17:39 Oh man for amount of money the stuff costs, i would have expected better fit. The big pieces left and right in relation to the center hatch would drive me nuts……thanks for sharing and your hard work to produce content!
Thanks so much for taking the time to make this video. I'm in the research phase of choosing a product and deciding whether or not to install it myself. Great walk through and super relevant information. Thanks again !!
Thanks for the great feedback!! be sure to check out my other videos, I have also made a comparison video on how to clean the Sea Dek and I will be doing an upcoming video in the next month or so on the 1 year review after installing, and how it's holding up.
I'm glad TH-cam recommended this video. My boat is a Bluewater/Reinell 207 hull and the floor is marine plywood, not fiberglass, so this would look horrible if the complete floor is not covered. You saved me a ton of $$$s and hours of time. Although, adding this to our swim deck is still tempting. Great job on the video.
my seadek is 10 years old and still fine. it has a few dog claw scratches and nicks in it, and i had a use surface contact cement to re-glue some pieces down, but otherwise the product lasts very well tips for making it last 1. dont leave seadek exposed to sun. i no zero discoloring or fading from sun exposure even after 10 years, but in general sun destroys most things so minimize sun exposure 2. dont let any water stay ponding on seadek - will cause the glue to release and piece will need reglued 3. its not harmed by any chemical ive used to clean the boat 4. grease and all other types of contaminants can get scrubbed out of seadek no problem 5. it can get scratched/chipped, so keep metal objects like anchors off of it enjoy your seadek
I may be missing this answer but how much did the kit cost? I have the exact same boat basically mine is an 03 207. I’m looking to get this done. The back of the carpet is deteriorating and black flakes are getting everywhere. Also I’d love to ask you a few questions about the boat if your ok with that.
Great video. Trying to decide what deck product to replace my snap in carpets. Can you tell me how much you paid, my Monterey boat is about the same size and cut outs as yours. Thx
I have a 2005 SeaRay 240 sundeck, can you please tell me why you went with the grey and black, it looks great. My outside of the boat is dark Navy Blue, I thought about using Navy Blue on the swim platform, with a bimini blue or black underneath, what do you think?
I went with grey and black to match my interior vinyl colors. When it comes to color choice I would take a look at all the combinations that they have available and I bet one will stand out to you!
I was thinking of putting this on my tritoon can it be installed on existing lanolium type material it’s in good shape it just has some stains I want to cover up it looks like this should work ?
I first of all have to commend you on the break down . You were very informative on what you did and how you did it . But there was the one area that would drive me crazy, the area around the hatch toward the back of the hatch looks disproportionate, so this is my question , did you overlook that part of the layout or did seadek just cut wrong ? I am not trying to belittle what you did at all so please don’t think that.I am just trying to figure out why it looks that way . You had precise template ! ( I don’t think that you would have drew it that way )
The "Find Your Boat" section doesn't work anymore. So, you can't get a precut set for your particular boat. You have to have a "dealer" come out and template your boat, and/or install it for you. That brings in a huge amount of additional labor cost. I don't know why they did that, but I image it's just like car dealerships. Reduce their costs, and increase yours. I'd love to buy a precut set up, but you can't anymore. Might as well buy new snap in carpet.
Thanks for the feedback!! At the time I purchased, the total price with shipping (not including the dry fit kit) came out to $1,912.98. Here is a link to the roller I used in the video: amzn.to/37u0BEb
I paid $1,912.98 but the cost is different for every kit, some considerably less, some more expensive, just depends on the boat and how much you are tying to do. You can also buy sheets of the material and cut it your self. I was in Cabela's the other day and I was surprised to see that they had a roll of it for sale. So you have some options. First thing I would do is call Seadek and see if they have a kit for your exact boat and than go from there. Thanks for watching the video!!
Sadly the swim platform and the walk thru throws us over the top, I paid $1,912.98 (that was total with shipping). You can buy the cockpit and swim platform kits separately and like I said I would check around with some dealers to see if you can find a better price.
@@MileHighCampers that's not a bad price, someone I know paid 1800 and that was on a much smaller boat. Overall the stuff not cheap and it looks great. Nothing is cheap on a boat
Oh my goodness that is ridiculously high and you did the install and only last 5 to 7 years well that made my mind up really fast I'm sticking with the carpet wonder how much that cost to pay for install dang near as much as the whole boat thanks for video and price information
I paid $1,912.98 but the cost is different for every kit, some considerably less, some more expensive, just depends on the boat and how much you are tying to do. You can also buy sheets of the material and cut it your self. I was in Cabela's the other day and I was surprised to see that they had a roll of it for sale. So you have some options. First thing I would do is call Seadek and see if they have a kit for your exact boat and than go from there. Thanks for watching the video!!
You did an awesome job but honestly with how expensive these things are why not pay for the installation, if they mess it up they have to fix it if you messed it up then its your problem!
I like the idea of this product, but it is just a matter of time before it will fade, peel in the corners and trying to clean around the ends where build up will occur. Just my opinion.
my seadeck is 10 years old and no fading. it will eventually start to peal but i just reglued it down in some areas with contact cement and repair seems permanent
17:39 Oh man for amount of money the stuff costs, i would have expected better fit. The big pieces left and right in relation to the center hatch would drive me nuts……thanks for sharing and your hard work to produce content!
100% agree. The two lower corners around that cut out are not even close to being the same.
Awesome video! Thank you for making this. Very informative
This is extremely well done, great breakdown and I’m not even getting it
I appreciate the feedback and thanks for watching!!
Thanks a lot for this very helpful video , I’m in the template stage with seadek
Thanks so much for taking the time to make this video. I'm in the research phase of choosing a product and deciding whether or not to install it myself. Great walk through and super relevant information. Thanks again !!
Thanks for the great feedback!! be sure to check out my other videos, I have also made a comparison video on how to clean the Sea Dek and I will be doing an upcoming video in the next month or so on the 1 year review after installing, and how it's holding up.
Mee too been looking at different flooring options….this presentation has sold it…thank you
I'm glad TH-cam recommended this video. My boat is a Bluewater/Reinell 207 hull and the floor is marine plywood, not fiberglass, so this would look horrible if the complete floor is not covered. You saved me a ton of $$$s and hours of time. Although, adding this to our swim deck is still tempting. Great job on the video.
Glad the video helped you out! Thanks for the great feedback, I really appreciate it!!
Subbed for the follow up after summer
Looking good so far... thanks for letting me know that is of interest to you, I will do an update in fall!! Thanks for the follow and for watching!
That was the best video yet.
Thank you! But the next video of the upholstery should be pretty cool!!
Im curious how much weight does this add? it sure looks great. and how hard is it to replace if you wears out? Thanks
Great information!
Glad it was helpful!
my seadek is 10 years old and still fine. it has a few dog claw scratches and nicks in it, and i had a use surface contact cement to re-glue some pieces down, but otherwise the product lasts very well
tips for making it last
1. dont leave seadek exposed to sun. i no zero discoloring or fading from sun exposure even after 10 years, but in general sun destroys most things so minimize sun exposure
2. dont let any water stay ponding on seadek - will cause the glue to release and piece will need reglued
3. its not harmed by any chemical ive used to clean the boat
4. grease and all other types of contaminants can get scrubbed out of seadek no problem
5. it can get scratched/chipped, so keep metal objects like anchors off of it
enjoy your seadek
Cool
This is awesome better than paying them to do it!
Nice job thanx for the video perfect timing
Thanks for watching!!
I may be missing this answer but how much did the kit cost? I have the exact same boat basically mine is an 03 207. I’m looking to get this done. The back of the carpet is deteriorating and black flakes are getting everywhere. Also I’d love to ask you a few questions about the boat if your ok with that.
Great video. Trying to decide what deck product to replace my snap in carpets. Can you tell me how much you paid, my Monterey boat is about the same size and cut outs as yours. Thx
I have a 2005 SeaRay 240 sundeck, can you please tell me why you went with the grey and black, it looks great. My outside of the boat is dark Navy Blue, I thought about using Navy Blue on the swim platform, with a bimini blue or black underneath, what do you think?
I went with grey and black to match my interior vinyl colors. When it comes to color choice I would take a look at all the combinations that they have available and I bet one will stand out to you!
Thanks. Great video. Looks great
Thanks for the great feedback, much appreciated!!
Just now seeing this video. Awesome job! Very helpful. Assuming this is the second year, how is the seadek still holding up?
this is a fake video.......wheres the beer? lol good video and your work is on point. thanks and wish me luck
Couple of beers would have made for a better video for sure!! LOL Cheers!!
Awesome video, thanks. I'm your 500th like :) How has it held up?
Thanks!! So far so good, will probably do an update video once I break it out of hibernation!
I was thinking of putting this on my tritoon can it be installed on existing lanolium type material it’s in good shape it just has some stains I want to cover up it looks like this should work ?
I first of all have to commend you on the break down . You were very informative on what you did and how you did it . But there was the one area that would drive me crazy, the area around the hatch toward the back of the hatch looks disproportionate, so this is my question , did you overlook that part of the layout or did seadek just cut wrong ? I am not trying to belittle what you did at all so please don’t think that.I am just trying to figure out why it looks that way . You had precise template ! ( I don’t think that you would have drew it that way )
Nice Video and looks great! was that the 9mm in smoke gray and black faux teak and brushed? Going the same route. thanks!
Thanks for the great feedback!! I got the 6mm Storm Gray / Black, Faux Teak, Brushed.
Easy to follow directions. Thanks.
Thanks for all the support K LR!!
The "Find Your Boat" section doesn't work anymore. So, you can't get a precut set for your particular boat. You have to have a "dealer" come out and template your boat, and/or install it for you. That brings in a huge amount of additional labor cost. I don't know why they did that, but I image it's just like car dealerships. Reduce their costs, and increase yours. I'd love to buy a precut set up, but you can't anymore. Might as well buy new snap in carpet.
They don’t have the find your boat option anymore
what about the snap holes once the carpet was removed? Do you have to fill them in with a product or just cover with seadek?
I just installed over the holes, but I assume you could fill in the holes if you wanted to do.
I used white silicone
There is no option to shop by boat on the website now? Any idea how we do this?
I would call them or a local dealer to find out if they have a kit for your boat.
Nice job, thanks. How much did you pay for this seadeck? You got a lot of pieces. And what roller you are using? Thanks
Thanks for the feedback!! At the time I purchased, the total price with shipping (not including the dry fit kit) came out to $1,912.98. Here is a link to the roller I used in the video: amzn.to/37u0BEb
Have a question if I might ask, What was your total cost for the seadek. I have a 2006 in blue and looking to upgrade
At the time I purchased, the total price with shipping (not including the dry fit kit) came out to $1,912.98
What was the final price
So what this this cost to do?
I paid $1,912.98 but the cost is different for every kit, some considerably less, some more expensive, just depends on the boat and how much you are tying to do. You can also buy sheets of the material and cut it your self. I was in Cabela's the other day and I was surprised to see that they had a roll of it for sale. So you have some options. First thing I would do is call Seadek and see if they have a kit for your exact boat and than go from there. Thanks for watching the video!!
Hi a very nice video, any idea haw much it would be for a Monterey 180 FS flooring thanks for reply.
All the prices vary, best way to find out how much a specific kit would be for your boat would be to give seadek a call.
@@MileHighCampersh
I'd guess around 2K give or take a couple hundo
Was the sea deck expensive
It varies depending on the floor plan of your boat.
Do you mind saying the price you paid? I have the exact same boat
Sadly the swim platform and the walk thru throws us over the top, I paid $1,912.98 (that was total with shipping). You can buy the cockpit and swim platform kits separately and like I said I would check around with some dealers to see if you can find a better price.
@@MileHighCampers awesome thank you!
@@MileHighCampers that's not a bad price, someone I know paid 1800 and that was on a much smaller boat. Overall the stuff not cheap and it looks great. Nothing is cheap on a boat
Good luck they warranted mines 3xs. Heat shrinks it! When this one messes up I’m going back to carpet! Seadek looks beautiful but doesn’t last
Oh my goodness that is ridiculously high and you did the install and only last 5 to 7 years well that made my mind up really fast I'm sticking with the carpet wonder how much that cost to pay for install dang near as much as the whole boat thanks for video and price information
Could we get a price of what it cost you to do this!?!?
I paid $1,912.98 but the cost is different for every kit, some considerably less, some more expensive, just depends on the boat and how much you are tying to do. You can also buy sheets of the material and cut it your self. I was in Cabela's the other day and I was surprised to see that they had a roll of it for sale. So you have some options. First thing I would do is call Seadek and see if they have a kit for your exact boat and than go from there. Thanks for watching the video!!
Ok thanks 💪🏾💪🏾💪🏾
What color is that?
6mm Storm Gray / Black Brushed
Why not give us the pricing? Oops, I found it in the comments.
Pricing can vary a lot depending on the layout of your boat too.
You did an awesome job but honestly with how expensive these things are why not pay for the installation, if they mess it up they have to fix it if you messed it up then its your problem!
I like the idea of this product, but it is just a matter of time before it will fade, peel in the corners and trying to clean around the ends where build up will occur. Just my opinion.
These are all legitimate concerns, I will post an update video after this coming summer describing how it's holding up.
😊the absolute worst thing you can do to a boat.
my seadeck is 10 years old and no fading. it will eventually start to peal but i just reglued it down in some areas with contact cement and repair seems permanent
First 🤘🤘
Awesome!! Thanks for the support!!
SeaDek is a trash product sold by a trash company