Civil Engineering Common Interview Questions | Job Interview Q & A for Civil Engineers

#civilguruji #civilengineers #Interview #Jobs
Civil Engineering Common Interview Questions | Job Interview Q & A for Civil Engineers
Enroll and get started :- tinyurl.com/CO...
Get 75% Discount Use Coupon Code :- GURUJI
Download Interview Question Bank :- tinyurl.com/Qu...
For Training Call Now : 9111001234
Interview question part-2 : • Civil Engineering Basi...
1. Calculation of Brick Work : • Brick Quantity calcula...
2. Admixture : • Types Of Admixtures Us...
3. Water Cement Ratio : • How much Water is used...
4. Honeycomb : • How much Water is used...
5. Formwork : • Checklist For Shutteri...
6. Different Grades of OPC cement & Their Usages | 33, 43 & 53 Grades : • Different Grades of OP...
ABOUT THIS VIDEO :-
In this video Er. Chetan Sharma & Corporate Trainer of Civil Guruji (Civil Engineers Training Institute) is Explaining about Civil Engineering Common Interview Questions | Job Interview Q & A for Civil Engineers
Here’s a list of 10 must-know civil engineering interview questions and answers to ensure your next interview is a success.
As the construction industry worldwide is growing very high, the demand for Civil Engineers and Construction Managers is also growing at the same speed.
To build a career as a Civil Engineer, candidates need to crack the interview in which they are asked for various Civil Engineering interview questions.
We have compiled a list of Common Interview Questions asked Civil Engineering interview questions and answers that an interviewer might ask you during your Civil Engineer job interview. Engineers are likely to be asked basic to advance level Civil Engineering interview questions depending on their experience and various other factors.
Civil Engineering Common Interview Questions | Job Interview Q & A for Civil Engineers
Top 10 Civil Engineering Common Interview Questions | Job Interview Q & A for Civil Engineers
Q1. What is the standard and nominal size of Bricks in India?
In India, standard brick size is 190 mm x 90 mm x 90 mm as per the recommendation of BIS. With mortar thickness, the dimension of the brick becomes 200 mm x 100 mm x 100 mm which is also known as the nominal size of the modular brick.
Q2. What are admixtures in Concrete?
Chemical admixtures are the ingredients in concrete other than Portland cement, water, and aggregates that are added to the mix immediately before or during mixing. Producers use admixtures primarily to reduce the cost of concrete construction; to modify the properties of hardened concrete; to ensure the quality of concrete during mixing, transporting, placing, and curing; and to overcome certain emergencies during concrete operations.
Q3. What is/are the standard IS Code(s) used for ?
Indian Standard Codes (IS Codes) for Reinforcements
Reinforcement and reinforced concrete - Code of Practice IS 456 2000
Specification for mild steel and medium tensile steel bars and hard- drawn steel wire for concrete reinforcement: IS 432 1982 Part 2
High strength deformed steel bars and wires for concrete reinforcement - Specification IS 1786 2008
Code of Practice for Bending and Fixing of Bars for Concrete Reinforcement IS 2502 1963
Recommendations for Detailing of Reinforcement in Reinforced Concrete Works IS 5525 1969
Q4. How Water - cement ratio is associated with strength of concrete?
The water-cement ratio is one of the most important aspect when it comes to maintaining the strength of Concrete. The ratio depends on the grade of concrete and the structure size. We generally prefer a W/C ratio of 0.4 to 0.6, but it can be decreased in case of high grade concrete, we reduce the amount of water and use plasticizers instead.
W/C ratio affects the workability of concrete and thus should be taken into careful consideration. Also, if the ratio exceeds the normal value, segregation of concrete occurs and the coarse aggregate settles at the bottom, thus affecting the strength of concrete greatly.
Q5. Define bleeding, segregation and honeycombing.
. Bleeding - when cement and water come on the top and aggregate is settle down is called bleeding this is due to specific gravity of material and improper placing.
Segregation - it means separation of ingredients of concrete
Honey combing - after removal of formwork from column beam there is hole Is called honeycombing. It occurs due to improper compaction of
concrete
Q6. What are the minimum propping period of beams and slabs of various spans?
Q7. What is plinth level and sill level?
Q 8. What is the meaning of Fe415?
Q 9. What are the ratios of Cement Sand and Aggregate for different concrete mixes?
Q 10. Define buckling of a structural element.