Engrave Tumblers with xTool S1 and RA2 Pro
ฝัง
- เผยแพร่เมื่อ 21 พ.ย. 2024
- Today we cover a step by step guide on how to engrave cups or tumblers with the xTool S1 laser engraver using the RA2 pro chuck. We talk about setup, settings, engraving, and more.
Link to video of how to assemble the RA2 Pro: • Assemble xTool RA2 Pro...
If you would like to buy a Laser Engraver from xTool we might have mentioned in this video we would appreciate it if you would use our affiliate link here to order it, also be sure to use the $80 off code: xToolPartner at checkout: www.xtool.com/...
Our custom laser file designs can be found on our Etsy shop here: www.freshstart...
Check out our amazon affiliate shop with all the laser tools and accessories we may have mentioned in this video: www.amazon.com...
or go to www.amazon.com... then click on the main list.
Follow us on facebook for other cool projects:
/ freshstartcustoms
Follow us on instagram:
/ freshstartcustoms
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! - แนวปฏิบัติและการใช้ชีวิต
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
How do u know the Rotary is completely straight? I'm worried when I engrave its going to be all crooked if I didn't put it in straight enough
@@FabstaPizza you can put a small level on it
@@FreshStartCustoms I don't mean like that, I mean where it actually sits in the machine, should I have to build something thats straight that fits perfectly in the machine and lay it against it so that its straight? I'm scared to line it up by eye lol i'm thinking its gonna come out crooked
@@FabstaPizza yea you might be able to attempt that too.
I use a carpenter triangle to square up the ra2 with the laser head support bar
When leveling, remember that the Laser may be sitting on a surface that is not necessarily level. So the position of the level bubble on the tumbler should be the same as the position of the bubble on the laser module.
@@sgriffin130 true, I feel like all lasers should be on a level surface already however for best results.
@@FreshStartCustoms Yes I agree. But there's level and then there's level😀
@@sgriffin130 ha ha yeah
What was the run time to engrave something that size?
@@blakemccarthy1723 I believe it was only like 15 mins. Somewhere around there.
How did you get rid of the Wobble?
@@jagbuddy I just retighten the cup flush again. I noticed it was loose after filming that section so I make it flush in the chuck and tightened it again
Did you make the engraving program?
@@boltgodzeus9021 do you mean the file? If so yes that’s my file but I don’t have it listed anywhere right now
@@FreshStartCustoms is it difficult to make programs files?
@@boltgodzeus9021 it can take a decent amount of time depending on what type it is. I use illustrator to make them.
@@FreshStartCustoms good job! 👍
@@boltgodzeus9021 thank you