Oil Pressure Sensor Testing With Basic Tools - How To DIY

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 มี.ค. 2021
  • In this video I show the simple ways you can test a single wire or a 2 wire oil pressure switch for operation, I go through the whole process step by step so you will be able to test to see if yours is faulty.
    f I helped ya out and you would like to buy me a drink ko-fi.com/gerardburke
    Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
    Tool options that I recommend and use. www.amazon.co.uk/shop/gerardb...
    ➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
    Disclaimer:
    GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
    Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
    #OilPressureSwitch #HowTo #AutomotiveDIY
  • ยานยนต์และพาหนะ

ความคิดเห็น • 55

  • @streetbobheaven4068
    @streetbobheaven4068 10 หลายเดือนก่อน +4

    Great video, you’re actually explaining the fundamentals and operations of a sensor/switch rather than just being a parts changer. Awesome job. Need more instructional videos like this on the internet.

  • @anthonywolbert1973
    @anthonywolbert1973 หลายเดือนก่อน +1

    Very thorough. Excellent teaching.

  • @lgwappo
    @lgwappo 5 หลายเดือนก่อน +2

    Very helpful. I will do this tomorrow. I got an oil pressure light on my motorcycle today.

  • @patkelly7999
    @patkelly7999 3 ปีที่แล้ว +3

    Invaluable advice, Thank you Gerard 👌👍🙏☘️

  • @kellismith4329
    @kellismith4329 ปีที่แล้ว

    Nice multimeter, I have a fluke 77 for 30 something years and love it !

  • @MiracleMAX
    @MiracleMAX 3 ปีที่แล้ว +4

    Good advice Gerard, thanks for sharing!

  • @richbrookes9297
    @richbrookes9297 3 ปีที่แล้ว +3

    Brilliant advice thank you, very handy to know.

  • @barriesmith6028
    @barriesmith6028 8 หลายเดือนก่อน +1

    Hi great Video very clear .can I ask you if I can use y compression test kit to check oil pressure? Regards barrie

  • @djsuperkimo
    @djsuperkimo 2 หลายเดือนก่อน +1

    Good Job ..... 1980 Mechanic ... didn't realize you can do this test ... 1st I've heard. Thanks Man. My Oil Light Is Blinking On and Off .... Oil was low .. filled it up with 2 bottles and the light still flickering. Car is running fine I think LOL 😂 😂 could be the sensor because when the car is off for hours, when you start it .. the OIL light is off .. goes on during 2,500 RPM in driving mode ..

    • @levicallis459
      @levicallis459 หลายเดือนก่อน

      Is your low oil pressure light on ? Usually if it's not on when you start , then you actually have low oil pressure , meaning you gotta replace the o ring in your oil pan , or your oil pump

  • @simonndhlovu6395
    @simonndhlovu6395 ปีที่แล้ว +2

    very educative

  • @ttautogarages
    @ttautogarages ปีที่แล้ว +2

    great video

  • @mianriaz1181
    @mianriaz1181 ปีที่แล้ว +1

    What number key should I be using to open the transmission sensor?

  • @nerogudani6731
    @nerogudani6731 ปีที่แล้ว

    Can u please tell me where to locate the one for 2008 chevrolet captiva 2.4 Z24SED

  • @richieosei7605
    @richieosei7605 ปีที่แล้ว

    Good day, please I have 2012 Hyundai sonata hybrid with oil light keep turning on and off. I have flushed the engine, changed the oil sensor and oil pump but to no avail. Can you please help me out?

  • @gheorghedumitrascu6998
    @gheorghedumitrascu6998 11 หลายเดือนก่อน

    I have a question, when i start my engine i have more than half oil/ good oil pressure. After 15-20mins when the engine is hot drop to zero right away. Like zero oil pressure. Why would do that? Please let me know. My vehicle is 2014 ford f150 .Thank you

  • @user-ml2tp8no6m
    @user-ml2tp8no6m 2 ปีที่แล้ว

    Cool

  • @maryrobert-zu7os
    @maryrobert-zu7os 7 วันที่ผ่านมา

    Can you please tell me where is the fuel tank sensor located on a 07 Chevrolet Impala car

  • @levicallis459
    @levicallis459 หลายเดือนก่อน

    Do you know how the wiring works on these ? I'm swapping the wire on one on an 04, but all the wires are different , except black to black

  • @lisandrofernandes
    @lisandrofernandes 3 ปีที่แล้ว

    I think there is a problem with my card but I'd to send a video to see if you can get it, thanks

  • @midnightrider6985
    @midnightrider6985 3 ปีที่แล้ว

    Should put link to your garage in the description

  • @maryrobert-zu7os
    @maryrobert-zu7os 7 วันที่ผ่านมา

    Can you please till me where is the fuel tank located on a 07 Chevrolet Impala car

  • @pequodexpress
    @pequodexpress 2 ปีที่แล้ว +2

    I have a Holden 3.8L V6 Ecotec that takes a one-pin sensor. What would happen if I were to install a three-pin sensor? Some models take a three-pin; others take a one-pin.

    • @chasedavis2358
      @chasedavis2358 2 ปีที่แล้ว +2

      Your connector won’t fit

  • @IntradeMotors
    @IntradeMotors 3 ปีที่แล้ว +1

    i had one piss out of the pin like a founrain on the one pin. Crawled under it and replaced it on the side of the road at repco parts store. I still have the faulty one.

    • @GerardBurkeBurkesGarage
      @GerardBurkeBurkesGarage  3 ปีที่แล้ว

      That must have been lovely 😕
      They can fail pretty bad alright but at least it was in stock 😅

  • @kelvinzulu9624
    @kelvinzulu9624 ปีที่แล้ว

    how can bypass a pressure sensor with three cables,sender,line and earthing

  • @Grungeb4by_1983
    @Grungeb4by_1983 3 ปีที่แล้ว +1

    Fault code p252f on Mitsubishi asx keep saying check engine oil levels on dash I’ve changed oil my car has a cheap scanner on it so I’ve monitored the the dpf regeneration and it good, would you know how I would get rid of this (check engine oil levels light) could it be the oil pressure sensor faulty

    • @falkirk8413
      @falkirk8413 ปีที่แล้ว

      Sump oil sensor

    • @Grungeb4by_1983
      @Grungeb4by_1983 ปีที่แล้ว

      @@falkirk8413 fix this ages ago you need a bi directional scanner to initialise the oil to 1550cc to zero. code finally gone it caused by short trip and the dpf not doing a regen also can be caused by a leak for the intercooler pipe my hose had a hole in it

  • @iankelly2110
    @iankelly2110 3 ปีที่แล้ว +1

    had a few fail and oil travel up the wiring loom.

  • @halimudinulfati594
    @halimudinulfati594 ปีที่แล้ว

    Toyota Corolla 2010, if you change the oil in the car, when the oil is in head 2, the car makes a noise. What is the problem?

    • @murphnturph2664
      @murphnturph2664 ปีที่แล้ว

      The lifters are probably ticking as the oil has to be pumped back up into the crankcase.

  • @neurobits
    @neurobits 2 ปีที่แล้ว

    Gracias!

  • @Isaac-47517
    @Isaac-47517 2 หลายเดือนก่อน +2

    helpful vid. ty. on a side note, you sound Irish and also slightly Jamaican. Are you? tyia. also this is not in any way solicitation for any sexual response or activity

  • @RalphSampson...
    @RalphSampson... 2 ปีที่แล้ว

    Taking video lessons from Chris Fix?

  • @user-cg3ir2ru7u
    @user-cg3ir2ru7u 3 หลายเดือนก่อน

    What. About too high oil pressurel

  • @mrmark8603
    @mrmark8603 3 หลายเดือนก่อน

    Good grief! I think he's used to billing by the hour.

  • @eyeonart6865
    @eyeonart6865 ปีที่แล้ว +2

    Why waste all that time for a $8.95 cent part and simple to remove?

    • @frankmontez6853
      @frankmontez6853 ปีที่แล้ว

      Hey maybe you know so gonna ask how you’d fix broken wire going into this terminal for it ? Just get new terminal and splice into old wire? 2016 Ford Focus SE.

    • @ToyManFlyer1100
      @ToyManFlyer1100 ปีที่แล้ว +2

      Coz I replaced the original with 2 new ones....Oil pressure gauge still reads on the lower end of needle sweep....Thats why....

    • @risingelement
      @risingelement ปีที่แล้ว +4

      Mine is $45.00 lmao 🤣

    • @caminho7340
      @caminho7340 2 หลายเดือนก่อน

      Troubleshooting. Gaining info about your issue

    • @gq-cw6xi
      @gq-cw6xi 2 หลายเดือนก่อน

      How else is he going to get views drives me nuts when they fu cking natter on and on get to your fu cking vid.

  • @joe226825
    @joe226825 8 หลายเดือนก่อน

    You repeat yourself too many times. This video could have been done in in 2 minutes.

  • @ELee-fr4tr
    @ELee-fr4tr 3 หลายเดือนก่อน

    For a cheap part like this, this video is not practical to do all this testing

    • @MrSwaggaMatic
      @MrSwaggaMatic 3 หลายเดือนก่อน

      I came here because my car is boosted and wanted to know how to test . So all were useful to me but I get where you are coming from

    • @user-ce6wu8bn7f
      @user-ce6wu8bn7f 2 หลายเดือนก่อน

      I like to know when I find the fault not just guess at it. If you just replace the sensor without diagnosing the problem and if the problem persists you still need to test the sensor, or in your case maybe you would replace the muffler, or the o2 sensor or who knows what.

  • @maryrobert-zu7os
    @maryrobert-zu7os 7 วันที่ผ่านมา

    Can you please till me where is the fuel tank located on a 07 Chevrolet Impala car