Dyson vacuum roller head not spinning - EASY DIY fix!
ฝัง
- เผยแพร่เมื่อ 23 มิ.ย. 2021
- Dyson Vacuum Playlist
• Dyson vacuum pulsating...
Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases.
www.amazon.com/shop/diywithmi... - แนวปฏิบัติและการใช้ชีวิต
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Dyson Vacuum Playlist
th-cam.com/video/SesOXdeyT_A/w-d-xo.html
Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases.
www.amazon.com/shop/diywithmichaelborders?ref=inf_own_diywithmichaelborders
thank you soooo much! The head hadn't worked for over 12 months and then i found your video before buying a new head!! You have told me how to fix it and it worked!! Thanks again! Youre brilliant!
You are welcome, that’s so cool you got it back working after having it out of commission for that long.
😁👍🧰
Thank you! I had pulled apart the entire head and thought it was a lost cause before finding your video. You made it so simple, much appreciated!
Thanks for watching, we are happy to hear you found our video beneficial.
Please let us know if you have any questions and hey if you’re into crypto, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time. 🧰
Thank you, Michael! Simple fix, but wouldn't be without help from good people like you.
Good morning William & welcome to the DIY Raptor Club, you are very welcome. Us fellow DIY’ers need to stick together!
Enjoy your upcoming weekend. 😎👍
I thought my power head motor had gone bad. It was totally the built up dust up near the trigger area. This video is awesome, thank you!
That fixed my brush head!!! Thank you so much!!!
YOU ARE AWESOME!! YOU JUST SAVED ME A LOT OF TEARS!
Good morning Janine, so happy to help. Let us know if you have any questions. Enjoy your week.
Excellent explanation. Thank you. Now I can continue on with my cleaning. Thank you
@@chriswatts1909
We are honored to help! 😁👍🧰
I have a different model but it worked! Thanks so much!
Rubbing alcohol / Contact Spray - Thank you!!! I knew the motor and battery worked and knew I didn't need to buy a new one yet; just a wipe with cotton bud in the right place!
You are welcome. 😁👍🧰
Thank you! Sorted it out!
Thanks Michael. Worked a treat!😊
Great to hear, and thank you for reaching out to us.
Exactly my issue. Fixed it in less than 5 minutes without taking the roller apart. Thank you!
You are very welcome. 😁👍
A true testament of the Power of DIY!
😎👍
Thank you very much!! You just saved me buying a new vacuum!! ❤
Good morning ☕️ that’s awesome to hear. Buying a new vacuum can get expensive.
Awesome job making it a DIY project, enjoy that rewarding feeling. 😁👍
Thanks, fixed my dyson v7 with your easy explanation
Sweet! 😁
Good morning David, thanks for sharing this on your early Saturday morning, it means the world to us.
Please let us know if you have any questions. Enjoy your weekend.
Cleaning the leads fixed mine. Thank you!
Great to hear, thank you for reaching out to us. Awesome job making it a DIY project. 😎👍
Thank you! Saved me on having to buy a new Dyson. Had this one for 15+ years.
We are honored to read this. Amazing job keeping your Dyson running for 15 years, that tells us you take incredibly good care of your belongings. 👍🧰
Thanks so much, this fixed it for us 😊
Awesome, you are very welcome Rosie. Thanks for watching & sharing this, enjoy your weekend.
😎👍🔧🔩
Wow. Worked perfectly. Thanks.
Good morning, worked perfectly is what we love to hear! 😎👍
Let us know if you have any questions. Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
It worked Thankyou so much Micheal love you
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Great to hear, and thanks for reaching out to us. Much appreciated! 😁
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Thanks for the advice it helped a lot
Thanks for watching, so happy to help. Let us know if you have any questions. 😎👍
Perfect... This worked a treat thanks so much
@@marknicholson7785
Good morning ☕️ you are welcome.
This worked perfectly, thank you
Ian, thanks for sharing this on your Saturday morning. Great to hear it worked. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Worked for us, thank you buddy
Good morning ☕️ you are welcome. Just sat down to sip our coffee, we really appreciate you taking a moment to leave this comment. 😎👍🧰
Big help, you're the man
We appreciate that, thank you. Our goal continues to be getting you the info you need without wasting your valuable time.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Perfect!! Thank you!!
Thank YOU. 😁👍
Fixed. I got 7 animal cordless same principle. Cheers merry Christmas Dec 24 23
Thanks so much! It fixed our vacuum.
Hey Dan, you are very welcome. Thanks for watching, enjoy your upcoming week.
😎👍
😢😢😢😢😢
Thank you this fixed it
Awesome, thank YOU! Great job making it a DIY project. Let us know if you have any questions and hey if you’re into crypto, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Thank you!
You are welcome, thank YOU!! 😁
It worked, thanks
You are welcome. 😁👍🧰
Dude!!! Thank you!!
You are welcome, we are here to help!
😎👍
worked 👍
Awesome job making it a DIY project. Definitely paves the way for a better and more enjoyable weekend. 😁👍
Didn't work on mine....so, something major must've broken. But, I did learn quite a bit about how this thing works. So, thank you for that!
Thanks for watching, that’s a bummer. Did you clean the internal filter sock and chamber?
@@DIYwithMichaelBorders Yup....cleaned everything. Did a ton of cleaning prior to watching your video to see if I missed anything. I think the drum that actually turns the brush broke in some way. It happens. We've had this Dyson for going on 8yrs now, and we've replaced a few parts already (including the battery). So, if dropping $100 bucks on a new head buys me another couple of years, then I'll still be happy. Although, I could b*tch for a month about the battery life (even with the new battery). Is what it is, my friend. Kudos for this video, it looks like you helped a lot of people.👍
@@phillamoore157
Not a bad idea, getting a new head may very well add several more years to the life of your Dyson.
@@DIYwithMichaelBorders Yeah. That's one of the things I like about that company. There's not a whole lot you can't replace on those vacuum's. The wife and I weren't in a position to drop $500-700 on a new Dyson simply because of one part. So, if this new part buys me another few years, then it's money well spent. I'd be interested in knowing if anyone has the models with the better batteries to see how much run-time they're getting. That's my only complaint with Dyson.....and it's a big one. Even the new battery I swapped out only get's maybe 15min run time on "Max Suction". I'm using the V8 "Animal" model....
@@phillamoore157
100% understandable. We hope to hear back from you after you install the new incoming part.
Have a v11 outside and there's no dirt, no blockage, connectors fine (regular torque head spins, per head spins, the outsize head doesn't at all). This is following it getting stuck on a rug. Any thoughts? It's definitely not the connector or the roll being and to spin by hand....
Did you end up figuring it out? I'm having rhe same problem woth my V10 and even bought a new head that also stopped spinning...ugh!
My V11 can’t spin any brush anymore either :(
my v10 is different than this. where could I clean the v10? took the roller all apart cleaned it, wasn't really dirty, one roller head I have work but the other main one does not
so I dont think its at the main unit has to be with the roller head, getting no power.
Thanks for watching & welcome to the DIY Raptor Club. Any update? Electrical connection points on each end of all parts are crucial.
We recommend taking the roller apart from the shaft as well as the shaft apart from the vacuum motor/canister assembly.
Next, ensure all electrical connection points are clean and not corroded, rusted, or filled with dust or debris.
Unfortunately, this didn’t help mine, but do appreciate the great video. I’ll be following for other DIY
Thanks for watching, any update? Below is a link to our Dyson video PlayList. It contains several videos that we hope you find helpful.
th-cam.com/play/PLjCXOz8TSkZl8mwMh5_fpOLrd6cXWJXAZ.html&si=U3dQgj7lv0DH9K7P
We really appreciate you subscribing to our channel, we have subscribed to yours. Keep us posted, and let us know if you have any questions.
My wand contact pins are bad, one pin is bent and broken! Can te wand be repaired?
Thanks for the reply, that part is replaceable for sure. Either purchase new or you can hit eBay for a used one.
Hey micheal this isn't the case with my hoover the head don't spin due to me not cleaning it correctly as I've replaced the new head and it spins. I have got the motor wet via cleaning I want to attempt to clean the old one in hope to fix it how do I take it apart
@@bensammut370
Thanks for watching and reaching out to us. Any update?
Very helpful but mine still did not work
All noted about lack of electrical contact but my trouble seems a bit different. The roller does not seem to rotate freely but is a bit raspy. Sometimes there is enough torque from the motor to rotate the roller but not always. Any ides, please? Thanking you in advance!
Thanks for watching, have you verified head is clean and clear of all string, hair, debris…
There can be dirt particles inside roller wheels as well. A major cleaning is recommended.
I have dismantled and cleaned but things have taken a turn for the worse! For the age of the machine, there was a little dirt; would have expected more. Anyway, reassembled and brush spun but still a bit raspy but has now jammed so solidly that the roller cannot be removed. If I free the end, motor turns so that part seems OK. However it might be, it may be that there is some breakage inside the roller. If all else fails, may have to saw in two and get a new one.
@@jozefbubez6116
That’s no fun, but its good to hear you have determined the issue. You can maybe find a used one on eBay or buy new part from Dyson.
Hello Michael and many thanks!
Managed to replace roller following surgery to remove old one. Turns out that the user regularly dunked the assembly in water to clean. Have explained that this is not a submersible item so hopefully the problem will not get worse.
The cleaner is some years old and the model number label rather worn. There is a motor onto which the roller sits the drive being via a roll-pin at right angles to the shaft if this helps? At one end, there appears to be a sealed ball-race of some kind but difficult to access so I've given it a spray of light lube which has freed up the bearing sufficienly to enable the roller to spin consitently. I'm inclined to leave as is for now as it's not too obvious how to get to the bearing.
@@jozefbubez6116
Thanks for the follow up, submerging unit in water is not a good idea. 😲
Sounds like you’re back up and running, that’s great news.
Thanks for posting but not worked for me. Have two heads with brushes on; neither spins, with or without the extension tube in between the motor and the head. Leads me to believe power is not getting from the head to the brush. May invest in a new canister and see if that works but it's a gamble. Otherwise fork out for a new Dyson (and I only replaced the battery a few months ago!)
Thanks for watching & that’s a good route to take at this point. If it’s not too much to ask, we are curious on hearing back from you after your new canister arrives.
Hope all is well Mark.
@@DIYwithMichaelBorders I'll let you know. At the moment on a chat with Dyson to see what else they might suggest.
@@DIYwithMichaelBorders So, eventually they suggested it's not the bin/canister, it's the main body and offered to send me one for GBP 37.50. According to their diagnostic tool this will fix it. Should be with me in 5 working days. That price is surprisingly low and a lot better than forking out for an entire new V7. We'll see what happens.
@@markkeohane9850
😎👍
@@markkeohane9850
Not a bad update at all, friendly price is a great thing. Keep us posted.
All my connections on my Dyson V8 are very clean but no electricity is going down the wand (pipe) to the spinning brush (motor head).
I switched the parts out with another V8 (various combinations) and the brush spins.
The problem seems to be no electricity coming from the contacts on the main body to the canister which in turn feeds the wand.
The motor runs the cyclone but there's no electricity going to the spinning brush.
Thanks for watching & sharing your experience. You will want to inspect as much of the connection points as possible to ensure they are perfectly clean & clear of dust, lint, rust, corrosion...
You may be faced with having to purchase a new part which can be pretty friendly by doing a quick Internet search. Please keep us posted.
😎👍🔧🔩
Hi Brian, I have the exact same issue with my v8. Did you ever manage to find the problem and fix it?
@@stephaniegreen4517 I have sort of given up for the time being. But, I think it might need a new canister (the clear part that collects the dust).
From what I gather there is a wire in the top of the canister that carries the electrical current from the motorhead main body to the pipe leading to the brush.
I have not confirmed this.
@@DIYwithMichaelBorders I have the same issue with a V8 SV10. I believe it is my motorhead not the canister and I have a second same machine and when interchanging parts that is what is consistently failing. I wonder if the motorhead can be fixed?
@@andreag.pollack635
Thanks for watching, have you also thoroughly cleaned all electrical connections?
the thing is mine is brand new and it clean but it won’t spin on the ground but upside down it does😭
Thanks for watching, a brand new vacuum shouldn’t be giving you these problems. Is vacuum covered under warranty?
@@DIYwithMichaelBorders yes it is im confused too
@@zxhra
Are you able to return it for a new one?
No three was hair in my Dyson so it did not spin
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
That will definitely cause havoc on the overall operation of the vacuum. We hope the video helped.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Sounds like Dyson has a defect in manufacturing and need to address this.
Thanks for watching & sharing your thoughts. 😎👍
Thank you!
You are welcome, and thank YOU!