Dyson SV 11- Brush doesn't spin after cleaning... Next step!

If you have cleaned out your Dyson Power Head p/n 248485 and it still does not want to spin, try cleaning or lubricate the bearing in the brush centering bushing.

[@itsalexikk]

Thank you for your video! I lubricated the bearing, but then I had to manually spin the turning mechanism (at the opposite end) and keep turning the vacuum on and off (carefully). That somehow worked, in case anyone is struggling!

[@alexissutyak2493]

Thank you!!! Was at my wits end watching by videos that suggested cleaning it- you saved us!

[@ruthgiannandreaful]

Bro I must have watched a dozen videos and none of them had the issue I was having. THIS is what I was looking for! Thank you so much it fixed my problem!!

[@akcd907]

Glad it helped you out! It's great I could share the info.

[@user-mk9id4ko9t]

Thank you for your advice! Now it works!!!! 💙😃

[@anchorpoint009]

This was the problem with mine- helped alot. Thank you !

[@LaJewel]

Finally - this is the model I have. It's cleaned out everywhere else. This is a major design flaw.

[@zanzibarwaala8336]

This fixed it. Thank you!

[@rosannam1113]

Thank you underrated hero!

[@user-zq8uv3rp4v]

This fixed it!! thank you !!!!!!!

[@dannybarlev]

excellent! thanks

[@misterleif]

This fixed it! You're a genius! Spent hours cruising TH-cam looking for a fix. Was just about to give up when I found yours. Thanks!

[@akcd907]

Hey Leif, glad it helped you out and got your Dyson up and running. That is what is so nice about TH-cam... people helping each other! I have found many "fixes" on TH-cam myself, you just have to know how to ask for what you're looking for and the answer is there!

[@nionoua]

Super like for you thanks man

[@anastasiiaikramova1824]

That’s what I need 👍Thank you

[@akcd907]

Your welcome.

[@chaz33xxx]

Thanks…the world of Dyson problems is multi dimensional…

[@Leo-pc7nr]

salve questo analogo motore l'ho smontato tutto perchè si era inchiodato completamente solo che nel rimontarlo mi sono distratto e non ricordo se i tre ingranaggi in plastica che ruotano all'ingranaggio principale, devono perfettamente allinearsi con i tre supportini che si trovano all'interno del contenitore in plastica. Hai forse un video ove posso vedere correttamente la ricomposizione?
hi, I disassembled this similar engine completely because it was nailed down completely, only that when I reassembled it I got distracted and I don't remember if the three plastic gears that rotate on the main gear must perfectly align with the three supports that are inside of the plastic container. Do you perhaps have a video where I can correctly see the exact recomposition of the ENT? I thank you

[@tasanasturge6401]

I’ve been trying WD 40 but I think I might need the penetrating oil

[@akcd907]

Did you spin the drive after spraying the WD-40 or penetrating oil, I had to spin it by hand first to get the the drive to spin by itself.

[@danniepushkin5849]

Where can I buy the "penetrating oil"? 00:50

[@akcd907]

Any hardware store would have penetrating oil.

[@katarzynatomczyk1820]

🥺my dyson d33 brushes don’t work