You need to reduce the spread of the MJJC cannon to produce thicker foam. As it was in your video, it WAS dry foam like it does so well, but it's not very thick. But that's because it looked like the spread (the dial you adjust at the front of the nozzle) was open all the way, which disperses the foam over a greater area, thereby having less foam in a concentrated area (plus more foam is lost to the ground or the sky as you can see in your video). If you reduce the spread to something more like what the Autoglym was set at, you'll get foam that's both incredibly thick AND relatively dry.
You should always pressure wash the car first to get rid of the loose dirt, giving the foam the highest chance safely start the contact wash 👍 but if you do the dilutions correctly and use a high quality cannon it should stay on the car nicely
Is the Auto Glym one better because it’s actually dragging some crap off the van while the MJJC just hangs around for ever? Not that the van was dirty but you know what I mean.
I have the autoglym canon and used with a Karcher K 4 and a stubby gun , it is too powerful the foam hits the car goes everywhere splats all the drive and fence , but more less with the karcher lance but still strong , any settings on karcher for this or tips , just seems to make a mess
I use loads of different makes of jugs for detailing, and while Pyrex may be the most durable they certainly haven't got a clue how to make a lip that doesn't drip. I'd rather use a paper cup than a Pyrex jug.
The Auto Glym now has markings on the bottle , bought one a few weeks ago.
Don’t wet first, the product just runs away giving less dwell time
You need to reduce the spread of the MJJC cannon to produce thicker foam. As it was in your video, it WAS dry foam like it does so well, but it's not very thick. But that's because it looked like the spread (the dial you adjust at the front of the nozzle) was open all the way, which disperses the foam over a greater area, thereby having less foam in a concentrated area (plus more foam is lost to the ground or the sky as you can see in your video). If you reduce the spread to something more like what the Autoglym was set at, you'll get foam that's both incredibly thick AND relatively dry.
thank you for the review, I appreciate it! Exactly what I wanted to find out with these two lances
Why would you wet it first? The foam is meant to stay on for 10 minutes and wetting it first just makes it run off.
You should always pressure wash the car first to get rid of the loose dirt, giving the foam the highest chance safely start the contact wash 👍 but if you do the dilutions correctly and use a high quality cannon it should stay on the car nicely
@@yoink5592 wise up, lad
@@mpchmr1317 sorry sir
I have the autoglym one and it has an adjustable nozzle for a wider spread
you might find it easier to use with the short pistol gun - i find the auto glymm bottle works best with the the quick connect
Could easily adjust the mix in either cannon to make the foam thicker or thinner depending on which one you want to win 😂
Good vid mate, hope you used the two bucket method to wash that van 🤣
On my own car of course I'd use 2.....but on the old mans van...not so much 🤣
Is the Auto Glym one better because it’s actually dragging some crap off the van while the MJJC just hangs around for ever? Not that the van was dirty but you know what I mean.
I would say the MJJC lance is the better one, personally 👌 however the Auto Glym one its still a great lance 👍
@@charlieschannel4192 well you’re the one that’s used them both not me so I’ll go with what you say 👍🏽👍🏽
Mjjc for the win
Don't think he had nozzles set the same. The Autoglym gives a much creamer spray when on wide spray and clings better.
I have the autoglym canon and used with a Karcher K 4 and a stubby gun , it is too powerful the foam hits the car goes everywhere splats all the drive and fence , but more less with the karcher lance but still strong , any settings on karcher for this or tips , just seems to make a mess
The k4 is pretty powerful, the only recommendation I can give is possibly standing further away from the car when snow foaming
@@charlieschannel4192 ok thanks for reply, I’ll probably have to use the karcher gun and use the stubby for rinsing ,
Did it come with a adaptor to fit the karcher or did you have to buy it separate
Yes it does come with the karcher adapter in the box, 👌
I’m going to buy it today lol
👌👌 have fun
"runner for the back door"
AGAIN! It's like porn!
Does foam thickness matter after a certain point? Or is that for instagram?
Abbit of both mate 👌 😅
Excellent which karcher did you use?
I used a karcher k4.
Hi.i need a make this liquide .plz
"I hope I don't spill it."
I hate those pyrex jugs honestly.
I use loads of different makes of jugs for detailing, and while Pyrex may be the most durable they certainly haven't got a clue how to make a lip that doesn't drip. I'd rather use a paper cup than a Pyrex jug.
COYS!
Yes mate! Had to represent!!
Hello, how are you? Thanks for the review. By the way, do you have instagram media?
No worries, unfortunately I do not.
@@charlieschannel4192 Sorry, I think i have forgotten your email address. Kelly
@@MJJCvideo Hi Kelly my email address is charlies-channel@hotmail.com
@@charlieschannel4192 Got it, thanks. I will email you later.