Clutch Pressure Control Solenoid Valve Testing and Replacement P0746 P0747 P0776 P0777 P0962 P0963
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Today we'll be going through the steps on how to test and replace an Automatic Transmission Clutch Pressure Solenoid Valve; also known as the A/T Clutch Pressure Linear Valve. This valve controls the flow of transmission fluid via the PCM or Power Control Module.
Common issues with a bad valve include delayed shifts, no downshifts and erratic shifting. Here are the trouble codes:
P0746: A/T clutch pressure control solenoid valve A stuck OFF
P0747: A/T clutch pressure control solenoid valve A stuck ON
P0776: A/T clutch pressure control solenoid valve B stuck OFF
P0777: A/T clutch pressure control solenoid valve B stuck ON
P0962: A/T clutch pressure control solenoid valve A open/short
P0963: A/T clutch pressure control solenoid valve A
P0966: A/T clutch pressure control solenoid valve B open/short
P0967: A/T clutch pressure control solenoid valve B
P0970: A/T clutch pressure control solenoid valve C open/short
P0971: A/T clutch pressure control solenoid valve C
► Subscribe: / carsntoys
►► Tools and Supplies:
Digital Multi-meter: amzn.to/2KOdFZD
Scan Tool: amzn.to/31lXxFl
Alligator Clips: amzn.to/2AQot3H
Safety Glasses: amzn.to/2BQKZ05
►► Removing a splash shield: • How To Replace All Ext...
(Found at the 4 minute mark)
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon influencer program.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys
#clutchsolenoidvalve
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
Wow, shop told me I needed a new transmission rebuild (Aamco) and said it would be from $3,700 to $4,500. Pulled off this part and one valve wasn't actuating. Got this part from junkyard for $27 and fixed! Thank you sooooo much!
Curious what your driving? 😁
What was your transmission doing? My transmission just went into limp mode. Rpm goes up but the car doesn't go nowhere.
@@fonzeefons260 Throttle body, or Solenoids are stuck in the valve body of the transmission
@@fonzeefons260 What did your issue end up being?
@@GrahamMasters87 I took it to the transmission shop and got my transmission rebuilt. I didn't look into it before taking it I didn't have the time.
I pulled off this solenoid cleaned and tested it.. I did not know about the screen in the transmission..... now I am going to pull it off again and check that screen , thanks for being detailed about that. Other videos , we're good , but not this good. Thank you.
Informative video. Very understandable, clear and informative. Following your directions I was able to diagnose bad
"b" solenoid and replace, with zero issues encountered. Thanks and look forward to other videos.
What symptoms did you have with that shift solenoid being bad?
I wish I could have had this information when I just got my 2005 TL, This is priceless, thank you so much for the info! Best Acura information in the internet!!!
Wooooow, this video just saved me more than $2,000. My son’s 2005 honda accord had a code P0746, and The mechanic said I had to rebuild the transmission. 😅
Thank you for making a great, clear video. Excellent job. Much appreciated.
Thank you! Experiencing delayed shifting. The screen was not that dirty so I plan to change the in line filter and hope for the best.... I also removed the double solenoid on top of the transmission but that one did not have much sludge in the screens ether. So I am a bit concerned!
Did you get through
Thanks buddy this is exactly the information I lookin for !😎🤘
No gasket on my mdx and 2 of the cylinders had screens very clean,almost hate that I took it off,looks old but works
Very well educated man. This was the exact video i was looking for. I just subscribed because i feel like i can trust your knowledge
EXCELLENT VIDEO!! One of the better on YT!! Congrats and thanks
Thank you so much.
Very well explained.
Next i will be removing and testing my dual solenoid.
My 04 has 130,000mi and the speeds in drive for the most part shift smoothly but sometimes bump shifts slightly but delays shifting from park into drive about 1 second and goes reverse goes right in. Any suggestions? I recently bought it and I'm doing the fluid change. Great video 👍
Great video again. Thank so much
When testing these how much movement should we see in the pistons?
i like how he doesnt say what vehicle this is hes working on as if they not all different lol
Thank you what year is it. I have a 2002 Odyssey Slamming into 2nd and 3rd gears. So I've been learning to drive very easily and I'm shifting manually now from first gear an up each gear. Thank you
Got honda accord 03 got a code p0776 solenoid B stuck off..is this solenoid B?
hey did you ever figure out?
I'm having the same problem code after car heats up for 15 min or so it will struggle to move an inch after coming to a stop it just revs higher and doesn't move. I don't think my problem is the sensor in this video I changed it and still the same problem
Hey Man I love your channel. Helping me out big time. Question- my 2k ohm multimeter reads .006 on the same solenoid. Is that 6 ohms because it’s 2k reading? What was your multimeter ohms set to? If u see this thanks for your time. Seriously
I believe that would be .6 the 2 k ohm range is just the maximum that range will read.
Good video thank you for the info
Anyhow, thanks so much for posting the video.
Would code p0970 be for this as well?
I just replaced this with a new part and still won't go pass 2nd gear and giving me the same code p0798.
What could be the problem???
Thanks great vid!
Did you figure out the problem? Im having a similar issue with my honda clutch c.
@@Panda-qv6ht did i figure it out 2 years later lol not letting me shift past 2nd also p0747
@@n54bry ..
lol 😅 trans needs rebuild... we all have same issue.. all these videos on youtube may only work for the 4 cylinder accord.. v6 3.0 needs tranny rebuild.. i changed these solenoids 3 times and still won't shift into 3rd gear.. 1,2,4 all work great, no 3rd gear.. fluid and filter change also.. internal issue with these.. there was bulletins from Honda on lots of these.. pulling my classic Toyota and Lexus out the garage and trashing these old hondas
Thank you👍
Thanks for sharing this valueble knowledge.
I have ls430 and i am getting p0761 error do u have any experience on it please share with us thanks
Thank you, very useful
Can this also be code p0741 ? I swapped out the smaller solenoid recommended with the black connector but still has this code ! The cars shifts fine to me no problems at all . Only thing is when I put into rever or drive gear takes about 1-2 seconds to engage! Please help 😊
Hey, any update on your issue? I'm having the exact same problem that you describe.
Muchas gracias
Fue de mucha ayuda la información
Gracias otra vez
Hi im having a reading of 05.8 ohms is that good or bad? It is for the same part as you are testing. Any advice is appreciated.
Is the pressure control solenoid also called the linear solenoid? I’m getting P0747 pressure control solenoid A stuck on for 2003 Honda Accord V6
Hey I’m also getting same code, did you fix yours?
Did you guys fix yours?
Thanks, that was a lot of help
whats the average repair costs? I have a good deal going on, but the car has a TRANSMISSION ISSUES P0746, I don't know if I should risk it!
My solenoid B on my 2009 Nissan Altima 2.5 is stuck open. Can you advise on whether that one is inside the transmission or accessible via the engine?
Very helpful
Great videos thanks a lot
Do I need to drain the transmission fluid before I remove the solenoid?
New subscriber thank you for the video 👍
Thank you. Hope it helps!
Thank you! Hope it helps.
Hi friend. First test of my solenoid show 6.7ohms , good or bad?
When doing the 12 volt test, does it matter the position if the wires?
Yes it does matter. Solenoid needs correct polarity to move in desired direction. How to know: for example, my Honda service manual shows connector zoomed in and marked PIN 1,2 picture. Then it explains which goes to battery positive and the other to battery negative. Then it hopefully clicks/moves like author shows here.
I'm going to do that test but I don't think it'd be that reliable if we do it while the solenoid is still on the tranny because we can't see how well the interior components move. I think it's much better to do it the way it is done in this video. It'll also give us an opportunity to inspect/clean the little screen or gasket area.
Can anyone show me where the valve is on a mitsubishi outlander 2016???
Please need this too!!!
Where is clutch pressure control solenoid A located in 06 TL? Thanks In advance
I need the same help
Would the solenoid be in the same location on a 2017 Volkswagen Jetta
Did you get this fixed? I just got the po776 code on my 2016 Volkswagen jetta tsi 1.8
@@kolef1000did you get it fixed?
WHERE DO I FIND THE PART FOR MY 2011 NISSAN MAXIMA BECAUSE IN MEMPHIS NO AUTO ZONE OREILLYS NAPA NO WHERE. THE SERVICE GUY AT NISSAN SAID THAT I SHOULD REPLACE MY WHOLE VALVE BODY I CANT FIND THE PART BRAND NEW I WANT AND HE TOLD FOR THE VALVE BODY IS OVER 1K
Do I need to remove the transmission oil to remove the solenoid?
You're a mf legend.
What vehicle is this for because I have a 2012 Altima with the same codes
What is the oem part number for c solenoid?
Very good and celar video.I just want to know if it is the Valve A cause i have P0746 in my honda Odyssey Thanks for answer
You nailed it. It's valve A stuck in the off position.
@@CarsNToys Where is the A & B valve hidden on the 2006 Odyssey?
Thank you for for this information .. i have toyota sequoia 2007 4WD 4.7l , there are truble codes p0776 and p2714 . My car did not response to rear move when i put to shif R, also the car speed was 60mile per hour and stay at shift gear no 2 .. please can you help me ..thank you
Hi, i have Civic ex-l 4d 2013. Before i change the transmission oil the transmission acting a bit erratic. No code noted. After transmission oil change, On drive gear it will roll around 4-6mph then acting like sudden engine break and car stop. But if gear to 2 or 3rd it doesn't do that. Still no code. Do you have ideas what's wrong?
Hi thanks for video. Do you live in New York City?
My valve A is stuck open on my 06 VW Jetta TDI do you have any info on this please? Where is it?
Quick question, is there a part number for the screen ? I notice that mine doesn't have one which is weird. I'm having trouble with P0747
please can you say what model of a car are you fixing?
Thank you sir
Thanks
Hi, is code P0741 also about that ?
you all are fine.
i hava a code (17 torque converter clutch fnctn) of transmission of my nissan wingroad i removed but again appear. my automic transmission os not shifting properly please help me how to solve this problem
Is this the same location on a 2020 Nissan pathfinder ?
Can I clean it with WD 40 Release Oil?
Is this for the 3.5L engine?
Nice video.
Can I perform this test without draining the transmission fluid?
I have an acura TL 2004 with the same problem, I scanned the system and it tells me P0970
OBDII: pressure control solenoid (PC) C - low circuit
Acura: problem i A / T Clutch pressure control solenoid valve Circuit C.
I removed the transmission fluid filter and replaced the transmission fluid and filter
I removed the solenoid and tried it only by connecting 12v and the solenoid opens and closes, I cleaned it with a carburetor cleaner but the problem persists.
Could you help me solve this problem in my acura tl?
Should I replace the solenoid?
I live in the Dominican Republic and I would like you to write me some recommendations to solve this problem in my car
He's telling you EXACTLY what you need to do
Rock auto has pressure switches and sensors available. Will these work or is it Honda factory?
I'd say you honestly should never use Chinese parts, search for only the oem part
I have a po0752 Honda Accord I tested it and it seems to be working fine but could it be bad or something else triggering that code
can you please tell me where the pressure control solenoid A is located on 2007 Ford Edge ...cant find it anywhere online except where you talk about it
Can you please tell me what make and year car your working on?
It looks like the 3rd generation Acura TL. I'm willing to bet on it.
I have 2016 odyssey shifts fine but after driving few kms.its starts shifting hard.i got code for p0746.any help would be appreciated.tested resistance it has 6.5 ohms of resistance
Hi was this an Audi TT if yes were was the solenoid located
Excuse me, my truck honda pilot 2003 marks the code p0730 and p0740 I have checked and me 6.7 homios the solenoid I would like to know what measurement it has to have, I would not know if that would fix my problem that my truck sometimes has, it slides like it does not want to advance even if you step on it the accelerator does not start
Can the code po776 also be caused by transmission slipping
Hi, was an altima, what did u end up doing? Please let me know, thanks!
Hi, can you show le where could be the A?.?
A is 1st and B 2nd gear?
What car is it that your working on ?
I have an 07 acura tl. Its showing codes p0962 p0966 and p0970. Which means all 3 are open/short. Ive tested all three they test a 5.8 ohms and when hooked to a battery they work fine. Does this mean I have a wiring problem
My Malibu won't go backwards and don't go fast forward codes po700 and po776 do I need a new transmission
Thank you
You're welcome
Hello there, Greetings from Dubai,
Could you please tell me how did you cleaned the screen. With carburetor cleaner? What will remove the gunk?
Hi Asif. I used compressed air.
@@CarsNToys Thank you for your swift reply. I will use the same.
P1750 ACURA - Mechanical Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid
What if it works but when you plug it. Then turn the key on, engine off. It starts to buzz and make clicking noises.
my acura TL has the same problem with this solenoid, I have performed a test with the multimeter and the recharge is 05.9 onm, could you tell me if this recharge is good or bad?
Edgard Israel Sabino Madrigal I did the test also and got same reading as you 0.59 ohm. Reinstall and same code appear p0730, p0740 and p0780.
Resistance 5.9 OHM ---- this is within spec, but doesn't guarantee that solenoid is good. Ultimate test is - does it move every time you apply battery power. If it does, it works correctly.
This can be code p0741?
?
Did you find out if it also causes p0741?
@@snowyowl9132 no
@@chuloramirez7388 Have you done any work on it?
Great video but maybe you should specify what car that is
I think it's acura TL
@@DJAmovement agreed, good observation
He did in other comments prior. It's an 06' Acura TL
Great vid. But man am I trying hard to find a video for the same thing p0776 code on my 2015 accord coupe v6. Any suggestions op or chat?
my valve was stuck open and i drove it for 3 days will that brake my transmission
No.
Which car was this for ??
Thanks dude
Happy to help.
I have a 22005 Chrysler 300 when I crank it up it will go in to gear after driving it for 20 minutes or stop the engine is still on but the car won't move nothing on the dash I can cut it off an crank it again sometimes it will let me go in to drive it start to whine an then it won't go into drive at all what's wrong
What is the part number for valve c
I have 03 cL type s have a code p1750 and I need ur help please help me out ..
Where I can buy this clutch?…. For a 2013 Altima
I would like to know where to buy it for Altima 2013 too, I have same problem! Any news? Or part number
Is this where the metal shaving come from ?
no , they come from the internal gears grinding inside the sealed transmission due to heat and friction.. hondas need an extra transmission cooler installed outside the transmission because Honda builds bad transmissions back then with older models so that they would break and you would buy the newer model .. marketing scheme just like everything else going on in the world.. 8 out of 10 times tranny needs to be rebuilt... thats why nobody ever responds in the comments when people ask if it fixed their problem or not lol🤣
P0747 issue, part number for the ccs a and b
Wat is the sintoms wen that part os broke?
Car model?
Anyone here able to provide help. Honda Pilot error code 76-3. Clutch pressure control solenoid valve a stuck off. Struggling with acceleration some shift jerking. Looks like it goes into limp mode.
If the little screen clogged up will the car not move
I suppose it's possible.
Where can i find the part because am having trouble finding it
Dealer may be the only place to purchase one. A used one may be on ebay. Cheers.
Did you find one I can't find one either and every where I check it just shows the stepper motor so I bought one of them