Toyota T100 3.0 project. Installing new CV axle and front shocks. Making it better. Pickup, 4runner
ฝัง
- เผยแพร่เมื่อ 3 พ.ย. 2024
- A smoother ride and 4wheel drive. The T100 just keeps getting better.
@funjunkiegarage
throneofiron.b...
#toyota4wd #doitdamnit #Funjunkie #myhappydriveway #toyota #alwaystoyota #ohwhatafeeling #tundra #tundralove #lovemytundra #tundraoffroad #tundraoffroad4x4 #toyotatundra #toyota4x4 #yota #sr5 #teamyota #overland #offroad #tundramafia #teq #1stgenTundra #2uz #2uzfe #toyotafreaks #toyotalife #tundra4life #tundralife #stellarbluepearl #tundraadventurestoyota #alwaystoyota #ohwhatafeeling #pickup #pickuptruck #pickup4life #pickupoffroad #toyota4x4 #toyota4wd #yota #teamyota #overland #adventure #offroad #explore #teq #22r #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife Toyota,4wd,1st gen,3rd gen,4runner,Tundra,T4,Funjunkie,White,Blue,offroad,off,road,adventure,fun,camping,towing,install,mods,modifications,overland,rig,4x4,build,homemade,DIY,fab,fabricate,project,wheeling,welding,armor,sliders,skids,skid plate,boatside,bumpers,lift,lifted,bumper,locker,lockers,IFS,double locked,lift,lifted,4.88,4.88s,5100s,Bilstien,limited slip,airbags,Red,Tacoma,3.4,5vz,4.7,2uz,wheelin,enjoy,T100
Side note for anyone else that’ll be doing this. I did my axles today, I have a 1995 T100 4WD and I definitely had to disconnect the sway bar links. (Not a big deal, as I was replacing them anyway.) but I was able to do it without disconnecting the shock, just make sure you can jack up the control arm. Get the axle as horizontal as possible and you should be able to take it off the 6 studs pretty easily. Good luck y’all
Awesome.
Thank you for sharing this information.
I'm sure it will be helpful.
Helpful and informational, thank you😁
Awesome.
You're welcome.
Thank you for watching and for the compliments.
Helpful video 👍
Thank you.
I appreciate that.
Thanks for watching and commenting.
Hello there, I own a 1998 Toyota t100 fail state inspection.
Passenger side upper control arm took off the old one, no problem but now I’m trying to install new arm and I can’t.
Any tips o tricks you can provide me. Thanks
Need more information.
Why doesn't it fit?
What is not fitting? Did you get all new and the bolt holes dont line up?
Mine is not that easy as you think I got a shock in the way swaybar in the way so the whole spindle has to come off and I got a 1995 T100
I know the sway bar stops it but I was sure the shock could stay on. But if you had to remove yours, must be in the way.
Enjoy your project
Thanks for watching and sharing your experience.
I appreciate the support.
Thank you for the video! My CV on my driver side is about to go out soon so i'm planning on replacing it. And while I have the axle apart i plan to throw on some manual locking hubs. Did you remove any other parts besides the sway bar and the shock to remove/install the CV?
You're welcome.
No I didn't have to remove anything else.
The shock does not need to be removed to replace the CV axle. I just had mine off because I was replacing them anyway.
Enjoy your project. Hope it all goes smoothly.
Thanks for watching and commenting I appreciate it.
@@funjunkiegarage So the only part that really needs to be removed is the sway bar?
Thanks for the upload, looking forward to more T100 videos. My T100 is getting to the point where i need to start doing a refresh maintenance on it. Your videos will be a great help
That's all I had to have out of the way.
I've done a few videos on it so far, hope you find them helpful.
I hope to have it a long time and do much more with it.
I'm sure you enjoy yours as well.
I appreciate you watching and supporting my channel.
Is it the same for a 95 ?
Yes, the same.
just had a ball housing on my cv go out on my dads t100. Any recommendations. OEM, or aftermarket?
Always OEM if available and fits the budget.
I use the Trakmotive as an affordable alternative with much success.
Thanks for watching and asking.
I appreciate the support.