How To Replace A Transmission Fluid Pressure Switch P0847 / P0848 / P0872 / P0873
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2019
- How to replace a transmission fluid pressure switch. This specific switch is the 4th clutch pressure switch from a 2006 Acura TL.
Symptoms of a bad switch:
- Harsh shifting
- Transmission won't upshift
- Fail safe mode
This oil pressure switch reads the amount of fluid pressure and relays that info to the vehicle's computer. This allows the computer to control the shifting. (One of the many mechanisms involved.)
► Subscribe: / carsntoys
►► Tools and Supplies:
Scan Tool: amzn.to/31lXxFl
Ratchet Set: amzn.to/3lsWnCo
Safety Glasses: amzn.to/2BQKZ05
►►►How to remove the splash shield (FF to the 4 minute mark)
• How To Replace All Ext...
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
P0847 - 3rd Clutch Transmission Fluid Pressure Switch Short or Stuck On
P0848 - 3rd Clutch Transmission Fluid Pressure Switch Open or Stuck Off
P0872 - 4th Clutch Transmission Fluid Pressure Switch Short or Stuck On
P0873 - 4th Clutch Transmission Fluid Pressure Switch Short or Stuck Off
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is an Amazon Influencer Member.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys
Harsh shifting? Vehicle doesn't upshift? Fail safe mode? Transmission fluid pressure switch trouble code? It's a simple replacement.
#transmissionpressureswitch - ยานยนต์และพาหนะ
Very important to IDENTIFY which vehicle you're working on since they're all different
Because he is idiot
I did not have any engine code or any hard shifting or driving issues but i had flashing 03 on dash board of my Accord 2014. After researching and asking honda Stealers i decided to chnage this sensor. This video helped me guiding thru.could not find the hidden Bolt anyway. So approached from the splash shield side aproach. OEM parts comes with a washer 👍.some AT fluid comes out though. No big deal.
I was actually looking for info on how to test this sensor. Really good video, thanks for the info
Thanks. Very helpful much. I believe yours is the best explanation on how to replace the part.
You literally saved me a transmission if this works my guy. I was almost sure it was shot until I realized I'm shifting and getting into gear just fine (hit 80). I also had no check engine light when I took to mechanic. He even told me it was shot. But there was NO check engine lights when I dropped it off. But when I picked it up there was, This was a month ago(It literally sat for a month smh). I just checked them today randomly lmao 08 lancer: P0841 code for others it might be P0840 or both like me! He described from 4:58 on exactly what I experienced. I will be purchasing it tonight. I will come back for the result!
The easiest video to understand about this problem. Thanks
Thank you very much> can you please help me find the "transmission fluid pressure sensor" location for Skoda Octavia combi 1.6 2014.
I made a nice table that has all metric and standard sizes. Ordered by their decimal equivalent. It’s right above my workbench. So I can easily see what’s the next smallest wrench below a given size or the next largest. It’s a great tool to have handy. Thanks for the video. Great job.
Thank you for sharing your video and knowledge, this will save us a lot of money.
Where do you get a replacement tfps I’ve googled everything I can think of and can’t get one for my Dodge Journey 2010 2.0 crd thanks
I'm about to change the valve bodies n a 2010 Murano I don't have the code on me but it's a sensor or relay stuck off when I put it in drive it'll barely move an the computer is stopping it from giving it anymore gas is that limp mode like you mentioned. Would that have anything to do with the pressure switch or valve body issue ?
Hi my honda accord mk8 2.4 petrol automatic green d light is flashing and gearbox first and second gear switch is jerky from before but wen the lights starts to flash igear change get rough and high revs amd engine light comes on but wen reset goes off for a while
I changed it on my own thanx to u
Thanks for sharing it very useful
My problem which indicated it was the sensor was a flashing D3 on my console, I assumed it was that pressure sensor gone bad because everything on my car worked fine, except touch screen , which said cannot do things while vehicle in motion...
Is this the same for the 2006 -2010 Honda Civic?
Do you know if the code p0845 in a Chrysler would relate to the same issue?
P0848 is the pressure sensor just 1 sensor or is there more than 1 sensor and which one do i change if there is on a 2014 Grand Caravan?
my brother l love work you THANK YOU vere vere mauch
I like it it's really helpful
What is another name for the switch?? I jist got a p08433 code for my 2010 chevy cobalt and i cant find the part listed anywhere... do you know what the name of the switch is? The code said a transmission fluid pressure sensor but cant find that part anywhere...is there a difderent name 4 it??
Will this be on the 2010 acura tl also I got blinking D light
hi do you have a video for P0842 honda pilot 2011 Tranmission fluid Pressure sensor A? tia
How find the 14 nissan versa note transmission pressure sensor code p0846? Please help
Si alguien me puede desir donde encontrar el transmission presion switch en una 2007 murano grasias... de un Di a para otro no suelta Las velocidades
I have a 2013 dodge caravan and whenever I put it in reverse the stick seems to go hard and it gives a very bad click. I got code fluid pressure low code P0868. I checked the trans fuel it was way more than the required level so I took some oil out. I don't have any leakage. Can anyone suggest to me what to do? thanks.
Where is my pressure switch located at on the 2005 mr2 spyder with smt transmission
Hi there, pls May I know where to find this on my own vehicle Lancer ES 2008
What's the crush washer size? And is it a rubber or metal washer?
You can test them, with a very caveman multimeter
Turn the ignition switch to LOCK (0).
Disconnect the 3rd clutch transmission fluid pressure switch connector.
Turn the ignition switch to ON (II).
Measure the voltage between the 3rd clutch transmission fluid pressure switch connector terminal and body ground.
Is there about 5 V?
Replace the 3rd clutch transmission fluid pressure switch.
I furst noticed my car would not switch between gears. It would stay in a higher gear and once i got to autozone they did the check engine test. The reader popped up and said either its my transmission fluid is low(which it wasn’t) or the sensor is gone bad.
Does this go for the 2013 Acura ILX
We’re can I get this sensor at for my 2005 mr2 spyder
Can u show wich one its the 3rd one i have to replace the 3rd one, pleaseee.'
I have P0878 on my 2016 honda odyssey. Can anyone help tell me which switch to change? Hard shift from 1st to 2nd gear but only after driven for a few minutes, doesn't do it on cold start. Occasional hard shift from 4th to 5th gear.
Does anybody know where the 2004 dodge intrepid se transmission fluid pressure sensors located?
Where is my transmission pressure switch located at in my 2009 dodge journey
Hi. I replaced it on my 2014 odyssey . It turned off and drove it for a couple hours. And it happened again. Blinking f light.
Great video! Is there more than one pressure switch? I got my car scanned but they did not say I needed to replace several but had to contact a different parts store to get the switch and they told me I needed two.
Yes, your vehicle can certainly have two switches.
Muy buena ayuda dios te vendiga
Acura mdx is in the same place?
Hey bud, I have an 05 tl, no codes, transmission won't engage in none of the gears. I changed the fluid and filter. Still no luck. Would you recommend replacing the switchs?
Any trouble codes?
I have complaints about delays and rough shifts, sometimes gear 3 slips. what do you think?
I have same issue, between speed 1 to 2, gear. 😢 roughly switching
Also says p0845 transmission fluid pressure sensor sensor/switch a circuit high
I am having the shuddering right now with no error codes thrown, should this be my number 1 fix?
Get a BlueDriver OBD2 scanner to confirm. I just bought and received from Amazon and tried it... has detail report even though the error didn't show in my odometer console in my TSX 2006. I think as long as it wasn't erased from memory, the log will show when you plug in your OBD2.
Did you have to drain the transmission fluid before changing the pressure switches?
Not if they're mounted on the outside of the trannie like the one in this video. If it's mounted toward the bottom, you might lose a bit of fluid.. just be ready with your new one.
I read most of the time those sensors don’t go bad there usually something clogged up like a hose or metal in transmission pan trey.
Yes, this one was still in good shape.
Hello, maybe you can help me. I was changing that sensor and I noticed that the diameter of the new sensor is very different on the new sensor. The new one has a much smaller inner diameter than the old. So I decided to hold off. Any info would be appreciated. I checked the part number and it’s supposed to be right. Also the color is different. Thanks
Can you tell me where you got the part because all the stores I called can't find it in their system.
I can’t remember for sure, maybe rock auto, Amazon. Doesn’t matter in my case because the transmission took a final shit. Trying to rebuild it but it’s costing an arm and a dick.
Can u tell me how to replace this on a 2013 town and country
Thank you sir
Hello I need your assistance on 2007 Camry
Hi I have green light flashing next to D after driving for couple minutes,is this will fix problem?
I been through this nope it's a Silinoid
Where would it be on a 2005 Cadillac srx?
Is it P0848 ? On honda pilot 2005 ?
Gracias amigo
Not I'm no mechanic but is there not a pressure switch for every gear ?
Do the tacoma have that switch
Is that the Transmission temperature sensor
Is this the same as error code PO845?
Do you know where it's located for a 2013 dodge grand caravan?
I can show you the pressure switch lmao
P0841 what you know about that one new transmission
Which gear is that?
Isn't there more than one transmission pressure switch?
I can't find it for for my 09 gti
Que carro es ese yo tengo una odisey 2006
Hi, I have error code P0841 in my Nissan X trail 2015. Is the problem the same in your video? Thank you for answer.
Did you ever find out what caused the P0841? I've got same in my 2007 Mazda 6.
@@mrau92me yes. it's the transmission belt chain need complete overhaul. It's very expensive it's like almost buying a new car.
Hi my Honda Accord v6 2008 model problem is that the D light blinks but goes out after sometime. What could be the problem?
Either your trans oil is low or you got a faulty pressure switch. If you really wanna find out. Get a diagnostics test.
My Honda had the same issue and i scanned it and it showed a faulty intake manifold sensor.
I also have the D light blinking, did you guys find a fix? The transmission shifts good and all, no problems noted. I turn the engine off and the D stops flashing and sometimes won't turn on until couple days later.
2018 altima location?
I have a PO845 transmission fluid pressure sensor switch b circuit on my Mitsubishi Lancer GTS 2008, can someone tell me more about it and how to repair it?
Did you find how to fix it
@@rcdailydrive3080 well sad to say.. no i didn’t, its not worth fixing.. best thing is to get a used one or manual swap it
P0847 TRANSMISSION FLUID PRESSURE SWITCH
Correct 👍
What if I replaced the pressure switch and it still flashes D... what's the next step
Clean your TCC solenoid and filters.
For Honda's I can tell you to firstly look at the intake manifold sensor switch.
What vehicle is this
What car is this ?
Es el mismo que una odisey 2006
Sir,
Whats the location of this sensor in Yaris 2001.
I have a 2008 nissan altima could u help me find the location please
How many total switches are on an '08 TL (5AT)? I don't have any OBDII codes but occasionally my AT has a harsh downshift into 1st gear.
If I remember correctly, there are three.
@@CarsNToys Gratitude, I clearly see two on the AT exploded diagram. I'm going to look again to find the location of the third switch.
Did the switch fix your problem?
@@elcachanilla1759 haven't changed them yet but will before winter here...
@@CelestialSevenEl I have a 2010 V6 accord with the same harsh downshift to first. Did you get it fixed?? Much appreciated
2016 nissan rogue
How do I locate that sensor on a 2001 honda civic?
Es1
Cảm ơn bạn!
Thank you! It’s very kind of you
Is it A B or C
I can’t find the PO848 sensor where can I buy it dealer don’t have it.can you just clean it
Vehicle information??
I have a 08 acura tl...how many switches the transmission have?
Three switches 2 cream colors and 1 black
@@MegaEmagic1 hello, I was wondering if you have replaced the pressure switches on a 07-08 acura tl? I have done the 3rd gear switch but the 4th gear under the airbox seems really tough to get to. For one there is very little space for my hand to snap the connector off and there is a wire and a bracket in the way as well, do you have any advice on how to approach this? Thanks alot
@@campos9896 Under the bracket that one I used a 6" 3/8 entention to get to it or you could use a 7/8 O2 sensor socket
@@MegaEmagic1 ok thanks for the response. Do you remember if you removed the battery and the tray also or just the airbox?
@@campos9896 yes it's right under the battery holder 6" or 3" extension
P0746 toyota avalon?
Where is it in a 2016 nissan Altima 2.5
Would LOVE to know also! My car is throwing a P0841. Dealer said its throwing another code as well that means replace the tranny!
I would like to know as well because I’m getting same code p0841 and harsh shifting. Nissan Altima 2016
Hi I hope you’re still on this account I know this is a old comment but what was your problem did you have to replace the whole transmission or just the sensor
YeA done all this work just to realize my switch ain’t even there, can anyone help me find it?
I have a 2008 mazda3 s touring (2.3L) I literally can’t find it at all idk why
2016 rdx with 176k miles, P0848 code just popped up this morning. SMH
I got this code p0870 help me fix it
Having the same problem can u tell me what it is
Were can you buy these switches
Quite often the only option is the local dealer. You may be able to find a used one on ebay.
@@CarsNToys I have a 2005 and the dealers says there no such sensor on the car.I read the sensor goes bad cause a hose is clogged.
Quien es adivino para saber la marka y el modelo del carro que esta mecaneando?
2006 Acura tl
Si jaja
Still active here?
Sore l am not good spek English sore l am kurdish live of kurdstan
HEMN OSMAN awa che akae lera kaka
rozh kareem what
no help at all are car battery is on the left side
Then this post was not for you. Move it along
In 2017, pilot p177A what is it please