Print Big & Quick-ish for Under $500 - Elegoo Neptune 4 Max

Get ready to make some massive prints with the Elegoo Neptune 4 Max! This giant 3D printer will take your creations to a whole new level. With a magnetic textured PEI build sheet and a build volume of 420x420x420, you'll have plenty of room to bring your ideas to life. Plus, Elegoo even includes two full rolls of filament to get you started. Don't miss out on this epic printer - subscribe now to see it in action!
Neptune 4 Max - bit.ly/Neptune-4-Max
Neptune 4 Plus - bit.ly/Neptune-4-Plus
Elegoo Neptune 4 Pro - bit.ly/Neptune-4-Max
Elegoo Neptune 4 - bit.ly/ElegooNeptune4Pro
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeri...
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMat...
Build Series ABS - bit.ly/MatterHackersBuildSeri...
Build Series PETG - bit.ly/MatterHackersBuildSeri...
PRO Series Filament - bit.ly/MatterHackersPROSeries...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
Editing & Camera Gear:
Canon EOS R - amzn.to/3ULd2AH
77in Tripod - amzn.to/3FICPFw
Studio Lights & Stands - amzn.to/3HqSGtv
Thermal Camera TOPDON TC001 - amzn.to/3HquffP
DJI Pocket 2 4K Handheld 3-Axis Gimbal - amzn.to/3UOqmVc
Accessories Kit for DJI Pocket 2 - amzn.to/3Waszeq
Video Editing Software - bit.ly/Wondershare-Filmora-Vi...
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#3dPrinting #3dScanning #DIY #RandyMay

[@randymay]

Neptune 4 Max - bit.ly/Neptune-4-Max
Neptune 4 Plus - bit.ly/Neptune-4-Plus
Elegoo Neptune 4 Pro - bit.ly/Neptune-4-Max
Elegoo Neptune 4 - bit.ly/ElegooNeptune4Pro
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers
Build Series ABS - bit.ly/MatterHackersBuildSeriesABS
Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG
PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
Editing & Camera Gear:
Canon EOS R - amzn.to/3ULd2AH
77in Tripod - amzn.to/3FICPFw
Studio Lights & Stands - amzn.to/3HqSGtv
Thermal Camera TOPDON TC001 - amzn.to/3HquffP
DJI Pocket 2 4K Handheld 3-Axis Gimbal - amzn.to/3UOqmVc
Accessories Kit for DJI Pocket 2 - amzn.to/3Waszeq
Video Editing Software - bit.ly/Wondershare-Filmora-Video-Editing
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍

[@3DPrintSOS]

Maaan that thing is massive. Glad to hear the issue was just firmware. Looks like a great choice for you need to go big.

[@TheNextDecade]

I wish I was having your experience, I have two Maxes and Two plusses and none are behaving, all with different quirks, but mostly layer shifting. I'm gonna try the most recent firmware and give it one more chance, but these are so close to going back.

[@user-zn3gm5xv1j]

Which firmware version did you use for the test?

[@allthatandmore7252]

@randymay
Im curious as well.

[@imagesh1]

Rather disappointed in the specs for the 4-Max, and the worst part is the bed won't heat past 85c making ABS daunting if not impossible, and the (still) lack of replacement or other larger nozzle sizes frustrating. My 3-Max is AWESOME for ABS (enclosed) and I wouldn't trade that for the world right now... I'm running Mainsail/Klipper and have input shaped it (the hard way of course) and tuned to happy perfection. Your 3-Max review pushed me in that direction early in the year, and with min mods (all metal hot end) and the Klipper firmware it's a production beast.

[@bastiaanvdb6321]

I own this printer and it can easily heat past 85c and other nozzle sizes are available now

[@imagesh1]

@@bastiaanvdb6321 Thanks good to know! Can your bed get to 100C? Anything less is problematic for most ABS prints. I hope so, as I have a friend who bought one and I know he eventually wants to go ABS.