วีดีโอ

Thank you for the information about the throttle body and air intake. I hope this fixes my rich air flow fuel mixture so I can pass smog.😂

I had a higher end Launch (Crp919e) and this seems to have all the functionality condensed into a small package that can save you a bunch of money. Would have been awesome if it was Bluetooth/wifi so that you could ditch the cord,but it seems fine.

I have a 2013 dodge caravan I’m experiencing the same issue

Thought knobs needed to be replaced. Just needed cleaning

great video, but not sure if you mention "What type/size of bulb does it take"?

You forgot to grease inside the Rubber boot Brake Pins that screw the Brake Pads in tight sometimes not greasing can wore out the brake pads unevenly 😊

Is this what is included for $199usd on the bambu site? Dobi need the combo kit or just this?

Just turn up the radio volume

Why is it so dull? Others I've seen the color is super brilliant

I read and was told not to use the fridgerant with the sealer because it clogs stuff it shouldnt also if you do have an AC problem that needs professional service a tech will not work on it because the sealer will damage therer service equipment . So you will have to replace all AC parts , compessor , condensor , etc ....

Excellent video, my friend all the other videos, they show only the front sides, but they don’t show nothing about the backside thanks to make that video

Only thing I didn’t like on this video is the heavy breathing into the mic, I was using AirPods and holy crap, that was uncomfortable. The rest… Great video

Worked (: thanks man

Thanks for the information MC Fix it👍

Very helpful thank you great video

I have a 5 gallon but the original cap fell inside it. Any ideas how to get that out? I’ve used a long pliers a it doesn’t wanna come out.

Completed this end to end. Worked great! Thank you! My only question is about the tool… You mentioned in the video that maybe the tool wasn’t perfect for this model? I wondered the same thing. Did you find that another tool was more appropriate?

Thanks for a very helpful tutorial. I had smooth sailing except for getting the beater bar into the drive belt. I had to have my wife slide the bar into the belt while I kept it stretched out. That was tough, but we managed it. I will get the specialty tools if I have to do this again. I’m glad I bought the clutch assembly because the old one had definitely failed after 16 years of steady use. Thanks again!

Thanks for a very helpful tutorial. I had smooth sailing except for getting the beater bar into the drive belt. I had to have my wife slide the bar into the belt while I kept it stretched out. That was tough, but we managed it. I will get the specialty tools if I have to do this again. I’m glad I bought the clutch assembly because the old one had definitely failed after 16 years of steady use. Thanks against!

Can you carry a retriever?

Heat up the screw

T10 on the Dyson Animal

Looks easy enough, but my handle will not twist off. I have a model 17, maybe not the same process

A fellow disc golfer nice! great video im heavily considering buying this printer

Thanks for posting this. We live in the country, and it's really hard to get people to come out and help us fix anything. We rely on posts like this to help us take care of ourselves and our home.

Ur such a stud.... 😆

Great video. Short and sweet. I just searched to see if I would need any special tools and found your video is all I needed

hi - thanks for great video. I'm just a DIY'er so my apologies that I don't know the right terms to use. I have a 2016 Grand Caravan so the "fuse box" (TIPM) layout is different than yours. However, I located and was testing the starter relay, as you did. I was attempting to jump between pin 30 and 87 as you did - buts here's the thing. As soon as I insert ONE side of the jumper wire into slot 30, the starter cranks over. I don't have to actually touch slot 87! that seems really strange to me. A short maybe? What do you think? (thanks in advance)

would love some help understanding why its important to know if the fan spindle rotates clockwise or counterclockwise, and also how the fan blades are facing or air will blow in vs. out. replacement motors come in CW and CCW directions and buying the wrong one will result in not exhaust but air blowing in

Really good, detailed & helpful video. Btw did you forget your bungee cable that was hanging on the last wheel… lol 😆 I probably would have done the same 😆

Thamks to you no Maytag repairman needed here! ( If there's even still Maytag repairman )

👍👍😊😊

👍👍😊😊

👍👍😊😊

Save me allot of time !! Thanks

Learn how to install a Hyknoot High Bay Light with all of the tools and supplies you will need to complete the job. THE TOOLS & Supplies - Hykoont High Bay Light - - Drill & Drill Bit - Eye Hooks (x2) - S Hooks (x2) - Safety Chain - Philips Screw Driver - Pliers - Plus, it includes the hardware with the package CHAPTERS 00:00 The Project 00:46 Unboxing 01:29 Tools & Supplies 02:12 Demonstration on How Bright the LED Light is 03:54 Install Eye Bolt 04:31 How to Install Eye Hooks 05:05 Add Safety Chain 05:16 Add S Hook for Light 05:38 Install Light to Safety Chain 05:46 Install Light to Eye Hook 05:57 Hook Up Your Wiring or Plug It In 06:14 Results: Daytime 07:25 Results: Nighttime More informaiton about the High Bay Light Optional: 100w 40k, 150w 40k, 150w 50k, 200w 5000k This video: 200watt, 5000k Quantity: 1, 2, or 4 packs Size: 5 inches x 11 inches 1.22m/5ft extension cable (US Plug) Great for barns, garages, sheds, work areas, and more! Super Bright, Light Weight, Well Constructed, 5year warranty. This video was done on a Hykoont UFO High Bay LED Light but will be similiar to other Hykoont products. Check out my website at mcfixit.us #hykoont #highbaylight #mcfixit Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #autorepair #rav4 #toyota #channgingbrakes #carrepair #mechanical -- Supplies used to record this video: * GoPro Hero 7 Black - amzn.to/3f3ALtb * 256GB Flash Drive - amzn.to/33pAueG * Vlogging Frame - amzn.to/33tajE0 * GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu * Youmic Lavalier Lapel Mic - amzn.to/2R55sWX * Boom Stand (tripod) - amzn.to/3bdkQaw * 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH

Cool! Thanks much✌🏻

Is it ok if I leave the old gasket? Because new one slight small

Your lucky to get a reasonable tool kit. All I got was a cardboard box with 2 all metal hex keys, not the nice plastic handle type. The rest of the items were in a bag. UK delivery if that makes any difference. However no difficulty in getting perfect prints.

Watched this a few times! Gonna get the parts, and tools ready!

THANK YOU!!! Was able to fix my Dyson. Really Awesome Post

We hav this problem. New battery, starter, alternator, fuel pump…still🤦🏽‍♀️

Don't forget, everyone, to take a shot every time he mentions caulk with a hard "L"! lol

for my project I just have to build another step like the one that's existing already there and just build a wider version of the same height and everything and then on the left side it'll have a ramp and a rail to hold on to I'm not sure if I going to put a rail the part that's against the wall maybe not but I am going to put one on one side and then there's going to be another rail going forward so in case somebody wants to walk straight ahead down the stairs they can but for the ramp it's going to be on the side I don't know if my mom will allow me to put the ramp on the side because she has a thing there that shouldn't be there because the ram could go there and that way she has a way to get down without getting hurt

I need to build one that would fit onto three stairs so the first step is a really deep step like you stepped on a lot so the previous owner added a box to cut that step in half then there's a half circle brick step and so what I want to do is I want to put a long box that goes from one end to the other and then on the one end on the I want to say if you're facing the door in the inside of the room it would be the one on the left side if you're coming in the room it would be on your right side and build a little ramp that goes down there and I want rails that go down forward and rails that goes sideways so it's like a two-way so you can either go forward and step down the rest of the way or you can turn to your right as you and go down the ramp and that's what I need to build but I'm not sure how it I do that I have a picture of the area but I put it too bad TH-cam doesn't have a way to upload pictures so that the TH-camrs who upload their videos could get a better idea of what we're working with when asking questions

I've been chasing an intermittent no-crank/fire on my mother's '09 Caravan. I am hoping this will remedy the problem because I'm one fuse short of lighting the entire thing on fire (not really)... Thank you for this video, fingers crossed I can reply back that THIS fixed it. If not, at least it helped me eliminate something. Thank you for the immensely thorough video.

you did a really good job on this. I've already done our kitchen, and I'm getting ready to finish the entire downstairs. The challenge I face is installing around a divider and going backwards into the dining room. I'm going to have to practice connecting the planks in reverse a bit before I tackle that. Thanks for the vid!

Great presentation, no annoying music, clear instructions. Good comments on the errors on torque specs and which rotor for drivers and passenger sides. Question: where are the hydraulic jacks postioned to jack up the front end of the Frontier ?

Use anti seize on spark plug threads and dielecteic grease on plug covers.

We appreciate your effort in making this video. That said, we NEVER cut off one of the adjustment screw holes … period. You should’ve made your side to side measurement …subtract that from 36 inches … and then take half of that measurement from the left end and half from the right end. Your method decreased your ability to adjust to the threshold by 25% while simultaneously making those adjustments be well off center. Short of re-shooting the video… You should add a disclaimer to the front saying “sometimes you learn on the job” and that when I get to the point of cutting the oversize threshold… Cut off half the excess material from the left hand and half from the right so that you maintain all your adjustment screws and they will be centered properly. Thanks again for the effort!