@@nhabenuocchaychiahai9640Это не для скучающих пенсионеров ,а для бедных. Голь на выдумки нужна. Я пенсионер, но такой херней в жизни не буду заниматься.
"Perfect for polishing wood", he said. I think he meant to say, "Perfect for ruining whatever you happen to be working on." Please "Fix it fast", FIX IT FAST and stop putting crap all over the internet!
You can buy this tool and sandpaper drums, threaded rod would save cutting off bolt head, grinder could screw directly into adapter, mounting filter to grinder first and useing it spinning to sand off paint would save labor. Wire brush, special adapter, and double stick tape would cost more than proper tool, tape wouldn't hold up very long. All in all, I give this a D-, or F.
Yes, let me take an afternoon, clean up a slimy oil can, sand it, fabricate a special bolt and fashion a drum sander I can probably buy at Harbor Freight or Home Depot for cheap. A waste of five minutes of my life. What's the purpose of these videos? to demonstrate people's mechanical skills?
The purpose of this video is to weed out all the whinny witches before the future gets here....a future where there are no more whinny witches....for some strange reason.
I just learned that you can spend more money, more time and get a lesser sander than what just cost a couple buck to get the real drum sander. I make videos to help people like this guy.
Because even if it's worthless, yt can make money out of the ads, and they used to drip a tiny bit of it to the uploader. Only if the vid fits their agenda.
@@FixItFast1 : No. It's not at all worth the time or monetary investment to do so. It is much easier and smarter to use the correct & readily available tools & expendable products for the needed task.
When I cut a hole in wood I always save the cutout piece for later use, like glueing sandpaper on it, or for spacers. Doesn't cost me anything and gives me several different sizes without any extra work. Take that, you "Fix It Fast"!
Ladies and gentlemen, after having watched this content creators skills and technique with power tools, I can confidently predict that here we have a budding contender for a Darwin award. It's really just a matter of time.
He keeps presenting the components like he is some sort of magician, and yet, there is never any magic or even a punchline. I guess the magic is not getting injured when that filter comes flying off at 3600 rpm. And you do know, right, that the bottom arbor of that grinder comes off, too, right? Ima need my five minutes back.
Normally I complain about loud music. In this case I think the music needs to be louder to completely drown out the dialog. Dumb idea but you get what you wish: a click and a comment.
After moving everything around like a magician to show the top, sides, front and back, I was expecting a rabbit would've been pulled out of the final product.
Hai solo suscitato curiosita'. So benissimo che che ci sono soluzioni più semplici. Ma volevo vedere come in uno sketch di Toto' dove volevi arrivare😂😂😂 S'informi!!!haaaaha
It doesn't matter how many times I hear it, the term "hack" to me still means someone with no discernible skills doing something that they are not capable of doing properly.
@@ronsamborski6230 : Actually, it's not even simple. It's a lot of time, money, and effort wasted just to make an inferior tool. A tool to be used in lieu of other tools that are much better that are already readily available.
@@FixItFast1 - one look at your gloveless hand next to the cutting wheel tells me how else it might work, too, if it skids off the workpiece and sends you to the ER, faster than you can say "Richard Cranium". Lots of useless, inane and galactically stupid stuff "works" if your on a desert island and have no alternative but I'm guessing you're not in that category. However, you persist in attempting to be your own best candidate for the Darwin Awards. I can use a perfectly good microwave oven as a fishing weight but that doesn't mean it makes sense or is worth doing.
Huh? No PPE, cutting sandpaper with scissors to dull them. What was the purpose of removing the paint from the filter? Where’d the special bolt come from? I have a sanding disc and wire brushes for my angle grinder.
Because it makes the video even longer. Therefore more ads can show up, so more money for the emperor! Yeaah! Tbh: I'd ban such contents from the entire internet.
I have been building sanding barrels for over 50 years. I've been a lathe operator, tool and diemaker, cabinetmaker,....and You, Kid, are NUTS.That has got to be one of the biggest waste of time "projects" i've ever seen.
👍👍👍 if you’re gonna talk while you’re making all the noise make your voice louder or lower the noise of the sanding because nobody can hear you when you’re talking when you’re making all the noise with the sanding.
Here’s a thought. Give a preview of what the finished project accomplishes. That way I will know if I should spend time watching it. Now, I first look at the last part of the video to make that decision
I love watching people who think they are smart handymen, who come up with dumb ideas on how to waste their day and effort to make something that cost them so much, knowing that they can buy a tool that works much better, much safer, cheaper, does not need to modify a tool they already have, and lasts a thousand times longer than what they are making. 🤷♂🤷♂🤦♂🤦♂
Would be way cooler with it filled with old grimy oil when you spin that old filter!!...drill couple small holes on the side right before going full send with it!!!...No safety glasses and a big smile will cause more likes for you!!!
You can buy better sanding drums--of all sizes--almost anywhere. Just because you CAN do something doesn't mean you SHOULD do it. Besides, that hump where your sandpaper overrides is going to leave marks in your work--every revolution.
Sorry you have to endure all the hateful comments. Even if the project was not very useful ( But it is ) the mean commenters should change their attitudes and give constructive criticism instead of pure mean belittling. But, they won't. They are ugly at heart. Heck, they are going to attack me and my comment. Anyway, good job Fix It Fast.
It's a good job alright (for anyone who has shares in the Elastoplast Company) I agree with you that constructive criticism is always the best way to respond, but what he's doing is demonstrating every dangerous engineering practice that it's possible to do with a disc grinder, (which is seriously irresponsible) All criticism is harsh, but hopefully he will learn something from it.
I’m retired have nothing to do at all through the day but watch these dumb things. And I still wouldn’t waste my time on this one.
Same here!! what a complete waste of time!
Đó là một therapy cho những người về hưu nhàm chán không có gì để hoạt động chân tay 😂
REALLY !!!
@@nhabenuocchaychiahai9640Это не для скучающих пенсионеров ,а для бедных. Голь на выдумки нужна. Я пенсионер, но такой херней в жизни не буду заниматься.
same
With this same method, I filled the oil filter with holes and made a cheese grater.
The only problem is that the cheese flies all over the room....
😁😁😅👍
lol!!
Now, just invent something to recover the cheese- ( whatever you do, don't CUT THE CHEESE )
Grated cheese probably tastes like used motor oil, too. Actually, the grated cheese would wind up packed into the oil filter, umm.
Ah,ha,ha! How about callous removal.
Впервые оставляю такой коммент:
На хера я это смотрел!?👎🏻
Отрицательный результат тоже результат! ☝️😂
Чтобы узнать, как проще всего сжечь УШМ!))
I watched it also and I have no idea why.
Не ты один😅
Достали уже эти попрошайки и побирушки, идиотам надарили телефонов, теперь недоблохерами все дружно стали, клянчат деньги за просмотры.
"Perfect for polishing wood", he said. I think he meant to say, "Perfect for ruining whatever you happen to be working on."
Please "Fix it fast", FIX IT FAST and stop putting crap all over the internet!
No $hit!
Столько бесполезного движения, когда можно это сделать из деревянной заготовки и меньше затрат на производство.
You can buy this tool and sandpaper drums, threaded rod would save cutting off bolt head, grinder could screw directly into adapter, mounting filter to grinder first and useing it spinning to sand off paint would save labor. Wire brush, special adapter, and double stick tape would cost more than proper tool, tape wouldn't hold up very long. All in all, I give this a D-, or F.
@seekerstan : Oh, I'll do ya one better. Grade this guy's idea an F - . 😂
Если фильтр от грузовика поставить на большую болгарку эффективность увеличится в пять раз😂😂😂
Yes, let me take an afternoon, clean up a slimy oil can, sand it, fabricate a special bolt and fashion a drum sander I can probably buy at Harbor Freight or Home Depot for cheap. A waste of five minutes of my life. What's the purpose of these videos? to demonstrate people's mechanical skills?
AMEN MY BROTHER, WHAT A WASTE OF VIDEO TIME. I WENT STRAIGHT TO PORN SITES TO REGAIN MY SANITY !!
Maybe he doesn’t have a car?
The purpose of this video is to weed out all the whinny witches before the future gets here....a future where there are no more whinny witches....for some strange reason.
Käse 😅😂
Hilfe 😅😅😅😅😅😅😅😅😅😅
We are all now dumber after watching this video.
..not me, I was wearing B/S Detect&Reject goggles..!!
..so at least you can now validate Donald Trump 'the rapist' clown as POTUS 🤡👍
I'll say
I want my 5 minutes back.
@@rafaellastracom6411 me too 😂😂
I just learned that you can spend more money, more time and get a lesser sander than what just cost a couple buck to get the real drum sander. I make videos to help people like this guy.
Just one question - Why???
It has to be a troll, a click troll!
Pretty obvious why it isn't patented
Well that's 5:44 wasted I can never get back. Actually less because I skipped ahead, but still...
Why waste all that time when there's multiple products already on the market that performs better???😢😢😢
Because even if it's worthless, yt can make money out of the ads, and they used to drip a tiny bit of it to the uploader. Only if the vid fits their agenda.
@@baladar1353 exactly, he and YT make money on the wasted time of the millions of viewers
I usually just buy a flapper disc and put it on my grinder, they work awesome
Well, isn't this option interesting? Wouldn't you like to make one?
@@FixItFast1 ..ma va a kagare..!
@@FixItFast1 : No. It's not at all worth the time or monetary investment to do so.
It is much easier and smarter to use the correct & readily available tools & expendable products for the needed task.
@@turbodiesel4709 And Safer!
When I cut a hole in wood I always save the cutout piece for later use, like glueing sandpaper on it, or for spacers. Doesn't cost me anything and gives me several different sizes without any extra work.
Take that, you "Fix It Fast"!
This video is so informative and helpful, thank you for sharing it
I actually thought that person was sent to a psychiatric hospital. But I see that he is active again.
I wonder if they gave up treating him? 🤣
From looking at this clip, it would seem that he is already beyond any hope of improvement!
Or you could just buy an Orbital Sander or a Drum Sander that will do a much better job for a few bucks.
He is so proud of his design. Dunning and Kruger are sitting back and thinking. Yup. A prime example.
Ladies and gentlemen, after having watched this content creators skills and technique with power tools, I can confidently predict that here we have a budding contender for a Darwin award. It's really just a matter of time.
Nice! An inexpensive, easy DIY hand and face deleter.
And it will probably ruin whatever you're sanding as well.
Super, extraordinaire, génial, même Léonard de Vinci n'y avait pas pensé !!!
Ouais mais tu vois pas la progression toi, au début il avait essayé avec un filtre en carton 🤣🤣🤣 !!!
What a waste of time
@@dennisisrael640 yes a waste of viewing time
I should have gone with my gut feeling and just blocked this channel without watching the video.
You can do it every time, but I'm wondering why youtube won't delete such channels. Actually I think I know that.
Complete waste of time when one can simply use a off-the-shelf drum sander.
I have a belt sander thank you
A belt sander is great. This "contraption" would make round grooves in everything! 🤦
And next week I am going to take a scooter engine, add some straps and a water tank and turn it into a garden sprayer - brilliant!
He keeps presenting the components like he is some sort of magician, and yet, there is never any magic or even a punchline. I guess the magic is not getting injured when that filter comes flying off at 3600 rpm.
And you do know, right, that the bottom arbor of that grinder comes off, too, right? Ima need my five minutes back.
Normally I complain about loud music. In this case I think the music needs to be louder to completely drown out the dialog.
Dumb idea but you get what you wish: a click and a comment.
Sandpapier mit der Schere schneiden ? ganz schlechte Idee ,für die Schere
I Retire my used oil filter by throwing it in my neighbors garbage can
No sé cómo pudieron llegar a la Luna,sin semejante artilugio 😢😢😂😂😂😂
I did the same thing by using a large hole saw, I needed to sand the inside radius of a part for a large UAV that I was building!
Instead of mounting it on your angle grinder plug it in the back of your telly and get every channel in the world absolutely free
@videos995 : 😂😂😂😂😂
What's the RPM rating of that oil filter? What brands work best?
Some people have too much time on their hand. You are fired !!!
Another TH-cam example of "a goofy solution to a non-existent problem."
It's brilliant! Why such emotions?
😂 I want my 5 minutes and 44 seconds back!
Its like watching a Temu Macgyver 😂
🤣🤣😂😂🤣🤣😂😂🤣🤣как он ловко нас всех развёл на 6 минут жизни !!!
Im taking this onto 'Dragons Den" Deborah and Peter will fight over this!!!!
Your next video will be "How to turn a coffee machine into a toothbrush".
After moving everything around like a magician to show the top, sides, front and back, I was expecting a rabbit would've been pulled out of the final product.
Hai solo suscitato curiosita'. So benissimo che che ci sono soluzioni più semplici. Ma volevo vedere come in uno sketch di Toto' dove volevi arrivare😂😂😂
S'informi!!!haaaaha
It doesn't matter how many times I hear it, the term "hack" to me still means someone with no discernible skills doing something that they are not capable of doing properly.
There goes 5 minutes I'll never get back.
Whenever a video starts with "Why isn't this patented?", I've typically found it a waste of time & energy
To je opravdu neuvěřitelný nápad, taková hovadina by hned tak někoho nenapadla.
The thread on a lot of oil filters is the same as the headstock of my wood turning lathe . So I have a large supply of free faceplates.
My engine is going to like the extra sand in the oil!
This made my arse leak
Sit on a champagne bottle
If it your arse leak, your not using the tool correctly 🙄 😉 🤣
glad I scrolled to the end
didn't like it? it's brilliant and simple!
@@FixItFast1
Simple, yes. Brilliant, no.
@@ronsamborski6230 : Actually, it's not even simple. It's a lot of time, money, and effort wasted just to make an inferior tool.
A tool to be used in lieu of other tools that are much better that are already readily available.
@@turbodiesel4709
I meant simple in that it’s not an overly complex device like a nuclear reactor. That’s all. 👍🏼
very helpful
👍
It’s not patented because some people have more brains than to take this sort of tripe seriously. .
Well, it works! You understand that it's your choice to repeat it or not, but the fact is that it works!
@@FixItFast1 - one look at your gloveless hand next to the cutting wheel tells me how else it might work, too, if it skids off the workpiece and sends you to the ER, faster than you can say "Richard Cranium".
Lots of useless, inane and galactically stupid stuff "works" if your on a desert island and have no alternative but I'm guessing you're not in that category. However, you persist in attempting to be your own best candidate for the Darwin Awards. I can use a perfectly good microwave oven as a fishing weight but that doesn't mean it makes sense or is worth doing.
Huh? No PPE, cutting sandpaper with scissors to dull them. What was the purpose of removing the paint from the filter? Where’d the special bolt come from? I have a sanding disc and wire brushes for my angle grinder.
You cannot make a connecting bolt screw without a lathe. Since few citizens have access to the lathe, this use and procedure is irrelevant.
Yes, why sand off the paint? It’s not a problem, but taking it off is!!
Because it makes the video even longer. Therefore more ads can show up, so more money for the emperor! Yeaah!
Tbh: I'd ban such contents from the entire internet.
I did this with a pineapple so I could have a snack when I was done sanding
Sump Oil & Pineapple sounds like catchy new flavour?
Just because you can spin an elephant at 3000 rpm doesn't mean it's a good idea. ✌
How to launch an oil filter across your workshop using an angle grinder a a propellant.
I'm glad I skipped towards the end, so I didn't end up wasting my time.
Yeah. Why isn't this patented? You should do that and get back to us on how that goes.
I have been building sanding barrels for over 50 years. I've been a lathe operator, tool and diemaker, cabinetmaker,....and You, Kid, are NUTS.That has got to be one of the biggest waste of time "projects" i've ever seen.
👍👍👍 if you’re gonna talk while you’re making all the noise make your voice louder or lower the noise of the sanding because nobody can hear you when you’re talking when you’re making all the noise with the sanding.
Here’s a thought.
Give a preview of what the finished project accomplishes. That way I will know if I should spend time watching it. Now, I first look at the last part of the video to make that decision
I love watching people who think they are smart handymen, who come up with dumb ideas on how to waste their day and effort to make something that cost them so much, knowing that they can buy a tool that works much better, much safer, cheaper, does not need to modify a tool they already have, and lasts a thousand times longer than what they are making. 🤷♂🤷♂🤦♂🤦♂
Whiner alert!
208K views. Cash register goes "Kaaaah ching!".
Os comentários criticando esse trabalho, estão certissimos ! Fazer de madeira é 1000 vezes mais fácil e funciona melhor ! 😂😂😂😂
Now I know what I can do with my old oil filters.Throw them away.
oh... I think I know why this isn't patented
Nice video, but I'll buy an already made much better drum sander at my local hardware store for under $15.
Or... Hear me out... We could've grabbed the sander that was next to the grinder.
In addition to the comments, all of which are correct, he used a cutting disc as a grinder, foolish and dangerous.
Sadly there are no videos showing such "masters" when the cutting disc shatters during drinding with them.
Well that was 5 minutes of my life I’ll never get back.
WHAT I DID INSTEAD WAS BUY A SANDING DRUM.
But my method works brilliantly
Would be way cooler with it filled with old grimy oil when you spin that old filter!!...drill couple small holes on the side right before going full send with it!!!...No safety glasses and a big smile will cause more likes for you!!!
man that reeks of effort
This video is for people who don’t have a life.
WOW thats just what I need to sand the dent out of my new Porsche !!!
A Dent Won't "Sand Out", .. Porsche ......
@@kerriknight After I fill it with cement LOL !!
I agree!!!!! The TITLE of the video is CLICKBAIT!!!! He spent MORE time, money and materials fo a random size drum sander!!!😂😂😂
You got me good just used up 6 minutes of quality life time
Technologický postup zkracování šroubů je velmi svérázný, je vidět že se pán doma nudí a vymýšlí nesmysly
The bearings are rattling quite a bit. This heavy load only makes the problem worse.
Я увидел все инструменты новые, болгарка тисы, ножницы и прочее.
Вопрос: при таком раскладе зачем такой бомжрасходник?
You can buy better sanding drums--of all sizes--almost anywhere. Just because you CAN do something doesn't mean you SHOULD do it. Besides, that hump where your sandpaper overrides is going to leave marks in your work--every revolution.
There's 5 minutes of my life I'm not getting back...
The 44 seconds were precious too
I have an oil filter from a Scania. Will that work?
Where do you get the adapter that screws into the oil filter ? The crux part was glossed over.
Wow, I'm pretty sure they have things just like that at Home Depot .
Não considerei ruim , não.
É uma ideia válida.
Yeah, weaving baskets underwater also is!
@@baladar1353 Whiney baby.
SUPER IDEA . POZDRAWIAM .
This idea has been pattented. It's called a sanding drum. It fits on a a dill.
😂🤝 I love people with humor! I always answer them like that 🤗
I take my old oil filters to Wal mart to be recycled .
Sorry you have to endure all the hateful comments. Even if the project was not very useful ( But it is ) the mean commenters should change their attitudes and give constructive criticism instead of pure mean belittling. But, they won't. They are ugly at heart. Heck, they are going to attack me and my comment. Anyway, good job Fix It Fast.
It's a good job alright (for anyone who has shares in the Elastoplast Company)
I agree with you that constructive criticism is always the best way to respond, but what he's doing is demonstrating every dangerous engineering practice that it's possible to do with a disc grinder, (which is seriously irresponsible)
All criticism is harsh, but hopefully he will learn something from it.
В России есть такая поговорка - "когда коту нечего делать, он лижет яйца!" Здесь тоже самое!!! 😂
hi, i'm sandy
Всегда муть одна в этих иностранных видосах 😢😂 просто пипец
Почему иностранный? Это наши небось дрочью маятся. Главное назвать по иностранному.
I can understand why he doesn't show his face and leaves the voice to a computer. You must have such an empty head in your family.🙈🙈🙈
wow, thats handy
Why you cant do the same thing whitout take off the paint from the filter?😅
Так и думал, что металлической щёткой он себе руку поранит
It would've been much better to watch, I tell you.
Time is Money and that was just a waste of both😂😂😂
Whiner alert!