ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2019
- Hello..
Today a drill hack..
Easy way to replace a drill chuck Becomes keyless drill chuck..
may be useful
I Hope You Enjoy This Video. If You Like This Video Then Click On Like And Subscribe My Channel For More New Videos.
THANKS FOR WATCHING
Please like, subscribe and share
Subscribe here
/ @masbarlinwoodworking
![[TH] VCT Pacific Stage 2 - Week 2 Day 1 // RRQ vs TLN | DRX vs PRX](http://i.ytimg.com/vi/_OWt_-Lu3AE/mqdefault.jpg)
I spoke with a professional tool repairer today and he said that often it's just not possible to get the chuck off a cordless drill. He said it's because they can be so powerful that the chuck is effectively locked on and that if you try the 'hitting the alan key in the chuck method' you'd end up bending the spindle.
So you have to Go ! And buy Another one ! For Peace of Mind !
Ayus sir. Magpapalit ako ng chock ng drill.
I a had thought to replace it with a spanner without disassembling it, I love it so great and quick..
Nice technique great job 👍💯🏆
Thanks for sharing that
IF you have a newer model you still have to remove the body to get to the hub.
Thank you
Sir very nice vedio
Normal drill chuak convert to hemmer drill bit chuck
Excelente video bien bien claro muchas gracias. Pregunta. Este tipo de mandril aguanta trabajo pesado como hacer agujeros en metal primordialmente. Saludos y gracias. Desde Guatemala
That's fine and dandy, but what about taking the screw out before removing the chuck and replacing it after the new chuck is installed?
Super
Was there a reason why you did not insert the machine screw straight after mounting the chuck, especially as the chuck had already been tightened with the large hex key.
Best watched with sound OFF!
i need it so thanks man !
i have an old drill with 10inch manual chuck... ...can i change to 13mm keyless drill chuck?
Have a 20 volt craftsman with a keyless chuck. Either the "screw" takes a tiny tool, or I have no screw like this one. OBTW- Craftsman, help does not seem to have heard about this setup
Very qood
What is the size of the open wrench we are going to use?
Que llave uso
I said this on another video but I'll repeat it again for people who don't know> if your drill does not have a spindle lock don't even attempt to install a keyless chuck because you won't be able to reliably tighten it!
Instead a keyed chuck is designed for such drills.
Actually that chuck is designed to be used with any kind of drill. that chuck has two parts, one stationary to hold the chuck and the other one which is the moving part to open or close the claws. The chucks that ONLY has the moving part to open and close, those are chucks for spindle lock drills.
@@vaguincolombia doean't matter because you still can't grip the back part of the chuck properly so my argument atill stands.
(For any serious work that is)
@@AutodidactEngineerWell i have one and yes you can grip the back part. nowadays drill bits comes with 1/4 In. Hex Shank Drills so you dont need a gorila grip to secure the bit.
What size wrenches did you use?
Does anybody know how to pull apart a Skil chuck? My drill is the 6555A, 13mm model, and doesn't have a central screw inside the chuck. That's why I don't know how to even start the disassembling. Thank you in advance.
If you do not have a central screw, immediately disassemble it in the first way, drill the green one
Is that applicable for impact drills? Does the chuck won't loose while drilling? It's keyless without holding bolt.
Jaws of my keyless $40 Ryobi corded drill were frozen. Victim of heat or fine dust, not sure which. No way to hold a bar to remove the chuck. No obvious screw. Took off case, think the chuck is designed to be difficult to service. Returned it barely within its return period, got my money back.
That's my Ryobi P252,no screw just a 1/4" bit holder inside the chuck.
My problem here is my wrench is to thick
No need wrench to remove chuck. Just hammer the Allen key
Grind a bolt down to 3 sides. Insert bolt, put socket on bolt, impact drive it out. MUCH easier, and you can use the bolt for any drill
Fail. "all types of drill" do not have flats for using an open end wrench to secure the arbor, the Makita I have in my hand, nor none of the three old Craftsman's I have.
Spanner size ?
adjusted to the type of drill machine but use a thin spanner
Whats the name of this song though
Can you please give me this 10 mm Chuck please
You can get it on Amazon for 120-250 rupee. Just make sure to get the correct thread ( 20UNF or 24UNF) & correct shank (straight or SDS).
Size of wrench please
No need wrench to remove the chuck. Just hammer it the allen key
12mm i think..
I Don't !See any real Gain in Replacingt a Thirteen with a Ten ! Cap ! Any Better !
😂
Why the annoying music?