Thanks very helpful I like watching a how to video before I touch anything even if I believe u know how to do it because you never know if there's a trick to it
WELL DONE! I had been meaning to due my coolant on my 2019 mt09 but couldn’t find many videos on the procedure. You’re was very well done and explained it all very throughly as I was following along for each step of the way. I appreciate you man! Thank you!!
I use pentosin pentofrost A3 for my 2019 mt09. I change the coolant every 2 years. Good tip to check back the coolant after a 30 mins ride. Let bike cool down for several hours😊
Excellent video, made the job look easy! Especially grateful for the trick to check the coolant level with the LED flashlight. I gotta ask though, what front paddock stand are you using and how did you get it in that hole in the headstand? Last headstand I got was a bit short, and where the horn is located made it impossible. Did you relocate it?
Thanks man. I didn't have to move anything to get the front wheel stand in. The front stand is a woodcraft with a 20mm pin. Had to to make some adjustments to it but it works no problem for me.
If you're filling the reservoir before filling the radiator do you need more than 2 quarts total of coolant? I'm doing a '17 fz09 and I just bought 2 yamacools.
Thanks for showing that top collar goes in back. Another video shows it incorrectly going in front and I couldn't get it. Wasted an hr. before doing more research.
My 16 XSR hasn't been done yet, and neither has my 13 Speedie for that matter. 😬 Guess I'd better get on it!. Thanks man!, good stuff!. Gotta love TH-cam!.
2018 MT-09 2 32 fl oz bottles of Yamacool is enough if you don't bother with that pain is the A** overflow bottle. Gets you 95-90% flushed. Drain. Heat to 150. Top off. Let if fully cool 4 hours or overnight. Top off radiator one last time.
helpful video thanks ,,that spacer was annoying ,I wrapped some teflon tape around it and it snugged in enough to hold in place ,after I got fastener started I put the lower spacer in ,,that seemed like an after thought from Yamaha Its weird how your camera made it look like it was the left side thanks again
I like the welcome to Hell. Dry appropriate. Another hellish job is reinstalling the rear wheel and tire. Very nice how too.
Thanks XSRDT- Overflow bottle is tricky - a small dab of grease helps hold those spacers. Safe riding amigos.
Solid tip dude!
collected, no frills. Thanks!
Great video! Made changing mine super easy!
I'm glad to help! Thanks for checking out the video
Thanks very helpful I like watching a how to video before I touch anything even if I believe u know how to do it because you never know if there's a trick to it
Glad to help, thanks for checking out the channel
WELL DONE!
I had been meaning to due my coolant on my 2019 mt09 but couldn’t find many videos on the procedure. You’re was very well done and explained it all very throughly as I was following along for each step of the way. I appreciate you man! Thank you!!
No problem! Glad to help
I use pentosin pentofrost A3 for my 2019 mt09. I change the coolant every 2 years. Good tip to check back the coolant after a 30 mins ride. Let bike cool down for several hours😊
Thanks from Va🤙🏾
Cheers mate....very useful vid 👍🏻
Excellent video, made the job look easy! Especially grateful for the trick to check the coolant level with the LED flashlight. I gotta ask though, what front paddock stand are you using and how did you get it in that hole in the headstand? Last headstand I got was a bit short, and where the horn is located made it impossible. Did you relocate it?
Thanks man. I didn't have to move anything to get the front wheel stand in. The front stand is a woodcraft with a 20mm pin. Had to to make some adjustments to it but it works no problem for me.
Very useful 👏👌🏻, any other coolant option from motul ?
I will try it! Soon 1K subscribers! Nice
Thank you!
That white spacer, I've lost my mind put it in back😅
Worst part of doing this job lol
Great video man
Thanks dude!
do you have a video of new exhaust by chance ,,The sound
If you check the riding clips playlist look for raw audio in the title
If you're filling the reservoir before filling the radiator do you need more than 2 quarts total of coolant? I'm doing a '17 fz09 and I just bought 2 yamacools.
Two yamacools should be enough
@@XSRDetroit I was just overthinking it. Very helpful video. Thank you.
What kind of oil are you running? Thanks
Mobil 1 full synthetic
How do you open the radiator cap?
0:28 there you go
👍🇮🇹
how much coolant do we need to fill it dude?
Just under 2 quarts
Just use a syringe…that coolant reservoir is a pain in the ass.
Came here to say the same.
Thanks for this! Very well explained and no unnecessary fluff. :)
Thanks for showing that top collar goes in back. Another video shows it incorrectly going in front and I couldn't get it. Wasted an hr. before doing more research.
My 16 XSR hasn't been done yet, and neither has my 13 Speedie for that matter. 😬 Guess I'd better get on it!.
Thanks man!, good stuff!.
Gotta love TH-cam!.
Thanks for checking out the video!
2018 MT-09 2 32 fl oz bottles of Yamacool is enough if you don't bother with that pain is the A** overflow bottle. Gets you 95-90% flushed. Drain. Heat to 150. Top off. Let if fully cool 4 hours or overnight. Top off radiator one last time.
I learned
DONT take that Coolant assembly off
That you fight with forever
How much liquid coolant be prepared?
Should use under three quarts
took me a good 10 minutes to get the radiator cap back on 😭
Does anyone run one gallon of distilled water when draining coolant as the bike is running?
Tengo fuga por la tapa del radiador, que debo de hacer?
helpful video thanks ,,that spacer was annoying ,I wrapped some teflon tape around it and it snugged in enough to hold in place ,after I got fastener started I put the lower spacer in ,,that seemed like an after thought from Yamaha Its weird how your camera made it look like it was the left side
thanks again
I had to film portions of this video with the camera upside down and fix it in post, which makes it look flipped. Thanks for checking it out!
how much coolant does it need to replace? are two bottles of yamalube yamacool enough?
That will be enough. I bought a third bottle and didn't use it.
Where did you get the engine cages from?
They're Givi engine cages powder coated gold
awesome video mate, looking forward to changing my coolant!
Glad to help! Thanks for checking the video out!
Did you pour any coolant in the reservoir before you did in the radiator?
Yes
@@XSRDetroit thanks