Geweldig duidelijk gedaan. Ik denk dat het slim is om die extra lijm te gebruiken. Zeker op plaatsen die niet of nauwelijks zijn afgebakend. Vraag: je gaat het de kieren niet afkitten?
Bedankt voor je vriendelijke woorden. Na de installatie heb ik de randen afgedicht met kit. Het plan is om langs de randen een soort afwerkingshout te gebruiken om ze volledig af te dichten en te voorkomen dat de randen loskomen van de onderkant. Ik heb ChatGPT gebruikt voor vertaling, ik hoop dat het correct is.
Seems to be fine, but in fairness, Ive not been able to use it. My back was re-injured shortly after this video was posted, and I havent been able to finish the project.
Unfortunately due to a back injury right after I made this video I wasn't able to finish the boat or test it in a real world environment. Ive read from others that thiers is holding up well UNLESS the boat sits in the open sun everyday. Then it begins to break down over time. It seems covered storage is a life saver for it.
Absolutely. It would make a great all purpose flooring. Its ever so slightly spongey to walk on. I would HIGHLY recommend using 3M heavy duty spray adhesive or even a flooring adhesive you trowel down. Itll definitely work though.
I felt that roll-in to the boat😆
Me too... for 3 days! lol
Thanks bro! Im from South Louisiana too my man good shit lol!!👍🏼
Sweet!!
Geweldig duidelijk gedaan. Ik denk dat het slim is om die extra lijm te gebruiken. Zeker op plaatsen die niet of nauwelijks zijn afgebakend. Vraag: je gaat het de kieren niet afkitten?
Bedankt voor je vriendelijke woorden. Na de installatie heb ik de randen afgedicht met kit. Het plan is om langs de randen een soort afwerkingshout te gebruiken om ze volledig af te dichten en te voorkomen dat de randen loskomen van de onderkant. Ik heb ChatGPT gebruikt voor vertaling, ik hoop dat het correct is.
What was on the bottom of the boat that you glued the EVA foam decking to?
Plywood painted with oil based enamel. Sadly I havent finished that boat but the EVA is stuck down forever!! Lol
what size roll of evo foam did they send you ? i’m trying to do a 14ft by 60’ floor.
I had two 4ft x 96" rolls. Ive only opened one so far for this section of boat and have half left.
How’s it holding up? Any ill effects of using the gorilla adhesive?
Seems to be fine, but in fairness, Ive not been able to use it. My back was re-injured shortly after this video was posted, and I havent been able to finish the project.
How has it held up after months of use?
Unfortunately due to a back injury right after I made this video I wasn't able to finish the boat or test it in a real world environment. Ive read from others that thiers is holding up well UNLESS the boat sits in the open sun everyday. Then it begins to break down over time. It seems covered storage is a life saver for it.
What spray did you use ?
3m Heavy Duty spray adhesive. Be sure to follow the directions. Once its stuck ITS STUCK!
Can this be used in an RV?
Absolutely. It would make a great all purpose flooring. Its ever so slightly spongey to walk on. I would HIGHLY recommend using 3M heavy duty spray adhesive or even a flooring adhesive you trowel down. Itll definitely work though.
@@loganreviewsit Umm....you are shown using Gorilla spray glue in the video...not 3M.
@@neurosis333 Yes thats true and it works great. My preference has always been 3M but really any quality spray adhesive would work fine.
Only lasts two years in Florida sun. Watch my video of how it ruined my gelcoat.
Im sure if the boat is in the sun all day everyday, most foams would deteriorate.
Thats why u get a boat cover
@@tyjiritaylor5398 I fish everyday. And when boat is home it’s under cover. A boat cover does little in the Florida sun.
G A R B A G E
You had a bad experience with it? Lets hear about it.