Suggestion.. When you have easy access to the oil filter, tighten by hand only. My great uncle who worked on coal trucks for 65 years taught me that. I have done it for 45 years now. Never a problem with leaks and they aren't hard to get off.
I am also a true believer in synthetic fluids. What are you using for your hydraulic fluid??? I found a good fluid through Amsoil and Royal purple but both only come on a 55 gallon drum. Looking to see if someone local has a drum I can get 10 gallons from. What are your thoughts on hydraulic fluid?
@@AmericanAdventuresTJ we had the same thing happen with our Kubota. It didn’t fall out it just was never tightened properly from the dealer. Of course they didn’t take responsibility. And as you probably know, at least on our Kubota, by the time the low oil pressure light kicked on it was too late.
What year is this one as mine dose not have a read cap there you have to basically remove the fuel filter to get a good fill without having all over ... Mine is a 2020, 3510SE
Another person who does not idle down there tractor when they shut it off I don't understand would you shut your car off with your foot down on the gas
Good video. I'm sure you know this but all three filters should be changed at 50hrs. Also, curious what happened to the end of your loader cylinder? Paint is worn off and rusting/pitting it looks like.
Suggestion.. When you have easy access to the oil filter, tighten by hand only. My great uncle who worked on coal trucks for 65 years taught me that. I have done it for 45 years now. Never a problem with leaks and they aren't hard to get off.
Excellent video! Thanks
I thought the oil cap is black and on top , is the orange one same ? Looks like that is around the fuel system
I am also a true believer in synthetic fluids. What are you using for your hydraulic fluid??? I found a good fluid through Amsoil and Royal purple but both only come on a 55 gallon drum. Looking to see if someone local has a drum I can get 10 gallons from. What are your thoughts on hydraulic fluid?
Just wondering What happen to the previous motor? You do have a beautiful place and like your videos
Oil drain plug fell out and I didn't notice. I have been changing oil for 40 years and that has never happened before.
@@AmericanAdventuresTJ Well, thanks for that info. I'll check mine. Sheet that's bad. I always use blue threadlock on the washer. Seals and stays.
I have a 3510 coming. Just out of curiosity how much did a new engine set you back??
@@AmericanAdventuresTJ we had the same thing happen with our Kubota. It didn’t fall out it just was never tightened properly from the dealer. Of course they didn’t take responsibility. And as you probably know, at least on our Kubota, by the time the low oil pressure light kicked on it was too late.
Drain plug torqued to specs!!😁👊🏻🤣
What year is this one as mine dose not have a read cap there you have to basically remove the fuel filter to get a good fill without having all over ... Mine is a 2020, 3510SE
Nice
Another person who does not idle down there tractor when they shut it off I don't understand would you shut your car off with your foot down on the gas
Filter is installed tight and dry from the factory.
Good video. I'm sure you know this but all three filters should be changed at 50hrs. Also, curious what happened to the end of your loader cylinder? Paint is worn off and rusting/pitting it looks like.
so basically there was no point in opening the hood...
No eggs 🥚?!?! Time for chicken SOUP!!😁
Adorable and….delicious!!😳😲🤣
Does anyone know the direction of oil flow? Filter 1st or filter last. I was always taught to prefill the filter to reduce dry run time.