soft mod got 470 and 480 at 30mh and gpu is down clocked to 750mhz power watt draw is amazing per hash
6 ปีที่แล้ว +10
BRICKED CARDS SOLUTION: I bricked my MSI rx580 gaming x 3 days after I purchased it LOL but I discovered a easy way to fix it. My msi doesn´t have a bios restore switch so... This is how you can fix them... You must have a working bios ( I hope you made a back up of the original) then the trick is as follws: Turn off the PC and remove your GPU (rx580 rx 480 etc.) 1.-Enter to the motherboard bios 2.- Find the INTEGRATED GRAPHICS CONFIGURATION 3.-Change PEG for IGD (This will disable the pci-e bus so windows will boot with Motherboard integrated GPU) Save and Exit 4.- Turn off the PC and conect your monitor to the Motherboar and reinstall your beloved bricked GPU 5.-Turn on your PC and windows will boot normally. 6.- Install your Rx580/480 bios with AtiwinFlash in CMD 8.- Reboot your Pc and restore the motherboard bios config to PEG so you can boot with the GPU. 9.- Conect your monitor to the GPU and turn it on. 7.-Donate a litle if you have a good heart 35y2SQKfeGBa5eVacZFYveRRstsSC5U8WB 8.- Enjoy your fully functional graphic card!!! 9.- Give a tumbs Up to this comment so others can see it. 10.- Cheers from México! This worked for me and I´m sure it will work for you if you follow this steps!!!
Or move the card to PCIE slot 2 put any other working GPU in slot 1, If you don't have one just buy any old £3-5 card like a GF850 or GT250 etc from eBay, boot using the replacement card, and then reflash the bricked card with AtiwinFlash or some other flashing program.
Bro, this is THE ONLY way that worked for my Rx 480 Strix, all other tutorials telling me to use "One click timings patch" ended up glitching everything and the card couldn't work stable even with atikmdag-patcher. This was so simply explained, thank you, good job!
I've seen other videos where atiwinflash will actually warn you that the 256kb bios from gpuz can brick your card and there is another TH-camr I've seen it actually happen too and he switched to atiwinflash then
Luke Amos thats true. Tho that warning always comes afaik. But gpuz sometimes failes to copy some empty space in the bios which bricks the card. Its just a small chance but still there
Can someone help me? my gigabyte rx 580 dont let me flash the bios, it messages erros when i try to do that in the atiflash. This gpu is totally shit, btw, it mines at 22 mh in stock and the oc doesnt affect positivle the card. If nobody helps me the only way i see is to return this gpu
May I say how handy this video has been for me? I had about 70 Rx470s which I learned how to bios mod about a year ago. But recently, I've got my hands on a large number of RX570s and Rx 580s 4&8GB. And this video made my life so much easier since I'm dealing with many different MBs and risers and PSUs and majority of them are second handed and have problems of their own. So having this part of the work done like a piece of pie, specially when you just nutshell it in the beginning for ppl like me who know what they're doing, made my life so much easier! So.... Thanks!
Thank man, this is exactly what I searched for. Everyone just testing top tier Graphic Cards with 8GB. But just few talking about 4GB versions of Rx580's series. Now I'm running 29,5 with only 100W on GPU. Sapphire RX580 Pulse 4GB here
For RX570/580 series cards copy the following straps: 4GB versions: Copy 1:1500 to 1:1625, 1:1750, 1:2000 and the 2:1500 to 2:1625, 2:1750, 2:2000 you didn't do that in the video you just did 2:1500 to 2:1625, 2:1750, 2:2000 what about 1:1500 to 1:1625, 1:1750, 1:2000
Thank you for this. I was so nervous about this mod but your vid made me go back inside and do this mod. I am getting 3MH/s more. Great vids. Keep up the amazing work. You remind me of someone I used to watch vids on WoW lore. Thanks again. 3MH/s per card is huge for me.
Hey everybody, if you are trying to mine and getting a "no card detected" error, or you cant open up Relive, its because you need to go into the atikmdag-patcher file and have the drivers re signed. Hope this could help somebody out. Was pretty scary for me.
I can confirm that 1:1500 to 1:1625, 1:1750, 1:2000 and the 2:1500 to 2:1625, 2:1750, 2:2000 works on two identical PowerColor RX570 4GB Red Dragons. Core: 1150; Mem: 2100 (No voltage tweaking for now). Important: This only works on Solo mining. Results: Claymore 9.5 ETH: 28.8MH/s
Good evening, I used you video to mod my rx 470 bios (4g from Elpida) and I went through all the steps without any problem. But, there is always a but, after ATI winflash asked me to restart my gpu was no longer recognised by any software, not even radeon utility. I tried DDU but it changed nothing. I was able to flash my card back to it's original bios and everything worked again. Have you got an idea why ?
Rodrigo Lobo, amigao, entao apos fazer biosmod da minha xfx rx470 4gb o windows reiniciar mas fica com exclamacao na placa no gerenciados de dispositivos do windows, e nao minera, só instalar essa versao q vai? Depois do biosmod vc notou ganho? Além do biosmod fez um overclock? Se sim, com quais valores??
Fala xará, a princípio é pra funcionar com esse driver aí sim, mas esse problema que vc está tendo não aconteceu comigo, então desculpe não poder ajudar muito detalhadamente! Mas tenta o driver que talvez funcione. Com relação ao biosmod, fiz sim, percebi um ganho de ~3mh/s com bios mod e uns 4mh/s com o overclock. O OC pra mim foi melhor. Pra bios mod, lá no Polaris Bios Editos eu copiei os "straps" do 1650 pra frente, até o 2000. o OC eu fiz: GPU clock: 1150 e Memory clock: 2070. Bem estabilizado a 29.5 mh/s deixei assim. Único detalhe é que a minha é uma Sapphire Nitro+, não é a xfx, mas acredito que isso não muda :)
Rodrigo Lobo mas 4gb não tem q copiar o campo do 1500 pros outros? Vc copiou 1625 pros outros? Eu uso 2 tipos de placas e daí uso o último driver da AMD, dai qndo faço biosmod a 470 4gb é como se ela perdesse o drive e não vai de jeito nenhum
That's the highest rate, after optimizing for power consumption and all is said and done, it's running at 27MH now. I'm quite happy with that rate for such a small card. it runs cooler than my msi 570 OC edition card..and i get a better hashrate with it. the ITX is sitting at 54 deg C, while my MSI armor is over 60 C and at 24-25 MH.
Thank you so much. This was super easy to follow and i was able to get 3.4 more hash 28.8 total out of my Sapphire RX 580 4GB Elpida ram. 1200/2000 OC and just a strap change.
This is very basic bios mod and it won't work on every card, for the newest RX 5xx cards Polaris Bios Editor doesn't have to work right. Bios mod can be done much better with performance timings, undervolting VDDC, etc. My tutorial shows it very quickly.
would this be good for gaming as well? what doe sthe bios o? just upgrade your memory essentially? If it makes cards go from 8 or 9 mega hash to 28 or 30 mega hash would you not see an increase in gaming as well?
Those are different memory brands. 0 is usually only 1 memory brand 1 and 2 are bioses with 2 memory brands inside. You can see in GPU-Z what memory you have. You can write me for mod or performance memory timings monerobiosedit@gmail.com
i modded one of them and it got a 20% better, but when overclocked the two of them got the same rate. And i couldnt undercloock the core of the modded one, due to this the overclocked one gets hotter unncecesary. If you speack spanish i may explain myself better. Lol
Guys, just telling you my experience with my Sapphire nitro RX480 4gb OC+: DO NOT SAVE YOUR BIOS USING GPU-Z. Save it using ATI winflash. I used GPU-z to save BIOS, copied 1500 timings to all above and the BIOS bricked, but when i used ATI winflash, using the same timings, it worked! Now im getting 27MH/s instead of my previous 22! Just my experience, other than that it´s a good tutorial!
Use MSI Afterburner software... I'm running my 1070's Core clock +150MHz and Memory clock +563MHz (Maximum stable non-Samsung memory speed 4,363MHz), Power Limit @ 65% and custom fan settings to keep them at or below 60`C. 30.2-30.8Mh/s mining ETH 1060's Core clock +60MHz, Memory clock +500MHz(non-Samsung memory speed of 4,303MHz), Power Limit @ 60% and (again) custom fan settings to keep them at or below 62`C. 22.1-22.8Mh/s mining ETH nVidia is much more efficient from my experience. Have a rig running 2x 1070's and 1 1060 6GB with a Ryzen 7 1700 Processor using just a 600Watt PSU! :)
use ETH enlargment pill if you're using 1070s or 1080s. It's essentially a bios mod hack for DDR6 cards and similar to what nvidia did with their p100 mining card
lol, this works. I thought this tutorial might be obsolete. But this works, though it need a slight update because polaris software has been updated with new UI. Took some time, but figured it out :)
Hi, great video bro. I have a question, i'm about to biosmod a RX470 based Rig with Elpida and Hynix memories, when i'm editing the times with Polaris 1.5 i get a 1.1500 strip and a 2.1500, this last one is the one you edit on the video (2cond example you use), so my questios is if you also copy the 1-1.500 strip to all above, or if i should only copy the 2-2.500 strip to all 2-XXXabove and leave the 1XXX as default
Hello, your video is excellent, I have a question, for the MSI X Gaming RX580 cards of 8GB, the values of 1750 to 2000 are copied in registers 1 and 2 ?, and what should I do with 2250 timming, is it left the same? thanks for your help.
A WARNING TO EVERYONE who may still attempt this. I followed the tutorial step by step, when i flashed the bios and rebooted, the pc didn't boot up. At first i tried to fix it by using the original on usb on startup, however it didn't work and i came to realize my card is completely bricked. I knew the risks, and i might be able to get warranty but still it caused me stress and i wouldn't recommend it.
which graphics card drivers shall I use after modifying ? I've 3x Asus strix 480 8gb, 2x MSI GAMING X 470 8gb and one sapphire 480 NITRO+ 4GB. do i need to use windows driver patch as well ? (I will be windows for mining) If yes, please reply with steps needed. Thanks, you add so much knowledge to people
Thanks for the video! The only thing is that I didn't have 1:xxxx or 2:xxxx only 0:xxx on my Asus ROG STRIX-RX580-O8G-GAMING Radeon RX 580 8 Gt. However I changed value of 1750 to 2000 and flashed that rom. Default hash rate was about 24, after flashing new bios - about 27.
I already own a MSI RX580 8GB card that has been modified to its Bios settings for the sake of mining and currently I would like to return the Bios to the default settings from the manufacturer. Thanks
i have a xfx rx480 8G RS the timings mods ended up braking my bios. i was able to recover bios because i backed up and was able to rest using the duel bios (booting from the working bios switch to the bricked one wile it was still on and flashed to the normal bios for that slot and restart) i did run into another problem was after the reboot it was hanging on the MB Bios screen not doing nothing. i forced shutdown 3 times to trigger a clear cmos. what was making the hang was the uefi mode so i had to do a clear cmos to re-enable legacy mode. it seems like after flashing the gpu corrupted the security key for secure boot. here is a tip before staring the flash make sure your uefi mode is set to legacy. revert back if it was when your are done
any1 else having problems flashing rx470 with samsung memeory?,I just got 2 cards, I went thru all the steps and flashed one card and when I restart, system doesnt even recognize moded ccard
Excellent video, I currently have a RIG of 6 Saphire Pulse Radeon RX580 4GB cards, I see that these cards do not have the button Bios mode, I did a manual modification of the values of the clock and obtained very little rise in speed, currently already mining with the latest AMD drivers for blockchain, i get 25.171 Mh / s on each card, please can you tell me if there is a FLASH ready to modify this card and reach 28 or 29 Mh / s, or if on this type of cards 4GB is the maximum you can get. Many thanks and greetings from Ecuador.
Hello,I got a question I have my gpus rx 580 (gigabyte,xfx,msi)Do I need to do this for every single card or all gpus in one time?Are msi rx580 good for this guide?Thanks alot
dumb question : After Moding our gpu, do we still need to OC the card with afterburner? Also, you didn't show how to limit the power consumption, although I saw a box on Polaris where you can change the value, but I'm to afraid to do something wrong.
Amazing video dude! Thanks a lot for this, I just have one question.. For everyone, if I have two identical cards... Both are RX 570 4GB ASUS ELPIDA... Do I have to save both bios original and modded for both cards? Or can I just use the same original and modded for both cards?
What do you mean about patching your card? I think I have that problem. Mine was used for minning but I could flash stock bios but AMD driver refuses to install.
@@jotamascarell there is a system file you can download that patches a graphics card after bios modding, it helps with it after its done. I forget what its called to get it but i would just search up graphics card patching or something like that
hello brother thanks for those videos they're very helpful, my question is if i want to play any game after i bios mode my gpu, can i do it without a problem or should i go back to the original bios to play games? thanks
Hi. I did everything as you stated in the video, but I'm having an issue. After modding bios and using ATIFlash and restarting gpu-z shows 0mhz. Claymore wasn't locating the card and so I reflashed the original bios back. Now I am able to mine with it, but gpu-z/afterburner are still showing as 0mhz. I'm positive I changed the right straps. I went over it many times just to be sure. If there is anything I'm missing please let me know. Thank you! Sapphire Pulse RX570 4gb Hynix Windows 10 64bit Latest Crimson Drivers ATIFLASH 2.74 PolarisBiosEditor for RX5XX cards from your Mega. Edit: FIgured it out. I forgot to patch with the atikmdag after bios mod/before restart. Works fine now 24mh to 27.35mh....pushing for 28mh
Thanks for the video. I have asus rx 580 8 gb oc edition, It is giving only 16Mh/s. So did programming. Display got freeze. How much time it gonna take to complete these process?
Hello, thanks for all the great vids! Question: Can I set up a 6 GPU ETC miner with different cards - all Radeon, but 3 MSI RX480s and 3 Sapphire RX470's? If so, Thank you!
In the beginning you said for 8gb cards you only copy the 1750 strap to the 2000 strap, but then later on in the video for the 8gb card you copied the 1500 strap to all above, which is it?
Hey, I got the RX 470 8gb Mining GPU's with no video out. They did stock mh at 15 and tweaked the best I could get them up to is 20, with bios mod and eth oc. Should I return them? I've tested them in two PC's with win 10 & 7 + linux. Blockchain drivers, etc... Thoughts? (two cards, both same results)
To restore if bricked simply have another gpu in at the same time and boot from that one. Then reflash original bios onto card noting what device number it is first.
you are king men, thanks so much... you made my life easier if you have time do a video from start to finish how to program eterium rig (bios. overclock and everuthing) you are king you ehplans very good
Great work Thank you for your time ... i use a rx560 4g increased frames rates thanks.. my other question were else can i look for more or different bios mods ... great work
have a ques buddy ... is flashing a modded bios to all other same model gpu will have some ill effect or not ... like a modded bios of 1- rx580 to all other rx580 with same memory will have any bad effect ?
Hi, Thanks for the Video, seems like it doesnt work for rx480 Nitro micron. Any tip which card is the best buy to upgrade? Planning to buy 4 new cards if they will available somedoy :D
So lets say you get one of the saphire nitro+ cards that has a 4GB sticker on top of the actual 8GB original printing of the package. I have modded these cards to 8GB by changing the value of the Size(MB) field in the VRAM box of Polaris BOIS editor. does the 1500mhz memory strap still get copied to all the following fields, or do we change the card to 8GB as stated above, and use the 1750 strap?
Hi, great video! I did the BIOS mod for my RX580. Had it running and started messing with the memory OC. My screen went black with no signal to the monitor. Fans still run on my GPU. Tried to reseat the GPU, different cables, etc. with no luck. Put it a different GPU and it works so the PCI slot is fine. Did I fry my GPU??? Is there anything to do about it?
Doesn't worked for me :( Sapphire RX 580 Pulse 4gb Hynix. (113-4E353CU-O4B) Changed the straps at bank 1 and bank 2, the 1500 to 1625, 1750 and 2000 Run in Ethos, set globalcore 1200 and globalmen 2050 (without "#"), nothing change... Run in Ethos + Claymore; set -cclock 1200, -mclock 2050, -cvddc 850 and -mvddc 850... nothing happens... Only see a ver very little change: One flasehd card works at 24.05 in ETH and 725 in DCR, the other 5 cards, so and so, 23.75 and 715. What I am doing bad??? The BIOS is changed sure because ATIflash said it if I try re-flash it, and I can flash the stock BIOS and re-flash the changed again. Open it in Polaris editor and see how the straps are the same from 1:1500 to 1:2000 and from 2:1500 to 2:2000. Thx in advance for the help ;)
followed exactly for one of my 4gb 470's, hit program, computer crashed. came back with no network and windows reported card "had a problem" and was disabled. Was able to write the original ROM to it and it recovered. Wanted this to work but no joy, slightly fearful to try again for completely hosing the card...
I have a Power Color Rx 470 4gb Red Dragon with Samsung memory.. but.. it's a little different on Timing Value from the video.. it is looking more like my Sapphire RX 470 8gb Nitro+... Timing Values starts are: 0.1500 555, 0.1625 555, 0.1750 777, 0.1900 777 and 0.2000 777. My 4gb board looks more like the 8gb version on this aspect.. Should I copy the 1500 over all other values?
Changes made on the amd bios mod settings, does it save save the settings into the graphics card or on the computer hard drive? Not sure if the graphics card has any kind of memory chip to save any settings applied to it. Just curious cos I'm trying to move from windows OS to Simple mining OS, trying to see if the edited Bios mode will work on SMOS as well. Thanks!
People are talking about flashing. Why is that? My 8x sapphire radeon 570 8gb arrived today. I will to the time strap. But what about OC and undervolt? Should I enable silent bios first?
Either I got some dud cards, or the difficulty has gone up. 2 brand new asus rx580 4gb OC (elphida memory) cards each only do 17.5MHs out of the box with claymore miner. I flashed them exactly like this video said and got up to 21.5MHs. I tried multiple miners and the numbers don't vary much from that.
According to what's seen in the video and because it's hard to find video cards, do you think this gpu model MSI Radeon RX 570 ARMOR 4G OC can be modding and can make 28 mh / s?
Hi, I have 6 sapphire pulse rx 570 cards with 4GB Samsung DDR5 Memory and I was tried to mod these cards as you shown in your video but after restart my rig , cards not working. Miner detecting card but not starting mining. Please give me your valuable guideline. Thanx
worked for me :) tho the temperature went up sky high on my rx480 8gb so just whattman with the fan got any advice on temps as that card is sitting around 81c at 27m/h
Superb video, really professional! However I cannot load the bios on my Spphire Pulse 580 8GB, I have an error message from ATIflash (can not access the BIOS). I do not have a switch like on the Sapphire Nitro + (or did I look bad?) Any ideas ?
I was also stuck at 27 Mh/s on my Sapphire Nitro+ RX 580 8GB 256kb rom. Here is the new one for 29.5-30 Mh/s Running on afterburner -66 Core -30% power 1150-1200 Core clock, 2240 Memory clock. Runs stable no problems drive.google.com/open?id=0B65rDCpvnF9xSW4zYW1EYnVaS0E
Hi BuriedONE Blockchain, thanks for your videos, they always help me. I have a problem, I have some video cards RX 580 MSI ARMOR 4GB Hynix and the timings are differents, namely not 1:1500, 1:1625, 1:1750, 1:2000 or 2:1500, 2:1625, 2:1750, 2:2000 but 2118409, 21645256, 3355496, 3357483,...etc. Which straps timing Should I change? I hope you can help me with this too.
You sir are an absolute genius! I was mining each graphics card at 9.000, and now I'm mining them at 20.000
soft mod got 470 and 480 at 30mh and gpu is down clocked to 750mhz power watt draw is amazing per hash
BRICKED CARDS SOLUTION: I bricked my MSI rx580 gaming x 3 days after I purchased it LOL but I discovered a easy way to fix it. My msi doesn´t have a bios restore switch so... This is how you can fix them... You must have a working bios ( I hope you made a back up of the original) then the trick is as follws:
Turn off the PC and remove your GPU (rx580 rx 480 etc.)
1.-Enter to the motherboard bios
2.- Find the INTEGRATED GRAPHICS CONFIGURATION
3.-Change PEG for IGD (This will disable the pci-e bus so windows will boot with Motherboard integrated GPU) Save and Exit
4.- Turn off the PC and conect your monitor to the Motherboar and reinstall your beloved bricked GPU
5.-Turn on your PC and windows will boot normally.
6.- Install your Rx580/480 bios with AtiwinFlash in CMD
8.- Reboot your Pc and restore the motherboard bios config to PEG so you can boot with the GPU.
9.- Conect your monitor to the GPU and turn it on.
7.-Donate a litle if you have a good heart 35y2SQKfeGBa5eVacZFYveRRstsSC5U8WB
8.- Enjoy your fully functional graphic card!!!
9.- Give a tumbs Up to this comment so others can see it.
10.- Cheers from México!
This worked for me and I´m sure it will work for you if you follow this steps!!!
Good tutorial, but this won’t work with people that have a processor that doesn’t have an IGPU.
Or move the card to PCIE slot 2 put any other working GPU in slot 1, If you don't have one just buy any old £3-5 card like a GF850 or GT250 etc from eBay, boot using the replacement card, and then reflash the bricked card with AtiwinFlash or some other flashing program.
Solution for RX580 Nitro+ OC 4GB HYNIX:
1:1500 to 1:2000 and 2:1500 to 2:2000, core 1150 mem 2050.
Regards.
is your card still alive?
Bro, this is THE ONLY way that worked for my Rx 480 Strix, all other tutorials telling me to use "One click timings patch" ended up glitching everything and the card couldn't work stable even with atikmdag-patcher. This was so simply explained, thank you, good job!
Thanks but you should not use gpuz to save bios, it can brick your card, always use atiwinflash
Luke Amos never had a problem with it but thx for noticing!
I've seen other videos where atiwinflash will actually warn you that the 256kb bios from gpuz can brick your card and there is another TH-camr I've seen it actually happen too and he switched to atiwinflash then
Luke Amos thats true. Tho that warning always comes afaik. But gpuz sometimes failes to copy some empty space in the bios which bricks the card. Its just a small chance but still there
Yep, did that to my old RX 470 :(
Can someone help me? my gigabyte rx 580 dont let me flash the bios, it messages erros when i try to do that in the atiflash. This gpu is totally shit, btw, it mines at 22 mh in stock and the oc doesnt affect positivle the card. If nobody helps me the only way i see is to return this gpu
May I say how handy this video has been for me?
I had about 70 Rx470s which I learned how to bios mod about a year ago.
But recently, I've got my hands on a large number of RX570s and Rx 580s 4&8GB. And this video made my life so much easier since I'm dealing with many different MBs and risers and PSUs and majority of them are second handed and have problems of their own.
So having this part of the work done like a piece of pie, specially when you just nutshell it in the beginning for ppl like me who know what they're doing, made my life so much easier! So.... Thanks!
Can you make a 2019 video like this? As of now is something is different :D
@Jeremy Greyson nobody cares
@Jeremy Greyson pathetic
What obout 2021 ?
Thank man, this is exactly what I searched for. Everyone just testing top tier Graphic Cards with 8GB. But just few talking about 4GB versions of Rx580's series. Now I'm running 29,5 with only 100W on GPU. Sapphire RX580 Pulse 4GB here
For RX570/580 series cards copy the following straps:
4GB versions:
Copy 1:1500 to 1:1625, 1:1750, 1:2000 and the 2:1500 to 2:1625, 2:1750, 2:2000
you didn't do that in the video
you just did
2:1500 to 2:1625, 2:1750, 2:2000
what about
1:1500 to 1:1625, 1:1750, 1:2000
Thank you for this. I was so nervous about this mod but your vid made me go back inside and do this mod. I am getting 3MH/s more.
Great vids. Keep up the amazing work.
You remind me of someone I used to watch vids on WoW lore.
Thanks again. 3MH/s per card is huge for me.
Hey everybody, if you are trying to mine and getting a "no card detected" error, or you cant open up Relive, its because you need to go into the atikmdag-patcher file and have the drivers re signed. Hope this could help somebody out. Was pretty scary for me.
after flashing the bios i get error Windows has stopped this device because it has reported problems. (Code 43)
Elnur Taghiyev do the patch - I wasted two days on this as well. Terrified to try flash again now....
Finallly someone did this video my card has been running stock for weeks
first tell me how to buy a card , cards in europe are sold out
Keep searching for local stores alround you, i found one today!
hope i will get one soon , what you think how long will we be able to mine eth and etc for this amount of money ?
my screen keeps flashing when i try to extract atiwinflash
why?
If you order 10 cards I can ship you sapphire Rx 570 8GB at 280$ per card .. I'll setup cards at eBay if you want guarantee
ALAN SANTHOSH hi Alan i am interested in buying cards, can u share your whatsapp no. for further discussion
I can confirm that 1:1500 to 1:1625, 1:1750, 1:2000 and the 2:1500 to 2:1625, 2:1750, 2:2000 works on two identical PowerColor RX570 4GB Red Dragons. Core: 1150; Mem: 2100 (No voltage tweaking for now). Important: This only works on Solo mining. Results: Claymore 9.5 ETH: 28.8MH/s
I have 4 identical sapphire pulse 4gb. Would I need to apply 1:500 to all and 2:500 to all. Or is copying 1:500 enough
What do you mean by Solo Mining? will this work with Simple Mining OS?
after following your exact instructions i get "error code 43".
what can i do ?
Thanks so much for this video! Very well done and informative! Ive gained 8 GPU's in hashrate
Good evening, I used you video to mod my rx 470 bios (4g from Elpida) and I went through all the steps without any problem. But, there is always a but, after ATI winflash asked me to restart my gpu was no longer recognised by any software, not even radeon utility. I tried DDU but it changed nothing. I was able to flash my card back to it's original bios and everything worked again.
Have you got an idea why ?
I had exactly this problem. Solved using AMD Driver 16.9. Install it even after reboot, if needed. Tell me if worked later :)
Same here, @ZETRON
Rodrigo Lobo, amigao, entao apos fazer biosmod da minha xfx rx470 4gb o windows reiniciar mas fica com exclamacao na placa no gerenciados de dispositivos do windows, e nao minera, só instalar essa versao q vai? Depois do biosmod vc notou ganho? Além do biosmod fez um overclock? Se sim, com quais valores??
Fala xará, a princípio é pra funcionar com esse driver aí sim, mas esse problema que vc está tendo não aconteceu comigo, então desculpe não poder ajudar muito detalhadamente! Mas tenta o driver que talvez funcione. Com relação ao biosmod, fiz sim, percebi um ganho de ~3mh/s com bios mod e uns 4mh/s com o overclock. O OC pra mim foi melhor. Pra bios mod, lá no Polaris Bios Editos eu copiei os "straps" do 1650 pra frente, até o 2000. o OC eu fiz: GPU clock: 1150 e Memory clock: 2070. Bem estabilizado a 29.5 mh/s deixei assim. Único detalhe é que a minha é uma Sapphire Nitro+, não é a xfx, mas acredito que isso não muda :)
Rodrigo Lobo mas 4gb não tem q copiar o campo do 1500 pros outros? Vc copiou 1625 pros outros? Eu uso 2 tipos de placas e daí uso o último driver da AMD, dai qndo faço biosmod a 470 4gb é como se ela perdesse o drive e não vai de jeito nenhum
Thx for the video, went from 21 hashrate to 30 on a rx570 sapphire pulse ITX card! You rock!
That's the highest rate, after optimizing for power consumption and all is said and done, it's running at 27MH now. I'm quite happy with that rate for such a small card. it runs cooler than my msi 570 OC edition card..and i get a better hashrate with it. the ITX is sitting at 54 deg C, while my MSI armor is over 60 C and at 24-25 MH.
can u help me with my Sapphire Pulse RX 580 8GB Hynix pls!! i heard we can push them almost 31? can u help me pls!!!
have tried ?
Thank you so much. This was super easy to follow and i was able to get 3.4 more hash 28.8 total out of my Sapphire RX 580 4GB Elpida ram. 1200/2000 OC and just a strap change.
There you go!
Hynix memory 8gb copy 1750 to 2250
right?
Any answer on this?
i was looking for the same answer.
Anyone know the answer to this?
8GB versions:
Copy 1:1750 to 1:2000 and 2:1750 to 2:2000
Александр Эрик you wrote the samething twice? You meane to 2250 correct?
Absolute genius.. 4 years later. You sir are the king !
Could you download the files
I. Couldnot
@@hasandabbas2679 hive or windows?
@@endgamen1nja595 mobile😁
@@endgamen1nja595 بتحكي عربي مو هيك🤲😔
@@endgamen1nja595 راح عندي البيوس الاساسي للكرت و ما عبحسن جيب واحد
اسم الكرت rx_480p45ddj
نوع الذواكر البيديا
This is very basic bios mod and it won't work on every card, for the newest RX 5xx cards Polaris Bios Editor doesn't have to work right.
Bios mod can be done much better with performance timings, undervolting VDDC, etc. My tutorial shows it very quickly.
i agree..
nice try monero miner
What?
@mike zx does it work on your 470/480?
and yeah you fucking charge us? go to hell
would this be good for gaming as well? what doe sthe bios o? just upgrade your memory essentially? If it makes cards go from 8 or 9 mega hash to 28 or 30 mega hash would you not see an increase in gaming as well?
What's the different between 0:XXXX, 1:XXXX and 2:XXXX straps?
Those are different memory brands.
0 is usually only 1 memory brand
1 and 2 are bioses with 2 memory brands inside. You can see in GPU-Z what memory you have.
You can write me for mod or performance memory timings monerobiosedit@gmail.com
i have a 5xx and I have 1 and 2, should i copy 1500 of 1 in 1:1625, 1750,1875 and 2000.....and 1500 of 2 in 2:1750, 2000, 2250.....?
Gabriel Cirvini I have the same issue, I modded the 2: straps but I didn't get any changes in MH. Did you find what to do?
i will try this trick. i have 580 pulse 8gb and hynix memory. you think it work good? at this time i can't go over 25mh/s on eth
i modded one of them and it got a 20% better, but when overclocked the two of them got the same rate. And i couldnt undercloock the core of the modded one, due to this the overclocked one gets hotter unncecesary. If you speack spanish i may explain myself better. Lol
Guys, just telling you my experience with my Sapphire nitro RX480 4gb OC+: DO NOT SAVE YOUR BIOS USING GPU-Z. Save it using ATI winflash.
I used GPU-z to save BIOS, copied 1500 timings to all above and the BIOS bricked, but when i used ATI winflash, using the same timings, it worked! Now im getting 27MH/s instead of my previous 22!
Just my experience, other than that it´s a good tutorial!
how about Nvidia cards?
You can't mod Nvidia, just mine with out of the box settings.
Rafael Reyes you can overclock them
you can overclock but you can't mod bios. dont spread bullshit Miguel Carones
Use MSI Afterburner software... I'm running my 1070's Core clock +150MHz and Memory clock +563MHz (Maximum stable non-Samsung memory speed 4,363MHz), Power Limit @ 65% and custom fan settings to keep them at or below 60`C. 30.2-30.8Mh/s mining ETH
1060's Core clock +60MHz, Memory clock +500MHz(non-Samsung memory speed of 4,303MHz), Power Limit @ 60% and (again) custom fan settings to keep them at or below 62`C. 22.1-22.8Mh/s mining ETH
nVidia is much more efficient from my experience. Have a rig running 2x 1070's and 1 1060 6GB with a Ryzen 7 1700 Processor using just a 600Watt PSU! :)
use ETH enlargment pill if you're using 1070s or 1080s. It's essentially a bios mod hack for DDR6 cards and similar to what nvidia did with their p100 mining card
That's been the best walkthru I've seen yet on Polaris bio modding. Thanks.
I disagree they are better. See Cryptomined channel
i want to send you a tip in $DGD man but no ETH address?
crypt0 Nat3 here is my eth adress :D 0x710f5fe57fd7047ff7348342ce870ce79b4e16e5
YOU ARE TRULY THE BEST. KEEP UP THE GREAT WORK...
Gracias Amigo. Thanks my friend. from Buenos Aires, Argentina.
Hello, nice video. By the way, where did you get that cool wallpaper with the moving mouse thing. thank you
For every one who did not managed to Bios Mod his rx 480 ,you can mod the 480 to a 580 and try again. That works for me.
great video buriedone. i went from 98->118MH/s on my 4x RX480 4gb rig!
Not bad, could be better still. With undervolting also less power intensive.
it's running -50mV per card right now, will do more testing later but i just wanted to get it running
I have a 1:1875 strap on my ASUS STRIX Radeon RX 570 4GB OC. Should I copy the 1:1500 to it as well or leave it as is? Thanks and great video.
lol, this works. I thought this tutorial might be obsolete. But this works, though it need a slight update because polaris software has been updated with new UI. Took some time, but figured it out :)
BTW i reached from 24 Mh/s to 30Mh/s on my Asus Strix Gaming Rx 580 8GB OC (Samung chip)
Great Vid! Worked! msi rx 580 30.8 mh
Thanks a lot man for this super awesome super detailed super clear tutorial. You are super!
Great video man! helped a lot thx so much
been waiting for this all week!
Hi, great video bro. I have a question, i'm about to biosmod a RX470 based Rig with Elpida and Hynix memories, when i'm editing the times with Polaris 1.5 i get a 1.1500 strip and a 2.1500, this last one is the one you edit on the video (2cond example you use), so my questios is if you also copy the 1-1.500 strip to all above, or if i should only copy the 2-2.500 strip to all 2-XXXabove and leave the 1XXX as default
Thanks men! I really like your content :-)
really working. I'm soo many thanks.
Great Video very simple and easy process thank you so much my friend i appreciate that
Thanks for this video! Subbed
Thanks, Brilliant video !
Thank you very much! Very helpful.
amazing video,thank you so much
many many thanks for your great effort I really appreciate your help and very useful tips and links
Hello, your video is excellent, I have a question, for the MSI X Gaming RX580 cards of 8GB, the values of 1750 to 2000 are copied in registers 1 and 2 ?, and what should I do with 2250 timming, is it left the same? thanks for your help.
thanks man.. quite helpful.. :)
A WARNING TO EVERYONE who may still attempt this. I followed the tutorial step by step, when i flashed the bios and rebooted, the pc didn't boot up. At first i tried to fix it by using the original on usb on startup, however it didn't work and i came to realize my card is completely bricked.
I knew the risks, and i might be able to get warranty but still it caused me stress and i wouldn't recommend it.
you need to use another card with bricked card in too so that you can flash it
If i have the same card can i fixe it?
best video and great explanation
which graphics card drivers shall I use after modifying ? I've 3x Asus strix 480 8gb, 2x MSI GAMING X 470 8gb and one sapphire 480 NITRO+ 4GB. do i need to use windows driver patch as well ? (I will be windows for mining) If yes, please reply with steps needed. Thanks, you add so much knowledge to people
the answer is 16.11.5 and no need to patch the drivers as these drive do not signature check
Thanks for the video! The only thing is that I didn't have 1:xxxx or 2:xxxx only 0:xxx on my Asus ROG STRIX-RX580-O8G-GAMING Radeon RX 580 8 Gt. However I changed value of 1750 to 2000 and flashed that rom. Default hash rate was about 24, after flashing new bios - about 27.
I already own a MSI RX580 8GB card that has been modified to its Bios settings for the sake of mining and currently I would like to return the Bios to the default settings from the manufacturer. Thanks
i have a xfx rx480 8G RS the timings mods ended up braking my bios. i was able to recover bios because i backed up and was able to rest using the duel bios (booting from the working bios switch to the bricked one wile it was still on and flashed to the normal bios for that slot and restart) i did run into another problem was after the reboot it was hanging on the MB Bios screen not doing nothing. i forced shutdown 3 times to trigger a clear cmos. what was making the hang was the uefi mode so i had to do a clear cmos to re-enable legacy mode. it seems like after flashing the gpu corrupted the security key for secure boot. here is a tip before staring the flash make sure your uefi mode is set to legacy. revert back if it was when your are done
Thanks for this video
Ure welcome, share it! :)
any1 else having problems flashing rx470 with samsung memeory?,I just got 2 cards, I went thru all the steps and flashed one card and when I restart, system doesnt even recognize moded ccard
Bravo 👌 1 subs here. 🙏
this video is wonderful tutorial video !!
Excellent video, I currently have a RIG of 6 Saphire Pulse Radeon RX580 4GB cards, I see that these cards do not have the button Bios mode, I did a manual modification of the values of the clock and obtained very little rise in speed, currently already mining with the latest AMD drivers for blockchain, i get 25.171 Mh / s on each card, please can you tell me if there is a FLASH ready to modify this card and reach 28 or 29 Mh / s, or if on this type of cards 4GB is the maximum you can get. Many thanks and greetings from Ecuador.
Hello,I got a question I have my gpus rx 580 (gigabyte,xfx,msi)Do I need to do this for every single card or all gpus in one time?Are msi rx580 good for this guide?Thanks alot
dumb question : After Moding our gpu, do we still need to OC the card with afterburner?
Also, you didn't show how to limit the power consumption, although I saw a box on Polaris where you can change the value, but I'm to afraid to do something wrong.
Cool video , yet this does not work with Asus STRIX RX470 8GB by just copying 1750 to 2000.It has 1850 straps also, what to do with that?
Amazing video dude! Thanks a lot for this, I just have one question.. For everyone, if I have two identical cards... Both are RX 570 4GB ASUS ELPIDA... Do I have to save both bios original and modded for both cards? Or can I just use the same original and modded for both cards?
MAKE SURE YOU GUYS PATCH YOUR CARDS AFTER PROGRAMMING THE BIOS MOD OR ELSE IT WONT BE DETECTED AS A DRIVER!!
What do you mean about patching your card? I think I have that problem. Mine was used for minning but I could flash stock bios but AMD driver refuses to install.
@@jotamascarell there is a system file you can download that patches a graphics card after bios modding, it helps with it after its done. I forget what its called to get it but i would just search up graphics card patching or something like that
@@Swift50cal I got it. Pixel Clock Patcher, but didn't fix my problem. Thanks anyway
hello brother thanks for those videos they're very helpful, my question is if i want to play any game after i bios mode my gpu, can i do it without a problem or should i go back to the original bios to play games? thanks
Hi. I did everything as you stated in the video, but I'm having an issue. After modding bios and using ATIFlash and restarting gpu-z shows 0mhz. Claymore wasn't locating the card and so I reflashed the original bios back. Now I am able to mine with it, but gpu-z/afterburner are still showing as 0mhz. I'm positive I changed the right straps. I went over it many times just to be sure. If there is anything I'm missing please let me know. Thank you!
Sapphire Pulse RX570 4gb Hynix
Windows 10 64bit
Latest Crimson Drivers
ATIFLASH 2.74
PolarisBiosEditor for RX5XX cards from your Mega.
Edit: FIgured it out. I forgot to patch with the atikmdag after bios mod/before restart.
Works fine now 24mh to 27.35mh....pushing for 28mh
Thanks!, I think he forgot to talk about the patch.
Thanks for the video. I have asus rx 580 8 gb oc edition, It is giving only 16Mh/s. So did programming. Display got freeze. How much time it gonna take to complete these process?
Hello, thanks for all the great vids! Question: Can I set up a 6 GPU ETC miner with different cards - all Radeon, but 3 MSI RX480s and 3 Sapphire RX470's? If so, Thank you!
could you do a video on using MSI afterburner and which settings you would use with a modded rx 580 saphire 8b nitro cards? would love to see that
U made my day!
great tutorial thank you
I've got 1900 timing also on my Asus RX480 Dual 4gb Samsung,should i do the same with it?I've managed on STRIX RX480,but this is a bit different?:)
In the beginning you said for 8gb cards you only copy the 1750 strap to the 2000 strap, but then later on in the video for the 8gb card you copied the 1500 strap to all above, which is it?
Hey, I got the RX 470 8gb Mining GPU's with no video out. They did stock mh at 15 and tweaked the best I could get them up to is 20, with bios mod and eth oc. Should I return them? I've tested them in two PC's with win 10 & 7 + linux. Blockchain drivers, etc... Thoughts? (two cards, both same results)
To restore if bricked simply have another gpu in at the same time and boot from that one. Then reflash original bios onto card noting what device number it is first.
you are king men, thanks so much... you made my life easier if you have time do a video from start to finish how to program eterium rig (bios. overclock and everuthing) you are king you ehplans very good
Dzon Pako Thanks so much! And i will!
Great work Thank you for your time ... i use a rx560 4g increased frames rates thanks.. my other question were else can i look for more or different bios mods ... great work
have a ques buddy ... is flashing a modded bios to all other same model gpu will have some ill effect or not ... like a modded bios of 1- rx580 to all other rx580 with same memory will have any bad effect ?
Hi, Thanks for the Video, seems like it doesnt work for rx480 Nitro micron.
Any tip which card is the best buy to upgrade? Planning to buy 4 new cards if they will available somedoy :D
Philipp Mayer Thats a bummer! Its rare for the micron, but can you tell me wich card it was? :)
8gb i guess. because of power consumtion, right?
It is a Sapphire RX 480 OC Nitro 8gb - bought in Germany.
+BuriedONE Blockchain would you also recommend Sapphire 570 nitro+ oc 8g? Or anything else?
So lets say you get one of the saphire nitro+ cards that has a 4GB sticker on top of the actual 8GB original printing of the package. I have modded these cards to 8GB by changing the value of the Size(MB) field in the VRAM box of Polaris BOIS editor. does the 1500mhz memory strap still get copied to all the following fields, or do we change the card to 8GB as stated above, and use the 1750 strap?
Hi, great video! I did the BIOS mod for my RX580. Had it running and started messing with the memory OC. My screen went black with no signal to the monitor. Fans still run on my GPU. Tried to reseat the GPU, different cables, etc. with no luck. Put it a different GPU and it works so the PCI slot is fine. Did I fry my GPU??? Is there anything to do about it?
I miss this modding. But sadly this is the end of GPU mining.
Doesn't worked for me :(
Sapphire RX 580 Pulse 4gb Hynix. (113-4E353CU-O4B)
Changed the straps at bank 1 and bank 2, the 1500 to 1625, 1750 and 2000
Run in Ethos, set globalcore 1200 and globalmen 2050 (without "#"), nothing change...
Run in Ethos + Claymore; set -cclock 1200, -mclock 2050, -cvddc 850 and -mvddc 850... nothing happens...
Only see a ver very little change: One flasehd card works at 24.05 in ETH and 725 in DCR, the other 5 cards, so and so, 23.75 and 715.
What I am doing bad???
The BIOS is changed sure because ATIflash said it if I try re-flash it, and I can flash the stock BIOS and re-flash the changed again. Open it in Polaris editor and see how the straps are the same from 1:1500 to 1:2000 and from 2:1500 to 2:2000.
Thx in advance for the help ;)
followed exactly for one of my 4gb 470's, hit program, computer crashed. came back with no network and windows reported card "had a problem" and was disabled. Was able to write the original ROM to it and it recovered. Wanted this to work but no joy, slightly fearful to try again for completely hosing the card...
ok bro but what about "POWER TUNE" should i change that like in ur case,because mine are higher than your?
I have a Power Color Rx 470 4gb Red Dragon with Samsung memory.. but.. it's a little different on Timing Value from the video.. it is looking more like my Sapphire RX 470 8gb Nitro+... Timing Values starts are: 0.1500 555, 0.1625 555, 0.1750 777, 0.1900 777 and 0.2000 777. My 4gb board looks more like the 8gb version on this aspect.. Should I copy the 1500 over all other values?
lots of thanks bro.......
Changes made on the amd bios mod settings, does it save save the settings into the graphics card or on the computer hard drive? Not sure if the graphics card has any kind of memory chip to save any settings applied to it.
Just curious cos I'm trying to move from windows OS to Simple mining OS, trying to see if the edited Bios mode will work on SMOS as well.
Thanks!
People are talking about flashing. Why is that? My 8x sapphire radeon 570 8gb arrived today. I will to the time strap. But what about OC and undervolt? Should I enable silent bios first?
Either I got some dud cards, or the difficulty has gone up. 2 brand new asus rx580 4gb OC (elphida memory) cards each only do 17.5MHs out of the box with claymore miner. I flashed them exactly like this video said and got up to 21.5MHs. I tried multiple miners and the numbers don't vary much from that.
According to what's seen in the video and because it's hard to find video cards, do you think this gpu model MSI Radeon RX 570 ARMOR 4G OC can be modding and can make 28 mh / s?
Hi, I have 6 sapphire pulse rx 570 cards with 4GB Samsung DDR5 Memory and I was tried to mod these cards as you shown in your video but after restart my rig , cards not working. Miner detecting card but not starting mining. Please give me your valuable guideline. Thanx
Thanks!
worked for me :) tho the temperature went up sky high on my rx480 8gb so just whattman with the fan got any advice on temps as that card is sitting around 81c at 27m/h
Careful for samsung memory only copy the1750 timings, this for both 4gb and 8gb versions and 4XX series
Superb video, really professional!
However I cannot load the bios on my Spphire Pulse 580 8GB, I have an error message from ATIflash (can not access the BIOS).
I do not have a switch like on the Sapphire Nitro + (or did I look bad?)
Any ideas ?
I was also stuck at 27 Mh/s on my Sapphire Nitro+ RX 580 8GB 256kb rom.
Here is the new one for 29.5-30 Mh/s
Running on afterburner -66 Core -30% power 1150-1200 Core clock, 2240 Memory clock. Runs stable no problems
drive.google.com/open?id=0B65rDCpvnF9xSW4zYW1EYnVaS0E
Hi BuriedONE Blockchain, thanks for your videos, they always help me. I have a problem, I have some video cards RX 580 MSI ARMOR 4GB Hynix and the timings are differents, namely not 1:1500, 1:1625, 1:1750, 1:2000 or 2:1500, 2:1625, 2:1750, 2:2000 but 2118409, 21645256, 3355496, 3357483,...etc. Which straps timing Should I change? I hope you can help me with this too.
It means Polaris cannot read your card. Change version, he says so in the video