Thanks for the video, I had no idea how to install the adaptor and I couldn't work out how to install it - the instructions on autoglym wasn't too clear
Thanks this video was so useful, had been starting at the same brass coupling trying to figure out both were is was supposed to fit on the Autoglym and washers ends!🙂
@@TeamRobertson heated the brass section up and the whole of the brass length is just spinning round inside the plastic. I'll try freezing next once it's cooled down. One of the worst things I've bought
Looks like the wrong adapter you got there. Look for the Nilfisk Gerni adapter. They have the rounded tabs on the sides for the newer generation. That would explain you having trouble putting it in.
@@toxotis70 Here, type 3 (4th option) www.aliexpress.com/item/4000534007625.html?spm=a2g0s.9042311.0.0.27424c4dOXClqV but i'd suggest buying a gun with Nilfisk adapter instead www.aliexpress.com/item/1005002345865167.html?spm=a2g0s.9042311.0.0.27424c4d5EdtbB
@@RutgerMulder would this gun work with this autoglym foamer? Link keeps getting deleted, snubby trigger gun with nozzle kit from slims detailing is the item I'm asking about.
I'm pleased with it. Much easier to load than the standard Nilfisk item, and produces a much thicker foam which clings longer. I had bought an amazon special, but that fell over a lot, and eventually stopped working for some unknown reason.
Good video. We use those black gloves too. Hope you enjoy the Polar Blaster.
I had no idea how to work out how to change to the Nilfisk adpter until i saw your video so your video helped greatly THANKS
Very useful, just followed the instructions and it worked like a charm….thanks!
Cheers for the heads up! Glad to have seen this prior to starting to try and put it together
You’ve just saved me an hour of trying to work it out.
Many thanks.
Brilliant! It took me ages to get my head around it! Cheers mate
Great vid. !..I will now go out and one...as for getting it in and out...I push the gun to the floor to get the said pressure and twist..
Thank you so much! It was driving me mad trying to work out how to fit the adapter. So simple when you know how!
Thanks for the video, I had no idea how to install the adaptor and I couldn't work out how to install it - the instructions on autoglym wasn't too clear
Thanks this video was so useful, had been starting at the same brass coupling trying to figure out both were is was supposed to fit on the Autoglym and washers ends!🙂
Great Vlog Sir, Image was super clear, Sound Was Perfect
Just the video i was looking for ... Many Thanks
That's way better than on the Autoglym website
great video. very helpful
Thanks man I need to see that video to make my decision
I think mine is defective. It just won't budge. I've even tried using a clamp and penetrating oil to open it up but it's locked solid
As its brass, I'd try gently heating it in a vice. That may help it budge.
@@TeamRobertson won't it melt the plastic?
Heat the brass section at the bottom, not thr plastic, or put it in the freezer overnight just to play with the difference in materials.
@@TeamRobertson heated the brass section up and the whole of the brass length is just spinning round inside the plastic. I'll try freezing next once it's cooled down.
One of the worst things I've bought
@@LeedsHypnotherapist any luck pal? Mine isn't shifting at all either. So frustrating
You're a total lifesaver
Looks like the wrong adapter you got there. Look for the Nilfisk Gerni adapter. They have the rounded tabs on the sides for the newer generation. That would explain you having trouble putting it in.
do you have any link for this? I have the same problem.
@@toxotis70 Here, type 3 (4th option)
www.aliexpress.com/item/4000534007625.html?spm=a2g0s.9042311.0.0.27424c4dOXClqV
but i'd suggest buying a gun with Nilfisk adapter instead
www.aliexpress.com/item/1005002345865167.html?spm=a2g0s.9042311.0.0.27424c4d5EdtbB
@@RutgerMulder would this gun work with this autoglym foamer? Link keeps getting deleted, snubby trigger gun with nozzle kit from slims detailing is the item I'm asking about.
What about showing how the foam gun performs buddy
Good effort,where did you get the 20mm adapter from ,that fits to the gun?
Amazon. Loads to choose from.
www.amazon.co.uk/dp/B08VWTSS91?ref=ppx_pop_mob_ap_share
Very good useful thanks
Useful.
How good is the blaster? Thinking about buying one
I'm pleased with it. Much easier to load than the standard Nilfisk item, and produces a much thicker foam which clings longer. I had bought an amazon special, but that fell over a lot, and eventually stopped working for some unknown reason.
Your everyone’s hero now lol
Thank you!! Just spent half hour scratching my head
Hey does it matter what Nilfisk power washer you have?
I think all the nilfisk sprayers have the same male / female connectors, but the Autoglym site is specific which fit.
Where did you get that adapter please , just what I'm after
From autoglym website
@@TeamRobertson thank you
Hi.
What if u have a Lance with threaded end how do u put polar blaster on
Sorry, no idea. Maybe autoglym can offer you a different adapter?
Which nilfisk pressure washer do you have?
C115 (10 years old I guess )
i have this adapter also.... very annoying i have to have the right key with me every time!
I bought some nozzles from Amazon which has made the removal un nessacery. It was worth the £6 or so.
@@TeamRobertson link please...
No PTFE on your thread’s man