Autoglym Polar Blaster - Set up, Use and Maintain
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- Looking to achieve the best results with the Autoglym Polar Blaster?
Watch the video to see how to set up, use & maintain your Polar Blaster, for long-lasting performance and results.
Learn more - www.autoglym.com.au/polar-bla...
Reach out to us via -
Instagram: /
Facebook: / autoglymaustralia
Website: www.autoglym.com.au/ - ยานยนต์และพาหนะ
Excellent demo .
just brought the combo works really great highly recommend
lol btw next time you might want to use a black car instead shows off your product even better
hello what size orifice is in this foam cannon?
Just wondering in the video when you pouring the mixed liquid to the lawn, will it damage the lawn?
Is an adapter necessary? The black one given does not fit my washer. It fits without it tho with the grey nozzle perfectly is that okay?
what size orifice is in this foam cannon from factory?
Is there a Ryobi attachment anywhere?
I think the plastic reservoir bottle should have a legible level marker for each product ratio that you can read. Getting the right product ratio is paramount
Yes, we looked into that, though we found that in a lot of case, people wouldn't always need to fill the whole bottle. We suggest having a measuring cup to the side, though it's also worth considering that the ratios can be changed up, or down, depending on the product being used. For eg Polar Wash should never be more than 50:50 though can be less, and Polar Seal isn't any more effective at a higher ratio than 40ml to 200ml of water.
Yes I do get that and thank you for replying
Paramount???? 😂😂😂😂 I think bringing spare ammo to a gunfight, looking before you cross a busy road or even bringing additional water on an outback adventure would be described as being paramount. I going to go out on a limb here and say that foam ratios are not even in the paramount ballpark!
need some markings on that sucker . for fluid measurements, should be more than enough real-estate on that bottle
Mine came with the karcher adaptor on the connector and i needed to use the gerni adaptor. Karcher will not come loose off the connector, tried using grips and still won’t budge
They're pre-installed with this adaptor and are firmly tightened. You should be able to remove it though sometimes it does take more effort than most. You could try using anti-sieze and if you're not going to use the Karcher adaptor, probably no need to be afraid of stripping it.
Have y’all got any attachments that would fit my Ryobi RPW140sc pressure washer ??
Hi there, we aren't able to offer the adaptors other than what's included in the box, at this time. Best bet is to grab one at a Bunnings or similar retailer. Some Ryobi pressure washers, can actually use the Gerni attachment, so may be worth checking that. Cheers.
i never made nice foam.
i don’t know how much water and form water need to put😅
Do you get both adaptors in the box im swapping from Karcher to Nilfisk
You get an adaptor for Gerni in the box.
Just wondering is a 1885psi pressure enough to use this foam cannon ?, looking at the gerni 5300.
That'll work just fine!
@@AutoglymANZ Thanks for the info.
I wish I could get a trigger gun for my TITAN 2200 pressure washer. TTB2200PRW 😪
Suggest you contact the manufacturer or retailer where you bought it from, see what the adaptor looks like. Or take a trip to someone like Enzed or Bunnings who do keep a range of adaptors that may work!
I'm in the same situation as you. Did you manage to find a suitable adaptor?
Does the karcher adaptor come with this product?
Sure does.
What is the size of the male quick connect plug?
1/4 BSP
Do you have old bosch fittings or will an adapter off ebay work?
Fittings included are for Karcher K-series and Gerni domestic pressure washers. For all others, try Bunnings, Enzed or the manufacturer of the pressure washer.
Can I connect this straight to a 1/4 quick connect on a gun without any adaptors?
Not sure what you mean?
@@AutoglymANZ What's the silicone feeder tube size. Lost mine . Thanks
My box I got doesn’t come with a gerni adapter
Take it back to the store where you bought it or if online, contact them. They'll be able to arrange something.
Mine Leaks from the bayonet fitting on the karcher adapter
Did you solve the problem?
@@berkancakmak9220 yes it needed a new bayonette fitting
Is there a Ryobi adaptor for those of us who shop at Bunnings?
How’d u go mate ? U find any of these foam cannons that fit our ryobi washers ?
@@filiplaskovski9993 I ended up getting the Ryobi foam cannon from Bunnings. I think it was $20? Works fine. The opening is small though, I have to use a funnel to pour in the soap.
@@JFomo The Ryobi doesnt work very well. not like this one
fits any carcher?
All of the domestic variants yes.
Does it work with other soap than the autoglym ???
The Polar Series are specifically formulated for Polar Blaster. It's possible to use other foaming solutions, and as long as you make sure the Polar Blaster is kept clean, should have an issue, if that's the way you want to go.
Which one fits a ryobi
For Ryobi, you'll need to buy teh adaptor to suit, which isn't included in the kit. Bunnings, SCA, Repco, all stock them
Mine don’t foam that well to be honest
Make sure you're using the right ratio of product to water, and that the flow control is set properly and you'll see foam just like this!
How do I change the gauze?
That's not a serviceable part, unfortunately. You shouldn't have any issue if you keep the Polar Blaster clean after every use.
how do yu suggest cleaning it if this hasnt been the case?@@AutoglymANZ
would be great to see the product actually cleaning a dirty car !!!
It doesnt foam like that..in reality its runny
youre using it wrong then lad
Does this work with the Ozito 1800W 2030PSI High Pressure Washer, please?
Yes, that pressure is within the workable range. You will have to source an adaptor for it though.
@@AutoglymANZ where do I get this adapter