Thanks, I had to find the new versions for the polaris bios builder and the driver fix tool but it worked like a charm. When from 24 to 30MB in just a few minutes. It even improved the kawpow hashrate, going from 10 to 14Mh. Thanks a ton
Very helpful video! Thanks a bunch dude! Using Polaris with the one touch patch gave me only an extra 1.1MH but it's an extra 6.6MH on my 6 gpu rig. Even better though, it dropped the temperature of each card by 3-5 degrees. And power dropped by 10-12W per card saving me an extra 60+ W overall! So you get better hashrate, cooler gpus, and use much less power with this method. Subscribed and liked :)
I wonder why this process increased the wattage on my 2x rx 580. Today I bought a 3rd rx 580 and was surprised that it runs at 29 MH/s and at 80 Watt, while mine worked at 120W. So I thought I'll try overclocking. now I get 28MH/s on my 2x rx 580 bout 130 to 140 watt each. weird..
yess you go ahead and post this video i go ahead and watch this video i then go ahead and look for rx 580 then i go ahead and buy rx580 then i go ahead and watch this video again then finally i go ahead and mod my bios perfect tutorail well explained and thanks for getting me 31.9mhs
Thanks for this video. A couple of the links weren’t right but easy enough to search for. I’m running in Linux and haven’t overclocked in simple mining but I have an increase in 5 MH/s (from 24ish to 29ish) after following your instructions. I’ll try the overclock in simple mining tomorrow.
Wow this was an adventure. You know what youre talking about i only messed up by getting freaked out by the non supported graphics through the graphics card. So once i plugged into my motherboard for display i was okay. Although my BIOS and Video/graphics drivers were reset it seems. Even though only one of my bios settings changed i had to restore the motherboard BIOS then change back to my mining settings. Thankyou for warning people about bricking also.
Thanks for the video.. Have a MSI RX 580 Gaming X 4 GB and it brought me from ~23 Mh/s to ~27 Mh/s and I’m not using blockchain drivers because I also do gaming.. Increased memory speed from 1750 to 1850 to see how if it’s stable. It will be nearly impossible to get over 30 Mh/s on ETH because EPOCH is 206 and mining difficulty is higher. 30+ Mh/s will be possible on crypto based on ETH blockchain. For instance, Ubiq. Ubiq is on EPOCH 19 so mining difficulty is low compared to ETH.
Excellent video pal, just wanted to know about the power comsuption when running at 31 mh/s, is it higher than expected or an under volt tweak is required ? Thanks!
rx580 - samsung 32 ??? my asssssssssssssss, lets see a fallow up video where u had it runing for 24hours uptime to start but 3-5 days whould be ideal and while ur at it load HWinfo and shows us the memory errors if any
Whats the problem?If you're insinuating that 32 MH is not feasible with an RX580 (w/Samsung memory).....you've either never attempted to overclock one of those cards or you dont know what you're doing when you do try to overclock it. Because 32 mh is easily attainable with most 8 GB RX580's. I have (8 gb RX580's) - Sapphire Nitro+ (Samsung/Hynix): 33.1 mh (Stable for 11 months) Sapphire Nitro+ (Micron): 32.2 mh (Stable for over a year) (2) Sapphire Nitro + SE (Micron): 31.8/32.6 (Stable for between 4 months & over a year) (1) Sapphire Nitro+ SE (Samsung): 32.2 (Stable for 11 months) (1) PowerColor Red Devil (Micron): 33.1 (Stable for close to a year and a half)
@@undergroundmx934 i have rx480s and rx580s from asus and 580s with mem clock so high throw a lot of memory faults. As well you should not only look at highest possible hashrate but for most efficient operation(if you pay electricity). I find my best settings to be in a range 29.5mh for 580s and 29.3 for 480s where it uses 30% less electricity than with settings like in this video. But yes it is possible easily hit 31-32mh range but is not worth it because temperatures are much higher and you stress your cards
@@darko6075 my cards doesnt crash but throws a lot of mem faults. and if I supposed to choose 32mh with 100% electricity or 29.5mh with 70% of electricity with no mem faults at all I go with lower values
is not hard to do it,im a noob with this things but i have a question, i have an rx580 sapphire oc pulse 8gb 256 /im not mining ,only gaming, if i do that thing will improve my gpu performance or what? :) and will afect my gpu in time?
i went from 20mh/s with my 580 8gb to 7.5mh/s then i put the stock bios back on and every benchmark is failing and saying error on nicehash with no overclock and with it. this has completely messed up my graphics card!!
you have a button on it for the second bios. Use the second bios to reset the card. First you need to find out what type of memory you have since if you use a bios for samsung memory when you have micron you will fuck it up. Pretty sure that's why you bricked it.
Good thing we live in a time period where people dont have to take responsibility for their own actions. You attempted to do something that you know nothing about and ended up ruining your gpu...........who's fault is it??? Obviously its @DOUBLEDOWN 's fault. Yup, you're not responsible for your own actions. If something goes wrong.......blame someone else! SMH
I got one flashed and now no signal from booting just black but it’s running fine… just took a bit to go past the debug lights.. tried restarting it again
Hello brother, Please help me, I follow everything in this tutorial after I restart the pc. It crashed, When I reinstall the windows and put the gpu on it also crashed. Please help me.
I have a gaming x rx580 4gb and it’s only doing 2.04 MHs...The Polaris flash also doesn’t have the one time clicker. It looks completely different from what is shown here :(
@@Antonio-vr5ro there is actually a better way if you look for the different mining straps you can modify it that way without having to patch the graphics card
im trying this over because my GPU randomly hash 16 each now, but when I go to mod them again it says "This GPU is already modded" when I press program on ATIFLASH. What Can i do?
I have 31MH/s just by flipping the bios switch located on the RX580 card next to the power input on top of the card. I broke the seal on my cards so I believe they are new and I've never modded the bios. Should I mod it and get more or should I just leave it alone? The switch boosted me from 26 to 30 then I set clocks at cc1150/850 and mem2060/1060 I'm getting 31.12 MH/s and about 88 Watts and it stays less than 50° with a huge fan on top. I really am curious if this card can go faster or should I just leave it alone?
Is 32 MH/s the max for the RX580 ? I don't want to mess with the bios for 1 MH or less. DO PEOPLE KNOW ABOUT THE PERFORMANCE SWITCH ON THE CARD? The switch is located in the top of the card, very tiny switch, next to the power input on the top of the card. No bios mod needed.
So i already got a rig running 5 cards: 3x RX580 strix 1x RX480 8gb strix and 1x 480 8gb Sapphire Nitro and they all do around 27mhs without bios mod..If i want to mod bios i need to turn everything off and do bios mod on one by one and then reassembly whole rig all over or? Can i mod while they are on risers or it needs to be in pcie 16? I would just plug them all off and go 1 by 1?
On my rx 580 nitro plus sapphire i actually have a pshyical switch to turn on mining/performance/overclock mode however you want to call it and i get 30 mh/s
@@krish6140 Its pretty significative, because you will actually have to change your graphics card processing type from graphics processing to cumputation, and that will plummet your fps gains to maybe half in every game
Thank You ! You explained it perfectly. I gained over 11 MH/s and about 100% stress relief, lol. I wish you positive vibes and great success : )
now how much mh you are getting after this
Thanks, I had to find the new versions for the polaris bios builder and the driver fix tool but it worked like a charm. When from 24 to 30MB in just a few minutes. It even improved the kawpow hashrate, going from 10 to 14Mh. Thanks a ton
Very helpful video! Thanks a bunch dude! Using Polaris with the one touch patch gave me only an extra 1.1MH but it's an extra 6.6MH on my 6 gpu rig. Even better though, it dropped the temperature of each card by 3-5 degrees. And power dropped by 10-12W per card saving me an extra 60+ W overall! So you get better hashrate, cooler gpus, and use much less power with this method. Subscribed and liked :)
I wonder why this process increased the wattage on my 2x rx 580. Today I bought a 3rd rx 580 and was surprised that it runs at 29 MH/s and at 80 Watt, while mine worked at 120W. So I thought I'll try overclocking. now I get 28MH/s on my 2x rx 580 bout 130 to 140 watt each. weird..
yess
you go ahead and post this video
i go ahead and watch this video
i then go ahead and look for rx 580
then i go ahead and buy rx580
then i go ahead and watch this video again
then finally i go ahead and mod my bios
perfect tutorail
well explained
and thanks for getting me 31.9mhs
it was a very good improvement from 24 to 28 and i didnt overclocked my gpu that much so its still working on 2020
not everything works that way buddy,
From 600 h/s to 1000 + h/s, you're the hero of the day!
Thanks for this video. A couple of the links weren’t right but easy enough to search for. I’m running in Linux and haven’t overclocked in simple mining but I have an increase in 5 MH/s (from 24ish to 29ish) after following your instructions. I’ll try the overclock in simple mining tomorrow.
What version of Linux are you running. And about CPU on Linux, is better?
Thank you so much!
From average 25MH/s to average 31MH/s, effective 44MH/s and pool 43MH/s on rx 580!
how's is that? what are you using?
@@streemline13 sapphire rx 580 8gb special edition with samsung memory type
Which mining program are you using?
@@streemline13 pheonix miner
Thank you. I’ll have to try that and see what I get.
Well done bro, you really made it simple and we'll try this next week on 30+ cards 570/580s
I choose Aurus rx 580 8gb but only 31 without amdtuweak if ref 30 becomes 32.5 with ccloc 1200 850 memclok 2100 860
Wow this was an adventure. You know what youre talking about i only messed up by getting freaked out by the non supported graphics through the graphics card. So once i plugged into my motherboard for display i was okay. Although my BIOS and Video/graphics drivers were reset it seems. Even though only one of my bios settings changed i had to restore the motherboard BIOS then change back to my mining settings. Thankyou for warning people about bricking also.
hI DOUBLE DOWN, thank you very much for sharing this, I increased my hash rate by at least 10%.
Thank you so much!!!
Thanks for the video.. Have a MSI RX 580 Gaming X 4 GB and it brought me from ~23 Mh/s to ~27 Mh/s and I’m not using blockchain drivers because I also do gaming.. Increased memory speed from 1750 to 1850 to see how if it’s stable. It will be nearly impossible to get over 30 Mh/s on ETH because EPOCH is 206 and mining difficulty is higher. 30+ Mh/s will be possible on crypto based on ETH blockchain. For instance, Ubiq. Ubiq is on EPOCH 19 so mining difficulty is low compared to ETH.
Fuck yes went from 8mh/s to 30-31mh/s 4x performance increase. Can’t thank you enough!!
lol you had your card on gaming mode, thats why just 8mh
@@Doskan how can change bro
gaming mode to this mode
@@shubhambalsara you need to put your gpu on compute
Perfect! Thanks a lot!
BRO YOUR THE GOAT!!! the links are expired but a quick google search will get u the updated files. WOKRING GREAT in 2021!!!
the link for Polaris Bios does not work. please help. thanks
Great video as always!
I have a private question to ask you about crypto. How would I go about asking privately?
Solid increase of 5+ MH thanks fellow miner 🙏
just getting much hotter after the bios mod :D
what do you expected?
@@MotoRobee i think he expected to it get hotter but hes just surprised that its more hot than expected
This video helps me a lot. Thanks for sharing. Take my like!
great stuff !thank you! take care
Applied this and now my dog is pregnant and Joe Biden might be President.
Well...
mining eth at 180mh/s on 2018, you are fucking rich bro
great video! what drivers are you using, the one for mining or just the regular amd drivers?
Great question, May you please share about the answer as above?
Hi, great video, just double checking, would this work on rx590 too?
Your a star mate ;)
Would my graphics card still be alright for gaming after modding the bios? Great video btw
No.. you wil have no display. That’s why you save the original BIOS
Sweet vid!
25 to 29 with rx570
thanks alot!!
Excellent video pal, just wanted to know about the power comsuption when running at 31 mh/s, is it higher than expected or an under volt tweak is required ? Thanks!
With a vbios flash it’s actually really low, only 91 watts while giving me 30 mhs
PolarisBiosEditor link not working
You can find it here : polaris-bios-editor.eu/
Works Great ... Thx
Sorry, no supported memory found. If you think this is an error, please file a bugreport @ github.com/jaschakn>> how
I have the same problem. Do you have any solution?
Same problem
can you tell me, what kind memor, that you have there? is it samsung, hynix or micron? tks
How many watts and temperature is everyone at when running this? And what is your AMD driver settings on clock speed, fan speed, core settings etc
hello my memoria vram rx580 gygabyte UNKNOWN.. HELPME
hello , how can i reset my gpu ? because i change tge timing for mining and lost my old files and i want to reset it
rx580 - samsung 32 ??? my asssssssssssssss, lets see a fallow up video where u had it runing for 24hours uptime to start but 3-5 days whould be ideal and while ur at it load HWinfo and shows us the memory errors if any
XD
Whats the problem?If you're insinuating that 32 MH is not feasible with an RX580 (w/Samsung memory).....you've either never attempted to overclock one of those cards or you dont know what you're doing when you do try to overclock it. Because 32 mh is easily attainable with most 8 GB RX580's.
I have (8 gb RX580's) -
Sapphire Nitro+ (Samsung/Hynix): 33.1 mh (Stable for 11 months)
Sapphire Nitro+ (Micron): 32.2 mh (Stable for over a year)
(2) Sapphire Nitro + SE (Micron): 31.8/32.6 (Stable for between 4 months & over a year)
(1) Sapphire Nitro+ SE (Samsung): 32.2 (Stable for 11 months)
(1) PowerColor Red Devil (Micron): 33.1 (Stable for close to a year and a half)
@@undergroundmx934 i have rx480s and rx580s from asus and 580s with mem clock so high throw a lot of memory faults. As well you should not only look at highest possible hashrate but for most efficient operation(if you pay electricity). I find my best settings to be in a range 29.5mh for 580s and 29.3 for 480s where it uses 30% less electricity than with settings like in this video. But yes it is possible easily hit 31-32mh range but is not worth it because temperatures are much higher and you stress your cards
This is bs video as his cards are overclocked and probably crash 100 times per day.
@@darko6075 my cards doesnt crash but throws a lot of mem faults. and if I supposed to choose 32mh with 100% electricity or 29.5mh with 70% of electricity with no mem faults at all I go with lower values
Mil gracias por el aporte!
aun sirve en la actualidad?
Nice... would it work for RX 590?
Hello i was patched and ready but still can't mine. I mining with nicehash so pls help thank
I’m on 8mh/s now going to try it to try and get mid 20s
Any luck?
@@kabbi3161 yes 29-30 now draw 120 watts half as effecient as 3070
is not hard to do it,im a noob with this things but i have a question, i have an rx580 sapphire oc pulse 8gb 256 /im not mining ,only gaming, if i do that thing will improve my gpu performance or what? :) and will afect my gpu in time?
atiwinflash not work for windows 10 20h2. Can you help plz?
How much power watt it will take for 31Mah?
I can’t turn up the memory in afterburner at all without it crashing wtf do i do
i went from 20mh/s with my 580 8gb to 7.5mh/s then i put the stock bios back on and every benchmark is failing and saying error on nicehash with no overclock and with it. this has completely messed up my graphics card!!
thank you soo much i got 32 mh/s on my rx 580 8gb ❤
i actually get 31,7 mhs eth without doing something oO (i have the xfx version. maybe that is the reason)
at what temperature?
After the bios mod will it work on Hive?
Thanks man I just bricked my gpu
you have a button on it for the second bios. Use the second bios to reset the card. First you need to find out what type of memory you have since if you use a bios for samsung memory when you have micron you will fuck it up. Pretty sure that's why you bricked it.
Good thing we live in a time period where people dont have to take responsibility for their own actions. You attempted to do something that you know nothing about and ended up ruining your gpu...........who's fault is it???
Obviously its @DOUBLEDOWN 's fault. Yup, you're not responsible for your own actions. If something goes wrong.......blame someone else!
SMH
did u at lest fix it?
Thx a lot
THANK YOUUUU!!!!
Still can't get more than 6.99MH/s out of my RX580 8GB.... Any help?
I got one flashed and now no signal from booting just black but it’s running fine… just took a bit to go past the debug lights.. tried restarting it again
I did this and it failed
Now its crashed
A solution please !!!!!!!!!!!!!
also which rx580 driver did you use ? blockchain ?
lol did this with a RX 480 4gb and the fucker briiiiiccccked. Good thing I was able to load in the previous bios.
Hey bro i tried this with my 480 and my screen just froze it's been like 30 mins do you have any suggestions on what to do ? Should I restart my pc ?
@@alimomo2251 how did you solve, my pc froze also. Don't know if restart or wait...
Hey it didnt work for me. After reboot it doesnt find any driver.
Can you please verify the GPU Memory Errors with HWInfo ? i don't think Samsung Mems could get 32mh !
Very stabile?????? Wtf!! 32mh s ,30 minute letter 25mh s !!?
Hi ! Does it work with a SAPPIHRE NITRO + RX 570 8GB ?
Polaris bios editer says memory not found!
before my hashrate was 30mhs. after it dropped to 28 and cant get rig to run stable any idea why
Why so crazy core clock you use? It's normal 1150 max for ETH. High core clock with no downvolt, as I see in your video
24Mhs stock???? My XFX 580 hashes at around 12 Mhs stock.
dude go to radeon settings and change graphics to compute it will get 24 mhs
There could be a couple things causing the super low stock hash but your hash rate makes me think you're using the wrong driver.
@@NOMOREDOTA2 Thank you!
Hello brother, Please help me, I follow everything in this tutorial after I restart the pc. It crashed, When I reinstall the windows and put the gpu on it also crashed. Please help me.
Thanks for this tutorial, it's still 100% valid and accurate in 2021!! Brought my RX 580 8GB from 24.8 MHs to 29..4 MHs
I have a gaming x rx580 4gb and it’s only doing 2.04 MHs...The Polaris flash also doesn’t have the one time clicker. It looks completely different from what is shown here :(
@@xtr3mezer0 my 4gb 580 is only at 7.32 MH/s :(
@@Junkfiles446 apparently 4gb gpus are obsolete for mining and you’re better off just going to work u less you have 8gb gpus 😂
@@xtr3mezer0 yes bro figure it out just like an hour ago. And i see those calculators from nicehash
are you also using the same msi after burner settings?
Does this work on all RX580? not just Polaris?
Great video! Thank you! I try it, but my computer freezes for about an hour now. Shall I reset or will I damage the GPU?
Hi can u please check link for polaris bios am geting 404 thx
You helped a Brazilian a lot, thanks!
how do you execute or run Driver Patch ATIkmdag its in a .sys format? but on yours it is coming up as an application?
@@Antonio-vr5ro there is actually a better way if you look for the different mining straps you can modify it that way without having to patch the graphics card
also not getting above 27.5 bios modded. memory over clocked, and under volted. HELP
do you have a monitor attached to the gpu?
Can I run this card on hivos after doing this on computer ! Bios .
Dude your miner says you're running 6 1060s not RX cards...
go to 7:47 you'll see GPU #0 Ellesemere (Radeon Rx 580 Series), then Gpu 1 to 6 Nvidia GTX 1060
Does this work for other coins too?
im trying this over because my GPU randomly hash 16 each now, but when I go to mod them again it says "This GPU is already modded" when I press program on ATIFLASH. What Can i do?
Have to upgrade polaris bios editor after 6 months when the free trial version ends.. I had to switch back to OEM bios while BTC climbs a bit more...
1 of my 11 RX 580 gives 75 Mh/s but that's not stable and goes back to 30 Mh/s. Is there anyway to make it stable and use the bios on other cards ?
Can't get ram speed above 2150 without constant crashes on xfx 580 Stuck with 30
Is there same mod like this for nvidia?
hi... the "polaris bios" link not available. where can i download it at another place ?
dose this help with gaming ?
Will this work for rx590?
will this make the temperature higher as it gains more MH?
I have 31MH/s just by flipping the bios switch located on the RX580 card next to the power input on top of the card. I broke the seal on my cards so I believe they are new and I've never modded the bios. Should I mod it and get more or should I just leave it alone? The switch boosted me from 26 to 30 then I set clocks at cc1150/850 and mem2060/1060 I'm getting 31.12 MH/s and about 88 Watts and it stays less than 50° with a huge fan on top. I really am curious if this card can go faster or should I just leave it alone?
Is 32 MH/s the max for the RX580 ? I don't want to mess with the bios for 1 MH or less. DO PEOPLE KNOW ABOUT THE PERFORMANCE SWITCH ON THE CARD? The switch is located in the top of the card, very tiny switch, next to the power input on the top of the card. No bios mod needed.
@@djjohnny8149 bro whatt i just found it on my rx 590 0.0
sapphire nitro brand?
I have 4x RX 580 8GB. Do I only have to have one GPU installed when flashing?
yes
@mIx CoNtEnTs Right now with the low ETH price: I have to pay 65 CHF for electricity costs. And then i do 140 CHF minus electricity costs.
Can it work on Radeon RX 570 Founder Edition?
Please helo me, I am getting ONLY 0.2 MH/S ON MY RX 570 4 GIG
Bro I need help shows me that the dag has been damaged
So i already got a rig running 5 cards: 3x RX580 strix 1x RX480 8gb strix and 1x 480 8gb Sapphire Nitro and they all do around 27mhs without bios mod..If i want to mod bios i need to turn everything off and do bios mod on one by one and then reassembly whole rig all over or?
Can i mod while they are on risers or it needs to be in pcie 16?
I would just plug them all off and go 1 by 1?
did you do the bios mod ? what changes happen
It works but I can't find the patch
On my rx 580 nitro plus sapphire i actually have a pshyical switch to turn on mining/performance/overclock mode however you want to call it and i get 30 mh/s
What direction is the switch towards? the video outputs or the other end?
Do i need to tamper with voltage after doing this? I only get 25 mh
25 mh is good
Polaris Bios link is missing
Can i go back to defaults after i am done mining?
Hey man, does this affect gaming at all? I ask this because i use my rx 580 for gaming and mining as well, so if it affects games i wont do it
I have the same question, if u test it, please tell me, ty bro!
@@fabriipariss Hey man, it does affect gaming, but to change it back its really easy.
@@enzopresbiteris What are the fps gains, if they are not that big I might not wanna try it.
@@krish6140 Its pretty significative, because you will actually have to change your graphics card processing type from graphics processing to cumputation, and that will plummet your fps gains to maybe half in every game
It messed my GPU my pc can’t recognize it for some reason someone please help
How do you change file atikmdag.sys to atikmdag.exe, because on your clip is an application, and mine is .sys. I need help
Is this a Windows 10 application because all I see is on lynux