Thank the good Lord above for you man. Was sitting at Loves dead and defeated. Your video popped up while searching. 1 20a fuse later and I’m on the road again. Praising God almighty. Thank you sir.
Hey man, I was sitting here stranded at 11:45 PM an hour from home in a not so great neighborhood in Fargo North Dakota. I had this issue and called my wife to wake up our two little boys and drive all the way over here and pick me up as well as all of my music equipment. While waiting for her I opened up your video and checked that fuse, that fixed the issue!!!!! I was able to call my wife before she left the house so they could get back into bed. I am so very thankful for your video buddy. God bless you.
That you so much for the video, you saved the day and fixed the truck. Your fix was exactly the correct information. thank you so very much!@@THEMOWERMEDIC1
Mr I wish I had your address to send you a gift. You saved me hours of troubleshooting on top of getting me out of being stranded away from home. Thank you 10 times over for sharing this. God bless! I hope you have a good day!
I thought his solution is too simple but my truck, an '09 F150 worked perfectly after I replaced the fuse. No need to transfer it because it was not burned just a simple case of broken fuse. A million thanks to you Sir.
Thank you so much for this video!! I was stranded an hour from home with this problem and after the first troubleshoot didn’t work, I was worried. Found your video and replaced the fuse which was enough to get home! Showed my husband your video and he’ll attempt this permanent fix.😊
A big shout out to you for your video. I was stranded in the woods but with your help I was able to create a jump on the fuel pump fuse to get it cranked and back to the house. I will order the rewiring fix and get that installed. Until it arrives I just put in another fuse. Much appreciated!!!
@@smokenfilmz4184 a jump is went you replace the fuse with a solid metal. I didn’t say anything about a “jumpstart”. Everyone gets to be a dumbass. Today was your day.
Thank you! You saved me 2 hours of fooling around with a fuse that has already been converted. Sticker & everything. Fuel pump isn’t working yet but at least this issue is eliminated.
Thanks,,,you saved me money. I've had my truck for yrs and tried to start it this morning with no luck.Found your video and changed fuse. Running great now. Thanks
Hi Guy...my truck had this issue 2 days ago. I was sitting stranded and wad stressed about what the problem could be. I searched for videos and your video was the first to pop up. After changing out that fuse my truck started right up!!! Im so grateful for you at a very stressful time and would like to sincerely thank you for being on here giving us your knowledge 🙏🏾 Im definitely subbing to your page
First an engraved Thank You for posting this video Now I have always been taught that a fuse does not blow for no reason Is there anything else I should repair Thanks again Conard
Perfect video, thanks! I had pulled my pickup up on ramps, turned it off, and proceeded to change my oil. I got all done changing my oil, and went to start the truck and it crank and crank tune would not fire. What the hell could changing the oil have done to make my vehicle not start, LOL? So I look on TH-cam to see if there's any relevant information about a vehicle not starting after oil change, and this video is one of the first to pop up. Boom, easy solution for what could have been a nasty problem.
Thank you for this video. My 2009 Ford F150 started this last week. Found this video yesterday at work. As soon as I got home the fuse in spot 27 was not only blown, but burnt. It took me a minute to get it out. Going to attempt the reroute to the new slot tomorrow when the part gets in. You did an amazing job explaining this and hopefully my baby will be running again tomorrow.
Had to comment kuz I couldn't believe how easy that was. First video I watched and it's like it was made just for me. I got a 2011 5.0, checked and fuse 27 was burnt out! The only other one that's same fuse is 76, swapped them and started right up. Started shaking right away and all kind of other lights came on so you really need that one too lol. Went and got a pack of fuses for $5, problem solved! Thanks!
My truck just did the same thing, got the parts ordered because I don’t have another vehicle, cross my fingers it will work. Thank you for this video, god knows what a mechanic would charge.
Saved my morning with a quick fix to get me to work. First time this has happened with this truck. Might have to do the conversion if it happens again. Thanks!
Thank yu sir was in my 2011 5.0 this morning just listening to my subwoofers when a battery icon showed up on the dash. Turned it off and tried to start it again and cranked up but do not start. watched your video and checked the fuse and that boy was burnt to a crisp. managed to get it out with little pliers and replaced it with a new one for the time being.
Thank You, sir. That fuse was the culprit. Replaced it and so far, so good. Hopefully, I don't have to do the replacement fuse location anytime soon. Thanks again!
Spot on, truck wouldn't start and I found this video at the top of my search, I pulled the fuse and sure enough it was just like he said. Very helpful video
Thanks for the video. Quick update on my 09 4.6. similar issue. I did the fuse relocation, and checked the normal things. Bt noticed my truck would not start even on starter fluid in the intake. My problem turned out to be the crank position sensor. This happened about 3 months after replacing my water pump. I think the coolant damaged the sensor. Hope this helps.
Thank you for this information, if you were here I'd buy you dinner, instead I'll tell my friends how you saved the day and consequently made me look like a guy who fixes things. Semi-stranded. But no more thanks to you. A follow & a like and a huge thank you from Connecticut
I want to thank you so much for your help with the bugs in my truck I thought about taking my shotgun out to put a hole in the bed of my truck for the fuel pump 😂 I'm going to try your method first
I guess Ford engineer's knew there fuse box was junk when they put it in a very convenient place to work on! In the way to do anything else on the truck!🤣
Thanks for sharing! The starting problem with my 2013 F-150 5.0 was intermittent so I thought the fuel pump was going bad. Checked the # 27 fuse and sure enough, the terminal piece was burned (but the fuse wire was still intact - which explains why the truck would start sometimes and not start other times). I'm going to run with just the new fuse for now (I figure one fuse lasted 10 years before the starting problems began, maybe it will last another 10 years). I now carry some spare 20 amp mini fuses in the truck and if it happens again soon, I'll get the Ford fix kit. You would think Ford would have had a service bulletin or something to correct the problem.
Thank you, I have this issue with my 2014 F150, I pushed all the fuses down and was able to get home, AC would not come on until much later.....mechanic told me the fix for this was to replace the Electrical Harness, which means going thru the fire wall and removing the dash. He gave me an estimate of $5000. I felt like it was too much and I was afraid that removing the dash might mean he could not put it back like the factory did.
Thanks as always, Mower Medic 1for the great repair tips, be they the lawn tools or the truck that gets them and you to the jobsite! I've got an F150, so this one is definitely a video I'll need to keep! Wishing you all the best!
So I have the same problem, I checked that fuse and it is good in my situation. I also checked the relay in the passenger side floorboard that tends to get knocked loose. All of these are good. My truck cranks but will not start. So what do you think am I looking at needing a new fuel pump in this case
Great repair !! But I'm not completely sold on the heat shrink/solder .. I would of used the crimp connector supplied in the kit and then soldered and heat shrink.. hope it works out for you !! See you on the next one
I've been using the heat shrink solder connectors on cars and trailers for a few years. Squirrels around my house make lots of harness work. Tree rats!
@@THEMOWERMEDIC1 yes see the problem is , I replaced the #27 fuse , turned out it was burnt out . Still wouldn’t start & I just replaced the whole engine after being diagnosed with a compression issue . Still no start . Now I’m back here trying to figure out if the spot where the #27 fuse insert is just completely burnt out as in replacing the fuse won’t make it start because the connector to the wires is crisp ? hoping this video is my problem.
I'm having a crank no start issue, unfortunately it's not the fuse. My pump says it's on and no fault, the tachometer moves when cranking, mass airflow says no fault. My only guess is fuel pressure at this point.
At 13:56 when you started the truck it sounds like the starter stayed engaged for a extra second after the truck is running. My truck is doing the same thing do you think its normal or a potential problem? thank you My truck only does it on cold starts
Even if it is done with a repair sticker, verify it! Mine was done by a dealer but they hooked fuse 70 to the blower motor :(. There are similar wires in the box.
Hi I checked the link an I have a 2009 f150 king ranch an it says compatible for 2010 to 2015 will this work for a 2009 an by the way my fuse was burnt an I changed an it started thanks so much I was stranded at the gas station an your video told me just what the problem was.just wanna know would it work for 2009?
hi there cool video I was wondering what type and model of scaner that is, do you know if it will show live miss fire counts on f-150? and do other tests too like cylinder contrubution tests and fuel deleiver tests?
Thank the good Lord above for you man. Was sitting at Loves dead and defeated. Your video popped up while searching. 1 20a fuse later and I’m on the road again. Praising God almighty. Thank you sir.
Hey man, I was sitting here stranded at 11:45 PM an hour from home in a not so great neighborhood in Fargo North Dakota. I had this issue and called my wife to wake up our two little boys and drive all the way over here and pick me up as well as all of my music equipment. While waiting for her I opened up your video and checked that fuse, that fixed the issue!!!!! I was able to call my wife before she left the house so they could get back into bed. I am so very thankful for your video buddy. God bless you.
What might this issue cost to repair?
@charleswilson7841 1 hour labor plus parts and supplies
That you so much for the video, you saved the day and fixed the truck. Your fix was exactly the correct information. thank you so very much!@@THEMOWERMEDIC1
Any of you have this happen w truck running so it died
Mr I wish I had your address to send you a gift. You saved me hours of troubleshooting on top of getting me out of being stranded away from home. Thank you 10 times over for sharing this. God bless! I hope you have a good day!
I thought his solution is too simple but my truck, an '09 F150 worked perfectly after I replaced the fuse. No need to transfer it because it was not burned just a simple case of broken fuse. A million thanks to you Sir.
Dude THANK YOU. F150 wouldn’t while I was in a customers driveway. How embarrassing, got it fixed and headed home. Thank you so much!
Thank you so much for this video!! I was stranded an hour from home with this problem and after the first troubleshoot didn’t work, I was worried. Found your video and replaced the fuse which was enough to get home! Showed my husband your video and he’ll attempt this permanent fix.😊
I love it when a plan comes together
A big shout out to you for your video. I was stranded in the woods but with your help I was able to create a jump on the fuel pump fuse to get it cranked and back to the house.
I will order the rewiring fix and get that installed. Until it arrives I just put in another fuse.
Much appreciated!!!
@@smokenfilmz4184 a jump is went you replace the fuse with a solid metal. I didn’t say anything about a “jumpstart”. Everyone gets to be a dumbass. Today was your day.
Thank you! You saved me 2 hours of fooling around with a fuse that has already been converted. Sticker & everything. Fuel pump isn’t working yet but at least this issue is eliminated.
Thanks,,,you saved me money. I've had my truck for yrs and tried to start it this morning with no luck.Found your video and changed fuse. Running great now. Thanks
Hi Guy...my truck had this issue 2 days ago. I was sitting stranded and wad stressed about what the problem could be. I searched for videos and your video was the first to pop up. After changing out that fuse my truck started right up!!! Im so grateful for you at a very stressful time and would like to sincerely thank you for being on here giving us your knowledge 🙏🏾 Im definitely subbing to your page
Be sure to replace that fuse holder or it’s gonna happen again
First an engraved Thank You for posting this video Now I have always been taught that a fuse does not blow for no reason Is there anything else I should repair Thanks again Conard
Perfect video, thanks! I had pulled my pickup up on ramps, turned it off, and proceeded to change my oil. I got all done changing my oil, and went to start the truck and it crank and crank tune would not fire. What the hell could changing the oil have done to make my vehicle not start, LOL? So I look on TH-cam to see if there's any relevant information about a vehicle not starting after oil change, and this video is one of the first to pop up. Boom, easy solution for what could have been a nasty problem.
Thank you for this video. My 2009 Ford F150 started this last week. Found this video yesterday at work. As soon as I got home the fuse in spot 27 was not only blown, but burnt. It took me a minute to get it out. Going to attempt the reroute to the new slot tomorrow when the part gets in. You did an amazing job explaining this and hopefully my baby will be running again tomorrow.
Welcome my pleasure!
Had to comment kuz I couldn't believe how easy that was. First video I watched and it's like it was made just for me. I got a 2011 5.0, checked and fuse 27 was burnt out! The only other one that's same fuse is 76, swapped them and started right up. Started shaking right away and all kind of other lights came on so you really need that one too lol. Went and got a pack of fuses for $5, problem solved! Thanks!
My truck just did the same thing, got the parts ordered because I don’t have another vehicle, cross my fingers it will work. Thank you for this video, god knows what a mechanic would charge.
Update?
Did it work
@@THEMOWERMEDIC1 yes, it was a tight squeeze but manageable
@@smokenfilmz4184 it worked
Saved my morning with a quick fix to get me to work. First time this has happened with this truck. Might have to do the conversion if it happens again. Thanks!
Thank yu sir was in my 2011 5.0 this morning just listening to my subwoofers when a battery icon showed up on the dash. Turned it off and tried to start it again and cranked up but do not start. watched your video and checked the fuse and that boy was burnt to a crisp. managed to get it out with little pliers and replaced it with a new one for the time being.
Thank You, sir. That fuse was the culprit. Replaced it and so far, so good. Hopefully, I don't have to do the replacement fuse location anytime soon. Thanks again!
You need to do the replacement you’re just going to be stranded again because it’s going to arc out the fuse holder
Thanks very much for a detailed vid on this problem which surfaced without warning on my 2011 F-150 5.0!
Just wanted to say thanks again. Everything worked perfectly, and my truck is running again.
Spot on, truck wouldn't start and I found this video at the top of my search, I pulled the fuse and sure enough it was just like he said. Very helpful video
thanks for the fix got her started and will put in for official fix
My brother. I wish you nothing but health and happiness..what a gem..saved me some real cash 🙏🏼
This fixed my problem, 2014 F-150 FX4 V8. Thank you!
Thank you so much for sharing your knowledge with us. It was the same exact case for me with a 2013 Ford F150 XLT with a 3.7 V6
You are a superstar. Got mine started still have to have the fuse moved but saved me a tow bill.
Thanks for the video. Quick update on my 09 4.6. similar issue. I did the fuse relocation, and checked the normal things. Bt noticed my truck would not start even on starter fluid in the intake. My problem turned out to be the crank position sensor. This happened about 3 months after replacing my water pump. I think the coolant damaged the sensor. Hope this helps.
My 2014 just had this issue. Thank you for this video!! I’m headed to spend money on Black Friday deals!!
Thank God for TH-cam and your video.. easy fix changing that fuse.. started right up 👍 2012 F150 3.7 L XLT
Be sure to replace the fuse holder or it’s gonna blow again because of high resistance
Thanks for this video. It answered a very frustrating problem for me.
A+
Thank you for this information, if you were here I'd buy you dinner, instead I'll tell my friends how you saved the day and consequently made me look like a guy who fixes things. Semi-stranded. But no more thanks to you. A follow & a like and a huge thank you from Connecticut
I want to thank you so much for your help with the bugs in my truck I thought about taking my shotgun out to put a hole in the bed of my truck for the fuel pump 😂 I'm going to try your method first
I guess Ford engineer's knew there fuse box was junk when they put it in a very convenient place to work on! In the way to do anything else on the truck!🤣
Fixed My 2009 Ford F-150 5.4 would start only sometimes this was the issue fuse was corroded thanks for your vid...
Nice tip Jeremy, my son had the 2013 with the 5.0 Coyote but luckily I don't think he ever had that problem. 👍
Check fuse and replace before it starts to burn
👍🏼 Well if he still had it we surely would but he sold it a year ago.
Thank you I had this issue on my f150 2014. The fuse was burnt. Blessings to you
Thank you very much I did the relocate thank goodness it died in my driveway.
Thank you for being a blessing now I dont have to get my wife up extra early to bring me to work. 😁
Had to comment he legit saved my ass thanx bro😅
I've got the same issue going on with my 2011 F150 XLT with the 3.7, but checked the fuse and it's still good. What else would it be?
Any update?? currently having this issue and like you fuse and terminal are not blown/burnt
Thanks for sharing! The starting problem with my 2013 F-150 5.0 was intermittent so I thought the fuel pump was going bad. Checked the # 27 fuse and sure enough, the terminal piece was burned (but the fuse wire was still intact - which explains why the truck would start sometimes and not start other times). I'm going to run with just the new fuse for now (I figure one fuse lasted 10 years before the starting problems began, maybe it will last another 10 years). I now carry some spare 20 amp mini fuses in the truck and if it happens again soon, I'll get the Ford fix kit. You would think Ford would have had a service bulletin or something to correct the problem.
Thanks who knew a 10 cent part would cause such a failure, was the exact problem with my 2014
Thank you, I have this issue with my 2014 F150, I pushed all the fuses down and was able to get home, AC would not come on until much later.....mechanic told me the fix for this was to replace the Electrical Harness, which means going thru the fire wall and removing the dash. He gave me an estimate of $5000. I felt like it was too much and I was afraid that removing the dash might mean he could not put it back like the factory did.
No
Thanks man helped out with my problem
Great tip for Ford F-150 owners.
Thanks as always, Mower Medic 1for the great repair tips, be they the lawn tools or the truck that gets them and you to the jobsite! I've got an F150, so this one is definitely a video I'll need to keep! Wishing you all the best!
0😢
Thanks so much!!! 2010 Ford F150 5.4 L...this was it
Still love them ford's
Yes their great when they are running... 🙂
Great work and fix on that one jeremy 👏 crazy common issue on these ford's like that with the fuel relay fuse issue.
I hope I get to pay it forward! Thank you for sharing this video!!!💪💯
Solder and heat Shrink mine, the solder joint Allows for a lil better connection due to amperage draw from fuel pump .
We need to do that even when the fuse is good because my don't look burned at all ! But my trunk won't start it crank but no start
If that doesn’t help. What else could I look at?
My main man,, thanks so much for your indept explanation and technical know how,, i appreciate it, gracia's querido.
Very helpful!!! You nailed it!! My problem is solved !!
Thanks for the great video. Saved my bacon.
i notiiced that there is just one wire, how does the current make a loop through the fuse?
God bless you. That was it.
Like all the other comments, I’m so thankful you posted this video. I can’t thank you enough!!
Thank you! Very helpful
Thank you very much for this video,saved my ass i was lucky it was only a fuse
Thank you! Great video. It fixed the problem.
Great video, it’s the heat what’s makes it fail.
So I have the same problem, I checked that fuse and it is good in my situation. I also checked the relay in the passenger side floorboard that tends to get knocked loose. All of these are good. My truck cranks but will not start. So what do you think am I looking at needing a new fuel pump in this case
Great repair !! But I'm not completely sold on the heat shrink/solder .. I would of used the crimp connector supplied in the kit and then soldered and heat shrink.. hope it works out for you !! See you on the next one
They work wonderful! Used
Them for over 30 years
I've been using the heat shrink solder connectors on cars and trailers for a few years. Squirrels around my house make lots of harness work. Tree rats!
Thank you - mine was corroded - wiggled it heard a sound like it connected and it then started
Was it corroded on the fuse box or the actual fuse if you don’t mind me asking?
@smokenfilmz4184 did you even watch the video?
@@THEMOWERMEDIC1 yes see the problem is , I replaced the #27 fuse , turned out it was burnt out . Still wouldn’t start & I just replaced the whole engine after being diagnosed with a compression issue . Still no start . Now I’m back here trying to figure out if the spot where the #27 fuse insert is just completely burnt out as in replacing the fuse won’t make it start because the connector to the wires is crisp ? hoping this video is my problem.
yep 20 amp fuse was the initial culprit
12:45am and truck wouldn’t start lol. Saved my ass from getting a tow
God Bless you sir! You just saved my ass big time! Can't thank you enough!!!!
When I turn my key the fuel pump gets activated ! I still need to replace the fuse and all that ?
I was told it was the interior fuse box! Now idk which it is!! 😭😭 I hope it’s only this cheap fix!
So my fuel pump turns on but now the truck doesn't crank.
This was my exact issue.. 2011 f150 5.0 thank you for the video and info.. I’ll be doing the update for the fuse also. Thank you sir!
I changed mine preemptively.
I'm having a crank no start issue, unfortunately it's not the fuse. My pump says it's on and no fault, the tachometer moves when cranking, mass airflow says no fault. My only guess is fuel pressure at this point.
Update: It was the Crank Position Sensor on My 09 4.6
thanks for sharing!!!!
Thank you
just had same issue. fuse was "OK" but dirty/corroded. cleaned it up and all is well for now?
My fuse was burned just like that little yellow one I replaced the fuse and still no start am I going to have to rewire like you did?
Yes because the socket that holds the fuse is burnt out
Thank you sooooooo much my brother!
Mowermedic what if my fuse hasn't burned out what do I do next my fusesbhasnt meltedbout
I did the dude 27 relocation kit and it got me a few blocks but died again and no it’s doing the crank no start again. Any thoughts?
what is that fuse Its okay? I have the same problem
Any of you have this happen w truck running so it died??
At 13:56 when you started the truck it sounds like the starter stayed engaged for a extra second after the truck is running. My truck is doing the same thing do you think its normal or a potential problem? thank you My truck only does it on cold starts
Great Video
Great job…👍👍
Even if it is done with a repair sticker, verify it! Mine was done by a dealer but they hooked fuse 70 to the blower motor :(. There are similar wires in the box.
How much more verification do you need other than it cranked up With no fuse in the 27 slot?
Hi I checked the link an I have a 2009 f150 king ranch an it says compatible for 2010 to 2015 will this work for a 2009 an by the way my fuse was burnt an I changed an it started thanks so much I was stranded at the gas station an your video told me just what the problem was.just wanna know would it work for 2009?
hi there cool video I was wondering what type and model of scaner that is, do you know if it will show live miss fire counts on f-150? and do other tests too like cylinder contrubution tests and fuel deleiver tests?
I think this is a mono directional scanner
Same with a v6
Thank you !
You're welcome!
My 2011 f150 6.2 has no fuse in block 27
I stated clearly in the video that this was for the 5.0
Awesome video, is there something similar for the 2004 model? Phillip Hall
Nearly 400k on my 02
Fuel control module
Thanks!
Welcome! Thanks for watching and thanks for the tip!
Thanks
i can hear my fuel pump hum will not start
Bro hit me up I got a question 4 ya like no bs same sit your doing
Drop your question here
Should be a recall on this mistake.
There is
Ford says all recalls have been prformed on my truck. This isn't one of them. Any one have recall information?
That's the stupidest place to put a fuse box