Bambu Lab X1-C Combo - Can it be set up and print in 15 mins? The Bambu Labs X1 Carbon Combo offers a variety of advanced features including built-in camera monitoring, dual auto bed leveling and multi-color/material printing capabilities. - Bambu Lab X1C Carbon - www.bambulab.com - PLA+ - amzn.to/3zIEyde Key Features: Prints material up to 300°C 256 x 256 x 256mm build volume AI inspected first layer Up to 16 multi-color printing Chapters: 00:00 Intro 00:33 Unboxing 01:27 Remove Plastic Bag & Tape From Font Door 02:24 Remove Tools & Accessories Box 03:39 Remove 2 Hex Screws 03:52 Remove AMS from Printer 04:15 Remove 4 Hex Screws 04:25 Remove Tray 04:38 Remove Foam & Cardboard 05:20 Remove Packaging From Glass Top 05:36 Place AMS on Top 06:02 Insert PTEF Tub 06:12 Find Cables: 4 Pin & 6 Pin 06:25 Plugin 6 Pin Cable 06:54 Loope 6 Pin Cable 07:08 Attache Spool Holder (optional) 08:38 Remove 3 Hex Screws 09:00 Flex Printed Circuit & Screen Install 09:44 Plug in Pinter 10:21 Install Bambu Handy Labs 10:56 Set Up Network 11:19 Scan QR Code to Bind Printer 11:52 Agree to Terms 12:28 Calibrate Printer (not including this time - 16:31) 14:44 Remove Foam Under Print Bed 14:54 Set Up AMS 15:11 Remove Stickers & Unpackage Desiccant Packets 16:06 Install Filament Into AMS 17:05 Firmware Update (not including this time - 20:00) 19:50 Start Print File 22:06 Print Complete 22:51 Timelapse 23:28 Clean Bed 23:52 A Print Using AMS - 2nd Print On Device 24:18 How Long It Took to Set Up, Calibrate, & Install Firmware 25:01 Final Thoughts & Review of the Product Check out my website at mcfixit.us Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #bambulabs #x1c -- Supplies used to record this video: * GoPro Hero 7 Black - amzn.to/3f3ALtb * 256GB Flash Drive - amzn.to/33pAueG * Vlogging Frame - amzn.to/33tajE0 * GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu * Youmic Lavalier Lapel Mic - amzn.to/2R55sWX * Boom Stand (tripod) - amzn.to/3bdkQaw * 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
Great video. Thank you for the full tutorial. I am looking at purchasing this very soon. I got a little more to save up, but with that discount still available. I will have to do it soon!
Bambu Lab X1C Carbon - www.bambulab.com This is where I bought mine from because if you have any issues it's easy to work with them. I know that Micro Centers have some too. They also have an extended warranty if that's something you like to have. Thanks for watching and commenting!
Just wondering, did you use glue stick? I just received my X1-C but I didn't purchase the AMS option. My printer didn't come with any sort of glue stick.
@MCFIXIT Z the instruction booklet said to. I just thought that was odd. I'm not new to 3D printing whatsoever but totally to the X1-C and its software. The benchy printed flawlessly. Probably the print I've seen in 10 years of printing. I did get a Lidar error message though but haven't looked for a cause yet.
Bambu Lab X1-C Combo - Can it be set up and print in 15 mins?
The Bambu Labs X1 Carbon Combo offers a variety of advanced features including built-in camera monitoring, dual auto bed leveling and multi-color/material printing capabilities.
- Bambu Lab X1C Carbon - www.bambulab.com
- PLA+ - amzn.to/3zIEyde
Key Features:
Prints material up to 300°C
256 x 256 x 256mm build volume
AI inspected first layer
Up to 16 multi-color printing
Chapters:
00:00 Intro
00:33 Unboxing
01:27 Remove Plastic Bag & Tape From Font Door
02:24 Remove Tools & Accessories Box
03:39 Remove 2 Hex Screws
03:52 Remove AMS from Printer
04:15 Remove 4 Hex Screws
04:25 Remove Tray
04:38 Remove Foam & Cardboard
05:20 Remove Packaging From Glass Top
05:36 Place AMS on Top
06:02 Insert PTEF Tub
06:12 Find Cables: 4 Pin & 6 Pin
06:25 Plugin 6 Pin Cable
06:54 Loope 6 Pin Cable
07:08 Attache Spool Holder (optional)
08:38 Remove 3 Hex Screws
09:00 Flex Printed Circuit & Screen Install
09:44 Plug in Pinter
10:21 Install Bambu Handy Labs
10:56 Set Up Network
11:19 Scan QR Code to Bind Printer
11:52 Agree to Terms
12:28 Calibrate Printer (not including this time - 16:31)
14:44 Remove Foam Under Print Bed
14:54 Set Up AMS
15:11 Remove Stickers & Unpackage Desiccant Packets
16:06 Install Filament Into AMS
17:05 Firmware Update (not including this time - 20:00)
19:50 Start Print File
22:06 Print Complete
22:51 Timelapse
23:28 Clean Bed
23:52 A Print Using AMS - 2nd Print On Device
24:18 How Long It Took to Set Up, Calibrate, & Install Firmware
25:01 Final Thoughts & Review of the Product
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #bambulabs #x1c
--
Supplies used to record this video:
* GoPro Hero 7 Black - amzn.to/3f3ALtb
* 256GB Flash Drive - amzn.to/33pAueG
* Vlogging Frame - amzn.to/33tajE0
* GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu
* Youmic Lavalier Lapel Mic - amzn.to/2R55sWX
* Boom Stand (tripod) - amzn.to/3bdkQaw
* 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM
* Portable Battery Powerbank- amzn.to/3vJQc0q
* 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
Great prints! That thing has so many possibilities!
Thanks! I really like this printer and excited to see what it can do in the future!
Great content as always. I want one of these printers! So easy to set up and print!
Thanks so much. I really enjoy making these videos!
Great video. Thank you for the full tutorial. I am looking at purchasing this very soon. I got a little more to save up, but with that discount still available. I will have to do it soon!
Thank you so much for saying this. I really enjoy making content like this!
Great Tutorial!
It helped with my setting up.
Thanks so much! This is a great printer! I’ve got it running right now with a few test products that I hope to publish soon!
Do you have a link to where you bought your printed???
Bambu Lab X1C Carbon - www.bambulab.com
This is where I bought mine from because if you have any issues it's easy to work with them. I know that Micro Centers have some too. They also have an extended warranty if that's something you like to have. Thanks for watching and commenting!
Just wondering, did you use glue stick? I just received my X1-C but I didn't purchase the AMS option. My printer didn't come with any sort of glue stick.
No glue sticks needed!!! One of my fav things about Bambu products
@MCFIXIT Z the instruction booklet said to. I just thought that was odd. I'm not new to 3D printing whatsoever but totally to the X1-C and its software. The benchy printed flawlessly. Probably the print I've seen in 10 years of printing. I did get a Lidar error message though but haven't looked for a cause yet.
yo caseOh?
??? Not sure I understand your comment.