like this ; 1st_AV_High 880 1st_AV_Delta 1 1st_AV_Low 85 Now back and make ADC Calibration proof..... After that must apear the (4) b and w squard, and a little pink squard jumping on to them. Then you'll see calibration is succes. Turn off your tv and that it. I found all this stuf in a forum but i dont remember the link. Good wishes.
Stuck on Samsung logo as follws : Red light blink 3 times wit Sumsung logo Samsun logao goes off, red light blink 3 times, then pause for approx 10 secs. Then sequence repeat with Sumsung logo.
i have the d7000 modal are there also some settings about USB? i want to connect my logitech mini keyboard with the tv when i insert the usb wireless receiver i wont work anyone know maybe a way ?
hey friend can you help me ??? I made a mistake changing ADC/WB , ADC , AV Calibration and now all my channels see dark !!! I will thank you a lot any advice
Does anybody know how to fix a SamSung TV, when every time a channel is changed it "searches for signals" twice for about 5 seconds before it reads the signal? I went into the Mute 1-8-2 menu but didn't want to reset and couldn't find any settings to change HDMI input readings. Does anyone know the secret Easter Egg fix?
Dear Concern, I am facing a big issue on AV Calibration Failure Option is coming Kindly provide suitable solution for these issues my Tv Model No Samsung UA32ES6200 Pls do the needful . Thanks in advance
Hey!! I went into this setting mode and I did something I can´t remember but the sound went to Headphone mode how do I change it back? Thanks for answers
Hi ,I have a samsung TV similar to this .The problem is ,picture turns pink at times , I have to switch off n on again , than it shows ok , but after a while it is the same again . what to do if this happens again.
you cannot reset the hospitality settings.. you will need to copy the settings from another tv of the same model.. Be sure of what you do, or you might screw it badly.
hello, I have a samsung ue46f7000. after having access to the service menu, I performed a factory reset. but now problem! when I put the image in 3D and only in 3d, I said! I have the same problem. does anyone can help me to recover the original programs. please
Hi,
Thanks for the above video. I have a Samsung PS50B850. For some reason I went into this menu (before watching your video) and pressed factory reset. What this has done is that it now only has Mode as ATV and RES: as No Signal. I cannot tune into any Digital Channels and this has pretty much made my TV a brick. Any suggestions on how to fix this?
Thanks,
DD
if you have problems with re tuning your tv then change the tuner and re tune, it should eventually pickup channels.
i changed mine and it stopped working, went through a few of them and it finally worked.
Since analog TV signals have ceased, is there anyway to disable the ATV (analog) channels from service menu?
@saurabh459 if you have the 8 series it will be in the right hand side as you open the service menu. you need not go anywhere.
it depends upon your region, wether your recording is enabled or not. Even if it is available you will not be able to transfer to any other devices like computer. It uses its own disk format.
Well thanks dude it worked for my UE46F6510 German/Austria/Swiss model,it`s worldwide,you can the local set to all most all countries US,Aus,Africa,India China Japan etc. I`m English so I changed it to EU-UK returned out the menus.Turned TV on its fine no problems so far,my year warrenty is nearly out anyway. It`s cool you can use Irish tuners like Soarview it`s cool I`m using Satellite/Freesat properly now. Not the original settings which was European settings Ger/Aus/Swiss.Great TV
...we tried going through the menu using the buttons on the TV itself, but can't find anything useful. The USB port itself isn't damaged at all (pins are straight, current is fine, checked through a volt meter). We ordered an official Samsung replacement remote that should be arriving in a day or so, so it's not a dire situation or anything, I was just curious if I could fix this issue a little faster before then. Any input would be appreciated! :) Thanks for the video, btw
Thank you,after you get into the service menu,what exactly do you click?to get the usage hours?
I figured out if you set 1st_ Y_GH and 1st_Y_GL (in av result menu) to around half of each other with a good input signal in backgrond to keep an eye on the corrections( in my case i did it to 268 n 110), things look quite ok. and am happy with the result..try it out and lemme know
You make my day, thanks. I made reset and everything back to normal
hi gud 2 get a prompt reply.. i had infact yesterday gone to the samsung tech support center and even they were unable to rectify it and suggested to get the board replaced...and as for firmware update I did that too but it was of no use to the problem
I have a Samsung SmartTV series 6 model UE40JU6000KXZF. It is stuck on one screen, downloading "terms of use". Can't access service menu. Info+Menu+Mute+Power doesn't work, I get a black screen. turning off and on again brings me back to "terms of use " download screen. can't go back can't go forward. Any idea of the combo sequence that would work on my model? Any possibility of reseting via HW?
Can you answer me? our tv model is w220-lcd3000 hitachi from Japan, then one day when my brother opened our tv. He saw the hotel mode menu, then he shut it off. After that we cannot open the tv anymore. It only appears color blue.. Its not working! What should we do?? Please answer. Thanks
Hi there, I've got a 55' F8000 series LED setup on my home HI FI. Every time I switch the TV on it goes straight in TV mode. What I want to do is for the TV to switch straight to one of the HDMI ports when I switch it on. How can I set this up to happen within the services menu?
hey buddy did u get any solution to ur problem..cos i too have done the same thing with my TV and am facing the same issue...plz reply ASAP
@darcrow9 factory reset does not help with any changed settings in the service menu.
thanks bud for your help but not fast not slow it keeps entering on TV...the menu you show doesnt come up and i did it on my 40, 32 and 48 dad TV...
I have a Samsung LED UN65ES6500F Series 6, manufactured in 2012. This procedure does not turn on the service mode settings menu.
Can you please tell me how to change the bitrate of samsung smart tv.
Follow you instruction, got the setting screen, change the TV region then factory reset from menu, the TV now stuck in Samsun logo loop and cannot switch on, or off. HELP
@saurabh459 it will be in the right hand side of the general tab.
Hello can u help me to get original satting of my samsung led 55inch tv plz
thank you for your video, but it doesn't work for my tv i have samsung un55es6100 how can i display that menu.
or if you have any hint to use an usb wirless adapter instead of the original wireless card that seems not working very well, i want to connect my tv to the wifi using an external usb wirless adapter.
thank you
Hey I have reset my TV from the other remote and it's fixed now but plz can u help me with how do I make my touch remote working again
there's a method to install on UE40ES7000 (smart tv series 7) the new "smart hub 2013" without buy evolution kit?
The normal menu of the TV dismisses automatically after 30-60 seconds, I would like to change this, is this possible to do with this service menu?
hi there I have ive got a samsung UE46F6510 can you change the country setting on this because i have a european tv set?
Hi Sbbastos, did you manage to get this fix to enable the RMC-QTD1 qwerty remote? I brought one from ebay and realised that it does not work for my model.
Hi,
i have an samsung UA40ES6220R (thai) model tv. i was facing wifi connectivity issue and to solve it i did a reset from service menu. but later on i started tv the colors of the tv had gone and its not recovering back.
could you help me out to get rid of this issue, now my tv is completely unusable?
Last night...
Hi +Rex Knight... Yet my tv issue have not been fixed and I ma using it with 3d mode where almost it works fine. If u still need tv Settings I can sent it to u over mail.
Thank you bro .. You solve my problem :)
Keep up the good work
do you know how to put my own picture/logo after I switch on the TV? like you see at some hotels. thanks in advance
I don't have engineering tab. But expert tab is present, but inactive. How can I activate expert tab? Tv ue46es6800
Dear, how can i calibration my av? I heared there is a picture dor that. I messed up by pressing wrong button now i need to do a New calibration u can help me? I like ro hear from u
hi i wached your vidio and it was good because i did get into the sevice mode. but what i needed to if u can help with this is that i have a samsung ps42c450b1wxxu and the problem with it is that when u power it up it all comes on picture comes on but there is a horezotical black line across the screen and sometimes two faded patches that sometimes apears so im just wondering if i went into the service mode could i coure this falt and i need to no what to go into on the service mode. hope u can help with this.many thanks/
I have picture discoloration on my LN40A650A1F what do I need to do to fix this issue. When I turn it on the the color is distorted after it stays on for awhile it returns to normal. What do you recommend to fix this issue?
hi mate plz tell how we can do this with Samsung smart remote
I have 2015 Samsung smart tv. i did a factory reset from menu, but now I have problem with initial setup. the setup hangs or freeze on step 4. i am in Africa Nigeria. ease assist
Hi ,did you find the way to do it? I have a similar problem with an UE55F7000 - which i'm trying to configure to the italian digital provider.
thanks!
I need the type,tuner,front color for un58mu6070exza
hi i have a samsung un55es7100fxza set on usa and need to set it to uk so i can pick up just the uk channels how do i get in to change it from usa to uk
hi thank you..can you tell me how to change the samsung tv to get irish digital saorview
Hi, I want to buy a Samsung TV UE32EH5300 but there timeshift. Is there any way to turn on in the service menu? Thank you for your answer
do you know if it's at all possible to perform a factory reset on a Samsung TV (model LN40C530F1F) WITHOUT the original remote? I have an error code that won't go away ("New Device Not Found/USB1 Power Overload" in the bottom left corner of the screen), and we've tried firmware updates (via USB...the one that's causing the error message lol), hard reset by unplugging the TV, etc. Samsung customer service said to do the factory reset thing, but our dog ate the remote a few months back...
Thanks did a factory reset on my es5500 and got it connected back to the Internet again.
Works for Samsung UE50H6200 .
Info+Menu+Mute , in standby mode
Thanks.
Unfortunatly i didn't, all i did was try to calibrate (Setting the numbers manually in the two lower menus) many times but i never restored its original status
I'm waiting to for a firmware update if not i'll change the board
I recommend you contact the tech support for samsung
My Samsung 43 plasma picture screen is out very slightly at the top. Noticed this on a lot of samsung tv through air signal. Drives me mad but don't think I will try this though because will prob end up making it worse.
How can I adjust my judder reduction and blur reduction on mine? I don't see the option under picture settings.
Hi, I have a 55F8000 series. It only receive analogue TV broadcast. Is it possible that if I change the Tuner settings to DVB T2, will be able to receive digital broadcast. Or, the TV is totally hardware restricted.
Also, I only accessed the service menu but never changed any settings. Is my warranty still VALID? Anyone with answers PLS!!!!
I want to know my lcd tv 00465a when i want to open hdim always show me this source is is not connected please checkatrade try again
IS THERE A MENU FOR SUBTITLE SIZE BECOZ I CANT FIND IT IN TOOLS MENU MY TV IS F5000 LED
Hi,
I have huge problem, I entered the ADC/WB menu and AV Caliprate.(It initially had "/" now has "Failure")
Now the picture and colors for the AV & Composite inputs are all screwed (too Purble and bright).
And when ever i try it again to fix it i keep getting failure, can you help me please, is there any way to fix this?
sir i have 42 inch Samsung smart led and it has suddenly powered off now when i plug in the power cable it just show (Samsung smart tv) and then go to standby mode itself and doesn't start and the remote dont work on it plz help me in my remote control there's no info button plz help
I have a UN40D6000 and the info,menu,mute, power doesn't seems to work.. any suggestions?
that exactly the problem ...ive already messed up the AV calibration and it shows failure ..and now the colours are a lot darker and as this hospitality tv was purchased from thailand so I don;t even have access to any other similar model TV... got to know about this forum avsforum.com/avs-vb/showthread.php?t=777497&page=4 trying to figure out if there is any solution to this issue
what about the CE Dimming option, I´ve been reading that its something annoying for that series...???? any one has change those values????
Hi. I trives to change the color picture on my samsung tv but now i think i have destroyed the picture behov Evelyn channel has a red color on the picture, what can i do so i can make to normal picuture?
Marcelo, you do mute, 1, 8, 2 before powering on
BuickGeek24
i have one prob in 3dled samsung thir is power on and sound also working but no pic?????????
Help, I have JVC TV 24'' and whenever I make any changes to QMAP Settings in factory settings it just won't save! Whenever I do anything it just goes back to where it was.. HELP ME I really need to configure some things!!
I HAVE A UE65H6400 SAMSUNG SMART TV, I DID A HDMI CALIBRATION BY MISTAKE NOW I WANT TO CHANGE MY SDC/WB SETTING BACK TO NORMAL CAN YOU GET ME THE DEFAULT VALUES PLEASE?
REGARDS
KEVIN
Thanks Alot Man Helped Alot Thanks
Good night ... I liked the video .. taught everything right, as I saved the settings but did a factory reset the control of the TV disabled as functions to increase and dimuniuir volume, back .. the standard of this secret menu? does anyone know?
D-series all factory options not available with "info,menu,mute,power"./local settings ,model.../
all options open only original factory remote controll.
You do not need to go into the service settings.. you need to change the settings on your computer for the scaling.. but i do know about the pink screen..
thanks a lot from casablanca morocco
Hta ntouma hna lamgharba fine ma mchitti
THANKYOU THIS WORKED AWESOME
Can you help me by doing this my tv stop working
Can you please send me all the settings from the service menu.
After Factory Reset change in Service Menu - "Hospitality Mode" from "ON" to "OFF". Turn Off your TV and after that all should work fine. My TV is (UE40D6510).
sir iam from india i purchased a samsung tv(model 32F5100).problem is when tv turn on it will not turn on for the first time after many trails and the plugs are disconneted and connected again it will turn on what is the problem plz help me
@Chrissy3825 Since im not at home for a few days, im sorry. But will be delighted to help you as soon as i get home.
I have problem with my samsung 24" led
There is no option to play the videos
Well, fisrtable, i am mexican and i dont speak english very well.
I hope you understand me ;)
First thinf you got to do is cet an image with 4 squards, 2 black and 2
withe... put it in a usb.....
Put the usb in a dvd player. Conected to your tv, of course and turn it on.
Now turn your tv in service mode and look for ADC Target and put this
values like this ;
1st_AV_High 880
1st_AV_Delta 1
1st_AV_Low 85
Now back and make ADC Calibration proof.....
After that must apear the (4) b and w squard, and a little pink squard
jumping on to them.
Then you'll see calibration is succes. Turn off your tv and that it.
I found all this stuf in a forum but i dont remember the link.
Good wishes.
What about TV's that aren't smart the original LED
Stuck on Samsung logo as follws :
Red light blink 3 times wit Sumsung logo
Samsun logao goes off, red light blink 3 times, then pause for approx 10 secs. Then sequence repeat with Sumsung logo.
Is your TV d8000?
can you get to the menu without the remote?
i have the d7000 modal
are there also some settings about USB?
i want to connect my logitech mini keyboard with the tv
when i insert the usb wireless receiver i wont work
anyone know maybe a way ?
I have a sumsung 19 inch
how I can open service code ?
hey friend can you help me ???
I made a mistake changing ADC/WB , ADC , AV Calibration and now all my channels see dark !!!
I will thank you a lot any advice
Did you ever fix you mistake? did the same thing. .:(
@JordyBerg82 I guess you are out of luck. Check for the device's compatible list of keyboards.
How to fix cycling of colour....red green blue and white ....
what are your SVC settings can pic or video it plzzz
Does anybody know how to fix a SamSung TV, when every time a channel is
changed it "searches for signals" twice for about 5 seconds before it
reads the signal? I went into the Mute 1-8-2 menu but didn't want to
reset and couldn't find any settings to change HDMI input readings.
Does anyone know the secret Easter Egg fix?
im having problems getting on the internet with my samsung smart tv it showin im on the internet but still tellin me conect to the internet
Dear Concern,
I am facing a big issue on AV Calibration Failure Option is coming Kindly provide suitable solution for these issues my Tv Model No Samsung UA32ES6200 Pls do the needful .
Thanks in advance
Hey!! I went into this setting mode and I did something I can´t remember but the sound went to Headphone mode how do I change it back?
Thanks for answers
Hassan Masri
Hi ,I have a samsung TV similar to this .The problem is ,picture turns pink at times , I have to switch off n on again , than it shows ok , but after a while it is the same again . what to do if this happens again.
+arumugam samy looks like t-con board needs replacing.
Hi Jose ,, Great thanks for your swift reply
If anyone has a ku6290 4o inch. if anyone happens to look into the service menu could you tell me the defaults under "type" and color space.
Thank you!
you cannot reset the hospitality settings.. you will need to copy the settings from another tv of the same model.. Be sure of what you do, or you might screw it badly.
pic is coming but no light show like dark
Thank you.
hello,
I have a samsung ue46f7000. after having access to the service menu, I performed a factory reset. but now problem!
when I put the image in 3D and only in 3d, I said! I have the same problem. does anyone can help me to recover the original programs. please
sorry, my problem is a solarized Distorted
I changed smth in Service settings and now my remote dont work in service mode Ive changed model and smth more how can i restore my service settings
please,
can you give me the parameter of origin, will be really nice. 3d no longer works
thank you in advance
In service Mode:DTV, RES : NOTSUPPORT
UE46ES800
Thank you
why doesnt anyone go to the EXPERT..isnt this where the calibrations are done?
how should I disable my game mode??