How to clean Mass Air flow sensor
ฝัง
- เผยแพร่เมื่อ 6 เม.ย. 2023
- Did you know that, IF you clean this, Engine will burn less fuel, because when the mass air flow sensor miss calculate the amount air entering the intake send more fuel to compensate for the lack of oxygen
- ยานยนต์และพาหนะ
Throttle body & MAF sensors cleaning feels like driving a new car.
🧐🧐
always give me the same feel
It's called the placebo effect
cleaned my oil filled tb got rid of my missfire code too
@@aidenwilson6805wait what is it?
I try and clean my maf and throttle body every 30k miles. Takes about 15 minutes to do both .
That's great job
Great video once again Sir.
Glad you enjoyed it
Thanks for the video. Very helpful!
You're welcome!
exactly the video I was looking for thank you, Pal!.💦
There's a cleaner for everything these days.
its all the same shit
Okay I will try that on my 2000. Chevy truck
You can use throttle body spray , 25yrs no problem 🥴
Great video Ali!
Is it okay to use electronics contact cleaner?
No, bc it will leave a layer for better electric contact , but we don't want that on the sensor, if you use mass airflow sensor, it won't leave any residue on the sensor, so it will give u accurate reading
@@AliMECH wow! You are genius man! Thank you for your reply and keep it up
@@imadkhoder709 glad to help 🙏
Glad I read this @@AliMECH
Glad to help@@CinHalCedHerChance
💪🏾💪🏾💪🏾🔥🔥🔥
🙏🙏
مذهل انت ❤
شكرا
You probably would have to buy this can. Any other solvent can ruin the unforgiving exhaust sensors.
You can buy any brand maf cleaner it just needs to say its for the airflow sensor
Do I need to disconnect the battery?
No, if the ignition key is off
@@AliMECHthanks❤
My car have no power,but when I disconnect MAF sensor power is back. Is that telling me I have bad MAF ?
What do you mean by no power?
My Honda civic 2016 after replace battery car start then shut off . I checked code there intake air sensor
when the battery is replaced, it is necessary to connect the scanner and reset the errors.
Change the intake filter
Will this cure my mac & cheese crust 😮
Just did mine for the 3rd time. Do it every 100,000km
Have 452,312 kilometers and yes l'm a Canuk. Toyota Highlander btw
My dealer Clean T-body and MAf service 253$ for Corolla 😵💫
Where we can find crc products
most of the times in ACE stores
Will this help with acceleration hesitation and rough idle?
Most probably yes. Must try that. Highly recommended.
Cleaning a dirty throttle body or MAF sensor will definitely improve idle and acceleration.
Would this help my 09 kia Optima it will not stay running it shuts off after 10 to 15 seconds cant drive it out of the driveway
Run the codes , check engine light on ?
❤شكرا لك
🙏
You JUST squirt them? No rags/pipe cleaners/etc?
Nope! Too sensitive. You could mess up the readings or break the wire.
Use scotchbrite scrubber and dishwashing detergent. Give it a HARD SCRUB.
NO DONT DO THAT 😂
do you think this could help with reduced engine/stabilitrak message?
Wondering the same
If you are getting this , it's most likely a throttle body issue or coil pack for stabilitrak
@@LetsMakeItHappen23 we replaced throttle body, MAF, MAP. Now it finally just doesn’t even stay on. We’re gonna have to have it towed to Hopefully get fixed if it’s not too much $$$ I’ll have to mention the coil pack. I was also thinking we may need new spark plugs too but I’m not confident in changing these so hopefully not too expensive to have done and this works. Thanks for the reply
@@Jentt then the coil packs and spark plugs would really be the problem , when is the last time you've replaced spark plugs and coils ? And no problem
@@LetsMakeItHappen23 we never have had them replaced since we’ve had the car. We bought this used and have had it about 3 yrs. Not sure if/when previous owner ever did. so this is probably the issue. Hopefully this is it and isn’t too expensive to have done. Didn’t want to to shopping for a car atm ugh. Thank You soooooo much for helping me 🤗
My machinic charged me $180 bucks for this it took him 20 minutes ,😢
I would literally sue him for ripping you off
Just for cleaning? Even if its replacing, it's not that hard
اي عطل يحصل لسيارتك او شي ترغب بتغييره او اي جزء عطلان قبل تذهب به الى الفني ادخل اليوتيوب وابحث سوف تحصل على حلول او اقل شي سوف ترا طريقة التغيير انها سهله وغير وكلفه وتتفادى النصب والاحتيال عليك الجهل في بعض الامور الحياتية واليومية ضار بك وبجيبك
That’s why you TH-cam and Google 1st !
Bad mechanic
No need to disconnect the battery?
No need
Yes lol you do. Safer that way
I clean mines,I have a Toyota Avalon and that gas needle didn’t move.
Would electric cleaner work?
No, its designed to add up for better contact
اللهم صل وسلم على نبينا محمد.
What happens if you clean it and it runs good for a day then the next day it feels weird again
Better off getting a new one , they tend to go back after 70-100k miles depends on how long it's been in the engine , but if you take it out and clean every 30k miles (when you swap out air filter) then it can prolong the life out the MAF
No ony clean with mass air flow sensor cleaner and get the biggest can u find
OMG. I am doomed. I only waited 29 mins.
Right to jail. Right away.
I drove right away ha ha (went from 10 to 1 code on my scanner)
Does anyone know if it’s okay to dry with a compressed air can afterward?
I wouldn't! Some of the sensors are held by a super thin wires.
Where is the difference between break cleaner and Mass Air Flow cleaner?
Brake cleaner is far too harsh for the sensor in a MAF. MAF cleaner is much gentler. You don't want to have to replace your Mass air flow sensor.
@@stanfieldjeanty9204 Agree, but do I want a only used once MAF cleaner standing in the garage next to all the other " special " only used once things? LOL. Is pure alcohol or ethanol useable?
You can also use electrical parts cleaner which is even more gentle and works great. Its meant for all electrical parts from stereos to maf sensors.
Just use MAF SENSOR CLEANERS.
You are to give folks the same things you would want, eat, buy. Not leftover scraps.
I get what you are saying, but America needs to do better. Especially with the kiddies.
They say not to use this product on Toyota vehicles, or Lexus
It does say that but only for 2006 and older 👍🏼 nice catch
That shit does not work 😂
Brakekleen works for me
I think it really sucks that you can't use carburetor cleaner they make you buy a special cleaner 😡🤬
$7/$8 bucks at autozone , can't beat it
Curious if this will also work with MAP Sensor...
We can do with WD 40 ?
No, because it leaves residue on the sensor causing wrong reading
Once in blue moon my car just dies when idling... I wait 30 seconds then restart it. Is that mass air flow sensor? My car runs good....once in a while my car revs up a second when I park it or idle too.
Could be this if you haven't changed your air filter in a while , they tend to get backed up with dirt and debris , making the engine think it's not getting any air flow, so try that. Also check purge valve , they tend to go bad aswell causing the engine to stall, making it think it's not getting enough fuel to the engine
@@LetsMakeItHappen23 actually it turned out to be the cam shaft position sensor.
@@edmandell3064 no bad , that's a quick fix , did it yourself ? Or auto shop?
Auto shop.
Can I clean it with normal CRC ?
It is recommended that you use ONLY mass air flow sensor cleaner. All of the other cleaners are either too harsh or they leave behind a residue when they dry which will actually throw the reading of the sensor off and mess up your fuel trims making your vehicle run poorly.
Or use electrical parts cleaner. Works the same and you can use it for other electrical applications as well from computer parts to car parts.
Maybe we can clean with alcohol